The information in this guide is subject to change without notice.
Acer Incorporated makes no representations or warranties, either expressed or implied, with respect to the
contents hereof and specifically disclaims any warranties of merchantability or fitness for any particular
purpose. Any Acer Incorporated software described in this manual is sold or licensed "as is". Should the
programs prove defective following their purchase, the buyer (and not Acer Incorporated, its distributor, or its
dealer) assumes the entire cost of all necessary servicing, repair, and any incidental or consequential
damages resulting from any defect in the software.
Acer is a registered trademark of Acer Corporation.
Intel is a registered trademark of Intel Corporation.
Pentium and Pentium II/III are trademarks of Intel Corporation.
Other brand and product names are trademarks and/or registered trademarks of their respective holders.
III
Conventions
The following conventions are used in this manual:
SCREEN MESSAGESDenotes actual messages that appear
on screen.
NOTEGives bits and pieces of additional
information related to the current
topic.
WARNINGAlerts you to any damage that might
result from doing or not doing specific
actions.
CAUTIONGives precautionary measures to
avoid possible hardware or software
problems.
IMPORTANTReminds you to do specific actions
relevant to the accomplishment of
procedures.
IV
Preface
Before using this information and the product it supports, please read the following general information.
1.This Service Guide provides you with all technical information relating to the BASIC CONFIGURATION
decided for Acer's "global" product offering. To better fit local market requirements and enhance product
competitiveness, your regional office MAY have decided to extend the functionality of a machine (e.g.
add-on card, modem, or extra memory capability). These LOCALIZED FEATURES will NOT be covered
in this generic service guide. In such cases, please contact your regional offices or the responsible
personnel/channel to provide you with further technical details.
2.Please note WHEN ORDERING FRU PARTS, that you should check the most up-to-date information
available on your regional web or channel. If, for whatever reason, a part number change is made, it will
not be noted in the printed Service Guide. For ACER-AUTHORIZED SERVICE PROVIDERS, your Acer
office may have a DIFFERENT part number code to those given in the FRU list of this printed Service
Guide. You MUST use the list provided by your regional Acer office to order FRU parts for repair and
service of customer machines.
KWP AN: Bluetooth® 2.0+EDR (Enhanced Data Rate)
KLAN: Gigabit Ethernet; Wake-on-LAN ready
KModem: 56K ITU V.92 with PTT approval; Wake-on-Ring ready
I/O Ports
KExpressCard™/54 slot
KPC Card slot (one Type II)
K5-in-1 card reader (MS/MS PRO/MMC/SD/xD)
KFour USB 2.0 ports
KIEEE 1394 port
KFast Infrared (FIR) port (for selected models)
KExternal display (VGA) port
KS-video/TV-out (NTSC/PAL) port
KHeadphones/speaker/line-out jack
2Chapter 1
KLine-in jack
KMicrophone jack
KEthernet (RJ-45) port
KModem (RJ-11) port
KDC-in jack for AC adaptor
Environment
KTemperature:
jOperating: 5 °C to 35 °C
jNon-operating: -20 °C to 65 °C
KHumidity (non-condensing):
jOperating: 20% to 80%
jNon-operating: 20% to 80%
Chapter 13
System Block Diagram
CDROM
21
PATA
Finger print
33
22
22
2nd HDD
21
4 Port
BlueTooth
SATA
USB
MINI USB
HDD
21
SATA
USB x 4
USB
USB
CCD MM.3 /1.3
14
Line Out
(-)No SPDIF
RJ11
MDC Card
MODEM
31
22
AZALIA
16/17/18/19/20
USB
32.768KHz
AMP
GQ1410
INT SPKR.
GQ1432
AMP
31
SB600
25MHz
32.768KHz
Cardreader
Cardbus
1394
MIC In
ALC268
30
ATI
PCI BUS
OZ711
Line In
Codec
AZALIA
24.576MHz
INT MIC Array.
25MHz
10/11/12/13
PCI E x-4
RJ45
23
XFORM
23
88 8071E
Marvell
LAN
23
PCI E x-1
RSM690
PCIE x16
Mini Card
802.11 / / /abgn
29
29
PCI E x-1
PCI E x-1
ATI
PNFC22311
29
New card
OUT
16 16x
IN
(875 -605)RTMT
Power Switch
DIMM2
9
DDR II 533/667/800
HyperTransport
S gSocket11
4/5/6/7
CLK GEN.
