Acer P5207B Owner's Manual

Acer Projector

P5207B/N217E/PN-X15K/P5207i/

N217R/PN-X15F/P5307WB/N227E/

PN-W15K/P5307Wi/N227R/PN-W15F

Series User's Guide

Acer Projector P5207B/N217E/PN-X15K/P5207i/ N217R/PN-X15F/P5307WB/N227E/PN-W15K/ P5307Wi/N227R/PN-W15F Series User's Guide Original Issue: 03/2013

Changes may be made periodically to the information in this publication without obligation to notify any person of such revisions or changes. Such changes will be incorporated in new editions of this manual or supplementary documents and publications. This company makes no representations or warranties, either expressed or implied, with respect to the contents hereof and specifically disclaims the implied warranties of merchantability or fitness for a particular purpose.

Record the model number, serial number, purchase date and place of purchase information in the space provided below. The serial number and model number are recorded on the label affixed to your projector. All correspondence concerning your unit should include the serial number, model number and purchase information.

No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronically, mechanically, by photocopy, recording or otherwise, without the prior written permission of Acer Incorporated.

Acer Projector P5207B/N217E/PN-X15K/P5207i/ N217R/PN-X15F/P5307WB/N227E/PN-W15K/ P5307Wi/N227R/PN-W15F Series

Model number: __________________________________

Serial number: ___________________________________

Date of purchase: ________________________________

Place of purchase: ________________________________

Acer and the Acer logo are registered trademarks of Acer Incorporated. Other companies' product names or trademarks are used herein for identification purposes only and belong to their respective companies.

"HDMI registered trademarks of HDMI Licensing LLC."

, the HDMI logo and High-Definition Multimedia Interface are trademarks or

Information for Your Safety and Comfort

Read these instructions carefully. Keep this document for future reference. Follow all warnings and instructions marked on the product.

Turning the product off before cleaning

Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.

Caution for plug as disconnecting device

Observe the following guidelines when connecting and disconnecting power to the external power supply unit:

• Install the power supply unit before connecting the power cord to the AC

power outlet.

• Unplug the power cord before removing the power supply unit from the

projector.

• If the system has multiple sources of power, disconnect power from the

system by unplugging all power cords from the power supplies.

Caution for Accessibility

Be sure that the power outlet you plug the power cord into is easily accessible and located as close to the equipment operator as possible. When you need to

disconnect power to the equipment, be sure to unplug the power cord from the electrical outlet.

iii

Warnings!

• Do not use this product near water.

• Do not place this product on an unstable cart, stand or table. If the product

falls, it could be seriously damaged.

• Slots and openings are provided for ventilation to ensure reliable

operation of the product and to protect it from overheating. These openings must not be blocked or covered. The openings should never be blocked by placing the product on a bed, sofa, rug or other similar surface.

This product should never be placed near or over a radiator or heat register, or in a built-in installation unless proper ventilation is provided.

• Never push objects of any kind into this product through cabinet slots as

they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind onto or into the product.

• To avoid damage of internal components and to prevent battery leakage,

do not place the product on a vibrating surface.

• Never use it under sporting, exercising, or any vibrating environment

which will probably cause unexpected short current or damage rotor devices or lamp.

Using electrical power

• This product should be operated from the type of power indicated on the

marking label. If you are not sure of the type of power available, consult your dealer or local power company.

• Do not allow anything to rest on the power cord. Do not locate this

product where people will walk on the cord.

• If an extension cord is used with this product, make sure that the total

ampere rating of the equipment plugged into the extension cord does not exceed the extension cord ampere rating. Also, make sure that the total rating of all products plugged into the wall outlet does not exceed the fuse rating.

• Do not overload a power outlet, strip or receptacle by plugging in too

many devices. The overall system load must not exceed 80% of the branch circuit rating. If power strips are used, the load should not exceed 80% of the power strip's input rating.

• This product's AC adapter is equipped with a three-wire grounded plug.

