Acer PH730 Quick Start Guide
Quick Start
Quick Start
INSTALLATION
1. Power Cord
2. VGA Cable
3. Composite Video Cable
4. USB Cable
5. 3 RCA Component Cable
6. S-Video Cable
7. Audio Cable Jack/RCA (Optional)
8. RS232 Cable (Optional)
9. DVI Cable (Optional)
10. HDMI Cable (Optional)
11. Audio Cable Jack/Jack
INTERFACE CONNECTOR
English
RGB
1
11
7
5
6
S-Video Output
Video Output
DVD Player,
Settop Box,
HDTV receiver
3
10
DVI
USB
4
RS232
2
9
8
Connecting to a Computer
1. Ensure the projector and your computer are turned off.
2. Connect one end of the VGA cable
to the “VGA In” connector on the
projector; connect the other end
to the VGA connector on the computer and tighten the screws.
3. Connect one end of the power cord
into the AC power socket on the
projector; connect the other end to
an electrical outlet.
Powering On the Projector
1. Open the lens cap.
2. Turn on the projector first and then
the computer.
3. Adjust the position, focus and zoom.
4. Run you presentation.
Powering Off the Projector
1. Press the power button twice.
2. Do not remote AC power cord from
outlet until the projector fan shut
down.
Loading...