9502ICS LPRS
DDR SODIMM2
DDR SODIMM2
DIMM1
9
DDR II 533/667/800
KRev G8.
AMD
G792
41
Pomona Texcoco Block Diagram/
Touch
Pad
33
KB
33
34
INT.
W X VSS25 80-
BIOS
Winbond
WPC8768
32
SPI
FIR
32
DEBUG
CONN.
34
KBC
LPC
LPC BUS
25/26
MMC SD/
41in
27
1394
CONN
27
MS MS Pro xD///
27
CPF2211
26
TypeII
PWR SW
Support
PCMCIA I F/
PCMCIA
SLOT
ATI MXM Card
28
DVI
28
LCD
14
CRT
15
3
14.318MHz
S Vedio-
15
4Chapter 1
Your Acer Notebook tour
After knowing your computer features, let us show you around your new TravelMate computer.
Front View
IconItemDescription
1MicrophoneInternal microphone for sound recording.
2Acer CrystalEye0.3 megapixel web camera for video
communication.
3Display screenAlso called Liquid-Crystal Display (LCD),
displays computer output.
4Easy-launch
buttons
5PalmrestComfortable support area for your hands when
6TouchpadTouch-sensitive pointing device which functions
7Click buttons (left,
center* and right)
Chapter 15
Buttons for launching frequently used programs.
you use the computer.
like a computer mouse.
The left and right buttons function like the left
and right mouse buttons.
*The center button serves as Acer BioProtect
fingerprint reader supporting Acer FingerNav 4way control function (manufacturing option) or a
4-way scroll button (manufacturing option).
IconItemDescription
Note:
8Status indicatorsLight-Emitting Diodes (LEDs) that light up to
show the status of the computer's functions and
components.
9KeyboardFor entering data into your computer.
10Power buttonTurns the computer on and off.
Closed Front View
IconItemDescription
1SpeakersLeft and right speakers deliver stereo audio output.
25-in-1 card readerAccepts Secure Digital (SD, MultiMediaCard
(MMC), Memory Stick (MS), Memory Stick Pro (MS
PRO), and xD-Picture Card.
Note: Only one card can operate at any given time.
3Line-in jackAccepts audio line-in devices (e.g., audio CD
player, stereo walkman, mp3 player)
Microphone jackAccepts inputs from external microphones.
Headphones/
speaker/line-out
jack
4Infrared portInterfaces with infrared devices (e.g., infrared
5Bluetooth
communication
switch
Wireless
communication
switch
6LatchLocks and releases the lid.
Connects to audio line-out devices
(e.g., speakers, headphones).
printer and IR-aware computer).
Enable/disable the Bluetooth function. Indicates the
status of Bluetooth communication (manufacturing
option).
Enable/disable the wireless function. Indicates the
status of wireless LAN communication
(manufacturing option).
6Chapter 1
Left View
#IconItemDescription
1Kensington lock slot Connects to a Kensington-compatible
computer security lock.
2Ethernet (RJ-45)
port
3External display
(VGA) port
4S-Video/TV-out
(NTSC/PAL) port
5USB 2.0 portConnects to USB 2.0 devices (e.g., USB
6IEEE 1394 port Connects to IEEE 1394 devices.
Connects to an Ethernet 10/100/1000-based
network.
Connects to a display device (e.g., external
monitor, LCD projector).
Connects to a television or display device with
S-video input.
mouse, USB camera).
7ExpressCard/54
slot
8PC Card slot eject
button
9PC Card slotAccepts one Type II PC Card.
Accepts one ExpressCard/54 module.
Ejects the PC Card from the slot.
Right View
IconItemDescription
1Optical driveInternal optical drive; accepts CDs or DVDs
2Optical disk
access indicator
3Optical drive eject
button
Lights up when the optical drive is active.
Ejects the optical disk from the drive.
Chapter 17
IconItemDescription
4Emergency eject
hole
Ejects the optical drive tray when the computer is
turned off.
Rear Panel
#IconItemDescription
1Three USB 2.0
ports
2Modem (RJ-11)
port
3DC-in jackConnects to an AC adapter.
Connect to USB 2.0 devices (e.g., USB
mouse, USB camera).
Connects to a phone line.