The plug only fits in a grounded power outlet. Make sure the power outlet is properly grounded before inserting the AC adapter plug. Do not insert the plug into a non-grounded power outlet. Contact your electrician for details.

Warning! The grounding pin is a safety feature. Using a power outlet that is not properly grounded may result in electric shock and/or injury.

Note: The grounding pin also provides good protection from unexpected noise produced by other nearby electrical devices that may interfere with the performance of this product.

• Use the product only with the supplied power supply cord set. If you need

to replace the power cord set, make sure that the new power cord meets the following requirements: detachable type, UL listed/CSA certified, VDE approved or its equivalent, 4.5 meters (14.76 feet) maximum length.

Product servicing

Do not attempt to service this product yourself, as opening or removing covers may expose you to dangerous voltage points or other risks. Refer all servicing to qualified service personnel.

Unplug this product from the wall outlet and refer servicing to qualified service personnel when:

• the power cord or plug is damaged, cut or frayed

• liquid was spilled into the product

• the product was exposed to rain or water

• the product has been dropped or the case has been damaged

• the product exhibits a distinct change in performance, indicating a need

for service

• the product does not operate normally after following the operating

instructions

Note: Adjust only those controls that are covered by the operating instructions, since improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to normal condition.

Warning! For safety reasons, do not use non-compliant parts when adding or changing components. Consult your reseller for purchase options.

Your device and its enhancements may contain small parts. Keep them out of the reach of small children.

Additional safety information

• Do not look into the projector's lens when the lamp is on. The bright light

may hurt your eyes.

• Turn on the projector first and then signal sources.

• Do not place the product in the following environments:

• Space that is poorly ventilated or confined. At least 50cm clearance from walls and free flow of air around the projector are necessary.

• Locations where temperatures may become excessively high, such as inside of a car with all windows rolled up.

• Locations where excessive humidity, dust, or cigarette smoke may contaminate optical components, shorten the life span and darken the image.

• Locations near fire alarms.

• Locations with an ambient temperature above 40 ºC/104 ºF.

• Locations where the altitudes are higher than 10000 feet.

• Unplug immediately if there is something wrong with your projector. Do

not operate if smoke, strange noise or odor comes out of your projector. It

might cause fire or electric shock. In this case, unplug immediately and contact your dealer.

• Do not keep using this product to break or drop it. In this case contact your

dealer for inspection.

• Do not face the projector lens to the sun. It can lead to fire.

• When switching the projector off, please ensure the projector completes

its cooling cycle before disconnecting power.

• Do not frequently turn off the main power abruptly or unplug the

projector during operation. The best way is to wait for the fan to stop before turning main power off.

• Do not touch the air outlet grille and bottom plate which become hot.

• Clean the air filter frequently. The temperature inside may rise and cause

damage when the filter/ventilation slots are clogged with dirt or dust.

• Do not look into the air outlet grille when projector is operating. It may

hurt your eyes.

• Always open the lens shutter or remove the lens cap when the projector is

on.

• Do not block the projector lens with any object when the projector is

under operation as this could cause the object to become heated and deformed or even cause a fire. To temporarily turn off the lamp, press HIDE on the remote control.

• The lamp becomes extremely hot during operation. Allow the projector to

cool for approximately 45 minutes prior to removing the lamp assembly for replacement.

• Do not operate lamps beyond the rated lamp life. It could cause it to break

on rare occasions.

• Never replace the lamp assembly or any electronic components unless the

projector is unplugged.

• The product will detect the life of the lamp itself. Please be sure to change

the lamp when warning messages display.

• When changing the lamp, please allow the projector to cool down, and

follow all changing instructions.

• Reset the "Lamp Hour Reset" function from the Onscreen Display

"Management" menu after replacing the lamp module.

• Do not attempt to disassemble this projector. There are dangerous high

voltages inside which may hurt you. The only user serviceable part is the lamp which has its own removable cover. Refer servicing only to suitable qualified professional service personnel.

• Do not stand the projector on end vertically. It may cause the projector to

fall over, causing injury or damage.