4Ventilation slotsEnable the computer to stay cool, even after
prolonged use.
Bottom Panel
IconItemDescription
1Memory
compartment
8Chapter 1
Houses the computer's main memory .
IconItemDescription
2Battery lockLocks the battery in position.
3Battery release
latch
4Battery bayHouses the computer's battery pack.
5Hard disk bayHouses the computer’s hard disk (secured with
6Ventilation slotsEnable the computer to stay cool, even after
Releases the battery to remove the battery pack.
screws)
prolonged use.
Indicators
The computer has several easy-to-read status indicators:
The front panel indicators are visible even when the computer cover is closed.
IconFunctionDescription
PowerIndicates the computer's power
status.
BatteryIndicates the computer's battery
status.
BluetoothIndicates the status of Bluetooth
communication.
Wireless LANIndicates the status of wireless LAN
communication.
HDDIndicates when the hard disk drive is
active.
Num LockLights up when Num Lock is
activated.
Caps LockLights up when Caps Lock is
activated.
NOTE: 1. Charging: The light shows amber when the battery is charging. 2. Fully charged: The light shows
green when in AC mode.
Chapter 19
Easy-Launch Buttons
1. Charging:
2. Fully charged:
"Acer
"Launch Manager" on page 51
Easy-launch buttonDefault application
There are several conveniently located easy-launch buttons. They are: mail Web browser, Empowering Key
““and one user-programmable button.
Press “ “ to run the Acer Empowering Technology. The mail and Web browser buttons are pre-set to email
and Internet programs, but can be reset by users. To set the Web browser, mail and programmable buttons,
run the Acer Launch Manager.
PUser-programmable
Three productivity keys give users one-touch access to protection and manageability features for a more
secure, smarter and easier way to work.
KLock key - runs the Windows® lock function to lock the notebook when you step out. If the laptop is
KPresentation key - minimizes open application windows and prepares the display for impressive
KSync key - instantly synchronizes your computer system to an external storage device, for convenient
IconProductivity keyDefault application
Launch keyDefault application
Acer Empowering Technology (userprogrammable)
Email application (user-programmable)
Internet browser (user-programmable)
equipped with Acer BioProtect, you only need to swipe your finger to log into Windows® again.
presentations.
and secure backup.
LockLaunch Windows Lock function
PresentationMinimizes your open windows and prepares your
display for presenting
SyncLaunch NTI Shadow
10Chapter 1
Touchpad Basics
The following teaches you how to use the touchpad:
KMove your finger across the touchpad (2) to move the cursor.
KPress the left (1) and right (4) buttons located beneath the touchpad to perform selection and execution
functions. These two buttons are similar to the left and right buttons on a mouse. Tapping on the
touchpad is the same as clicking the left button.
KUse the 4-way scroll (3) button to scroll up or down and move left or right a page. This button mimics
your cursor pressing on the right scroll bar of Windows applications.
FunctionLeft Button (1)
ExecuteClick twice
quickly
Right Button
(4)
Main touchpad
(2)
Tap twice (at
the same
speed as
doubleclicking the
mouse
button)
SelectClick onceTap once
DragClick and
hold, then use
finger to drag
the cursor on
the touchpad
Tap twice (at
the same
speed as
doubleclicking a
mouse
button) then
hold finger to
the touchpad
on the second
tap to drag
the cursor.
Access
Click once
context menu
Center button (3)
Chapter 111
FunctionLeft Button (1)
Right Button
(4)
Main touchpad
(2)
Center button (3)
ScrollClick and hold to move
up/down/left/right.
NOTE: When using the touchpad, keep it - and your fingers - dry and clean. The touchpad is sensitive to finger
movement; hence, the lighter the touch, the better the response. Tapping too hard will not increase the
touchpad’s responsiveness.
NOTE: By default, vertical and horizontal scrolling is enabled on your touchpad. It can be disabled under
Mouse settings in Windows Control Panel.
12Chapter 1
Using the Keyboard
The keyboard has full-sized keys and an embedded numeric keypad, separate cursor , lock, Windows, function
and special keys.
Lock Keys and embedded numeric keypad
The keyboard has three lock keys which you can toggle on and off.
Lock keyDescription
Caps LockWhen Caps Lock is on, all alphabetic characters typed are
in uppercase.
Num Lock
<Fn> + <F11>
Scroll Lock <Fn> +
<F12>
When Num Lock is on, the embedded keypad is in numeric mode. The
keys function as a calculator (complete with the arithmetic operators +, -,
*, and /). Use this mode when you need to do a lot of numeric data entry.
A better solution would be to connect an external keypad.
When Scroll Lock is on, the screen moves one line up or down when you
press the up or down arrow keys respectively. Scroll Lock does not work
with some applications.
The embedded numeric keypad functions like a desktop numeric keypad. It is indicated by small characters
located on the upper right corner of the keycaps. To simplify the keyboard legend, cursor-control key symbols
are not printed on the keys.
Desired accessNum Lock onNum Lock off
Number keys on
embedded keypad
Cursor-control keys
on embedded
keypad
Main keyboard
keys
Chapter 113
Type numbers in a normal manner.
Hold <Shift> while using cursorcontrol keys.
Hold <Fn> while typing letters on
embedded keypad.
Hold <Fn> while using cursorcontrol keys.
Type the letters in a normal
manner.
Windows Keys
The keyboard has two keys that perform Windows-specific functions.
KeyDescriptionKey
Windows
key
Application
key
Pressed alone, this key has the same effect as
clicking on the Windows Start button; it launches the
Start menu.
It can also be used with other keys to provide a
variety of functions:
<> : Open or close the Start menu
<> + <D>: Display the desktop
<> + <E>: Open Windows Explore
<> + <F>: Search for a file or folder
<> + <G>: Cycle through Sidebar gadgets
<> + <L>: Lock your computer (if you are
connected to a network domain), or switch users (if
you're not connected to a network domain)
<> + <M>: Minimizes all windows
<> + <R>: Open the Run dialog box
<> + <T>: Cycle through programs on the
taskbar
<> + <U>: Open Ease of Access Center
<> + <X>: Open Windows Mobility Center
<> + <BREAK>: Display the System Properties
dialog box
<> + <SHIFT+M>: Restore minimized windows
to the desktop
<> + <TAB>: Cycle through programs on the
taskbar by using Windows Flip 3-D
<> + <SPACEBAR>: Bring all gadgets to the
front and select Windows Sidebar
<CTRL> + <> + <F>: Search for computers (if
you are on a network)
<CTRL> + <> + <TAB>: Use the arrow keys to
cycle through programs on the taskbar by using
Windows Flip 3-D
Note: Depending on your edition of Windows Vista,
some shortcuts may not function as described.
This key has the same effect as clicking the right mouse button;
it opens the application's context menu.
Windows
key
Application
key
14Chapter 1
Hot Keys
The computer employs hotkeys or key combinations to access most of the computer’s controls like sreen
brightness, volume output and the BIOS utility.
To activate hot keys, press and hold the <Fn> key before pressing the other key in the hotkey combination.
HotkeyIconFunctionDescription
<Fn> + <F1>Hotkey helpDisplays help on hotkeys.
<Fn> + <F2>Acer eSettingsLaunches Acer eSettings in Acer Empowering
Technology.
<Fn> + <F3>Acer ePower
Management
<Fn> + <F4>SleepPuts the computer in Sleep mode.
<Fn> + <F5>Display toggleSwitches display output between the display
<Fn> + <F6>Screen blankTurns the display screen backlight off to save
<Fn> + <F7>Touchpad toggleTurns the internal touchpad on and off.
<Fn> + <F8>Speaker toggleTurns the speakers on and off.
<Fn> + <↑>Volume upIncreases the sound volume.
<Fn> + <↓>Volume downDecreases the sound volume.
<Fn> + <→>Brightness upIncreases the screen brightness.
<Fn> + <←>Brightness downDecreases the screen brightness.
Launches Acer ePower Management in Acer
Empowering Technology.
screen, external monitor (if connected) and
both.
power. Press any key to return.
Chapter 115
Special Key
You can locate the Euro symbol and the US dollar sign at the upper-center
and/or bottom-right of your keyboard.
The Euro symbol
1.Open a text editor or word processor.
2.Either press <> at the bottom-right of the keyboard, or hold <Alt Gr> and then press the <5> key at the
upper-center of the keyboard.
The US dollar sign
1.Open a text editor or word processor.
2.Either directly press the <> key at the bottom-right of the keyboard, or hold <Shift> and then press the
<4> key at the upper-center of the keyboard.
NOTE: This function varies by the operating system version.
NOTE: Some fonts and software do not support the Euro symbol. Please refer to www.microsoft.com/
typography/faq/faq12.htm for more information.
16Chapter 1
Acer Empowering Technology
The Empowering Technology toolbar makes it easy for you to access frequently used functions and manage
your new Acersystem. Displayed by default in the upper half of your screen, it provides access to the following
utilities:
KAcer eNet Management hooks up to location-based networks intelligently.
KAcer ePower Management optimizes battery usage via customizable power plans.
KAcer ePresentation Management connects to a projector and adjusts display settings.
KAcer eDataSecurity Management protects data with passwords and encryption.
KAcer eLock Management limits access to external storage media.
KAcer eRecovery Management backs up andrecovers data flexibly, reliably
and completely.
KAcer eSettings Management accesses system information and adjusts settings easily.
For more information, right click on the Empowering Technology toolbar, then select the "Help" or "Tutorial"
function.
Empowering Technology password
Before using Acer eLock Management and Acer eRecovery Management, you must initialize the Empowering
Technology password. Right-click on the Empowering Technology toolbar and select "Password Setup" to do
so. If you have not initialized the Empowering Technology password and run Acer eLock Management or Acer
eRecovery Management, you will be asked to create it.
NOTE: If you lose the Empowering Technology password, there is no way to reset it except by reformatting
your system. Make sure to remember or write down your password!
Acer eNet Management
Acer eNet Management helps you quickly connect to both wired and wireless networks in a variety of
locations. To access this utility, select "Acer eNet Management" from the Empowering Technology toolbar or
run the program from the Acer Empowering Technology program group in Start menu. You can also set Acer
eNet Management to start automatically when you boot up your PC.
Acer eNet Management automatically detects the best settings for a new location, while offering you the option
to manually adjust the settings to match your needs.
Chapter 117
Acer eNet Management can save network settings for a location to a profile, and automatically switch to the
appropriate profile when you move from one location to another. Settings stored include network connection
settings (IP and DNS settings, wireless AP details, etc.), as well as default printer settings. Security and safety
concerns mean that Acer eNet Management does not store username and password information.
18Chapter 1
Acer ePower Management
Acer ePower Management features a straightforward user interface for configuring your power management
options. To access this utility, select "Acer ePower Management" from the Empowering Technology toolbar,
run the program from the Acer Empowering Technology program group in Start menu, or right-click the
Windows power icon in the system tray and select "Acer ePower Management".
Using power plans
Acer ePower Management comes with three predefined power plans: Balanced, High performance and Power
saver. You can also create customized power plans. You can create, switch between, edit, delete and restore
power plans, as described below.
View and adjust settings for On Battery and Plugged In modes by clicking the appropriate tabs. You can open
Windows power options by clicking "More Power Options".
NOTE: You cannot delete the predefined power plans.
To create a new power plan:
Creating customized power plans allows you to save and quickly switch to a personalized set of power
options.
1.Click the Create Power Plan icon.
2.Enter a name for your new power plan.
3.Choose a predefined power plan to base your customized plan on.
4.If necessary, change the display and sleep settings you want your computer to use.
5.Click "OK" to save your new power plan.
Chapter 119
To switch between power plans:
1.Select the power plan you wish to switch to from the drop-down list.
2.Click "Apply".
To edit a power plan:
Editing a power plan allows you to adjust system settings like LCD brightness and CPU speed. You can also
turn on/off system components to extend battery life.
1.Switch to the power plan you wish to edit
2.Adjust settings as required.
3.Click "Apply" to save your new settings.
To delete a power plan:
Y ou cannot delete the power plan you are currently using. If you want to delete the active power plan, switch to
another one first.
1.Select the power plan you wish to delete from the drop-down list.
2.Click the Delete Power Plan icon.
Battery status
For real-time battery life estimates based on current usage, refer to the panel in the upper half of the window.
Click the to view estimated battery life in sleep and hibernate modes.
Acer ePresentation Management
Acer ePresentation Management lets you project your computer's display to an external display device or
projector using the hotkey: <Fn> + <F5>. If auto-detection hardware is implemented in the system and the
external display supports it, your system display will be automatically switched out when an external display is
20Chapter 1
Loading...
+ 150 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.