• This product is capable of displaying inverted images for ceiling mount

installation. Only use acer ceiling mount kit for mounting the projector and ensure it is securely installed.

vii

"Lamp(s) contain Mercury, Dispose Properly."

Caution for Listening

To protect your hearing, follow these instructions.

• Increase the volume gradually until you can hear clearly and comfortably.

• Do not increase the volume level after your ears have adjusted.

• Do not listen to music at high volumes for extended periods.

• Do not increase the volume to block out noisy surroundings.

• Decrease the volume if you can't hear people speaking near you.

Disposal instructions

Do not throw this electronic device into the trash when discarding. To minimize pollution and ensure utmost protection of the global environment, please recycle. For more information on the Waste from Electrical and Electronics Equipment (WEEE) regulations, visit http://www.acer-group.com/public/ Sustainability/sustainability01.htm

Mercury advisory

For projectors or electronic products containing an LCD/CRT monitor or display:

Lamp(s) inside this product contain mercury and must be recycled or disposed of according to local, state or federal laws. For more information, contact the Electronic Industries Alliance at www.eiae.org. For lamp-specific disposal information, check www.lamprecycle.org

viii

First Thing First

Usage Notes

Do:

• Turn off the product before cleaning.

• Use a soft cloth moistened with mild detergent to clean the display

housing.

• Disconnect the power plug from AC outlet if the product is not being used

for a long period of time.

Don't:

• Block the slots and openings on the projector provided for ventilation.

• Use abrasive cleaners, waxes or solvents to clean the unit.

• Use under the following conditions:

• In extremely hot, cold or humid environments.

• In areas susceptible to excessive dust and dirt.

• Near any appliance that generates a strong magnetic field.

• Place in direct sunlight.

Precautions

Follow all warnings, precautions and maintenance as recommended in this user's guide to maximize the life of your unit.

Warning:

• Do not look into the projector's lens when the lamp is on. The bright light may hurt

your eyes.

• To reduce the risk of fire or electric shock, do not expose this product to rain or

moisture.

• Please do not open or disassemble the product as this may cause electric shock.

• When changing the lamp, please allow the projector to cool down, and follow all

changing instructions.

• This product will detect the life of the lamp itself. Please be sure to change the lamp

when it shows warning messages.

• Reset the "Lamp Hour Reset" function from the Onscreen Display "Management"

menu after replacing the lamp module.

• When switching the projector off, please ensure the projector completes its cooling

cycle before disconnecting power.

• Turn on the projector first and then the signal sources.

• Do not use lens cap when projector is in operation.

• When the lamp reaches the end of its life, it will burn out and may make a loud

popping sound. If this happens, the projector will not turn back on until the lamp module has been replaced. To replace the lamp, follow the procedures listed under "Replacing the Lamp".

Information for Your Safety and Comfort iii

First Thing First viii

Usage Notes viii

Precautions viii

Introduction 1

Product Features 1

Package Overview 2

Projector Overview 3

Projector Outlook 3

Control Panel 4

Remote Control Layout 5

Getting Started 7

Connecting the Projector 7

Turning the Projector On/Off 8

Turning On the Projector 8

Turning Off the Projector 9

Adjusting the Projected Image 10

Adjusting the Height of the Projected Image 10

How to Optimize Image Size and Distance 11

How to Get a Preferred Image Size by Adjusting Distance and Zoom 13

User Controls 15

Installation Menu 15

Acer Empowering Technology 16

Onscreen Display (OSD) Menus 18

Color 19

Image 21

Setting 24

Management 28

Audio 29

3D 30

Language 31

Appendices 32

Troubleshooting 32

LED & Alarm Definition Listing 36

Replacing the Lamp 37

Ceiling Mount Installation 38

Specifications 41

Compatibility Modes 43

Regulations and safety notices 47

English

Introduction

Product Features

This product is a single-chip DLP® projector, including the following outstanding features:

• DLP

• Enables projecting 3D content via DLP Link Technology

• Acer ColorBoost technology delivers vivid, life-like images

• High brightness and contrast ratio

• Versatile display modes enable optimum performance in any situation

• NTSC/PAL/SECAM compatible and HDTV (720p, 1080i, 1080p) supported

• Lower power consumption and economy (ECO) mode extends lamp life

• Dynamic Black / ExtremeEco functions help decrease lamp power

• Acer EcoProjection Technology delivers Intelligent power management

• Empowering Key reveals Acer Empowering Technology functions for easy

• Advanced keystone correction delivers optimum presentations

• Multi-language Onscreen Display (OSD) menus

• Manual focus projection lens zooms up to 1.6X

• 2X digital zoom and pan move function

• Microsoft

• Enjoy media playback via USB and RAM.

• LAN settings enable remote management of projectors via a web browser

• Crestron compliant

technology P5207B/N217E/PN-X15K/P5207i/ N217R/PN-X15F: Native 1024 x 768 XGA resolution, Auto/4:3/16:9 aspect ratio supported P5307WB/N227E/PN-W15K/P5307Wi/N227R/PN-W15F: Native 1280 x 800 WXGA resolution,Auto/Full/4:3/16:9/L.Box aspect ratio supported

consumption and further extend lamp life.

- Dynamic Black: If turned on, the projector dynamically adjusts the power

consumption of the lamp according to the brightness of the image being projected. When projecting darker images the power consumption will be reduced and the contrast of the image will also be enhanced.

- ExtremeEco: The projector will decrease the power consumption of the

lamp by up to 70% when no input signal can be detected for 5 seconds.

approach and physical efficiency improvement

adjustment of settings

Windows® 2000, XP, 7, Vista®, Macintosh OS compliant

English

Package Overview

This projector comes with all the items shown below. Check to make sure you have them all. Contact your dealer immediately if any thing is missing.

Projector Power cord VGA cable

Composite video cable Security card User’s guide (CD-ROM)

Remote control Quick start guide Battery x 2

Acer Projector Multi-media

(CD-ROM)

Dust filter

(Optional)

Acer Projector Multi-media

quick start guide

WiFi adapter

(Optional)

Carrying case

(Optional)

English

Projector Overview

Projector Outlook

Front/upper side

2 3

# Description # Description 1 Power key and Power indicator LED 5 Control panel 2 Projection lens 6 Zoom ring 3 Elevator button 7 Focus ring 4 Lens cap 8 Remote control receiver

Rear side

47683 521 9 10 11

DC OUT

12 1214

# Description # Description 1 Remote control receiver 9 S-Video input connector 2 Mini USB connector 3 LAN (RJ45 port for 10/100M

Ethernet)

Composite video input connector

10 Audio input connector

Audio output connector 4 HDMI connector 11 Microphone input connector 5 USB connector (Type A)

Component video input

connector 6 RS232 connector 12 Tilt adjusting wheel 7 Monitor loop-through output

13 Power socket

connector

8 Analog RGB signal/HDTV/

component video input connector

14 12V DC output connector 15 Kensington™ lock port

English

Control Panel

1 2

5 6

# Function Description 1 LAMP Lamp Indicator LED. 2POWER indicator

LED 3 Power key Refer to the "Turning the Projector On/Off" section. 4 Keystone Adjusts image distortion caused by tilting projection

5 MENU Launches the Onscreen Display (OSD) menu, returns to

6BACK

Stop 7 TEMP Temp Indicator LED. 8 SOURCE Chooses RGB, component video, S-Video, composite

9 Four directional

selection keys

Refer to the "Turning the Projector On/Off" section.

(±40 degrees).

the previous step for the OSD menu operation or exits the OSD menu.

Goes back to the previous selection. Stops the playing media files.

video, HDMI ,HDTV, LAN/WiFi, Media, DLNA or USB B source.

Selects items or makes adjustments to your selection. When the OSD menu is not displayed:

• Press the and keys to adjust projector’s

internal speaker volume.

• Press the and keys to adjust image

distortion caused by tilting projection (+ degrees).

10 ENTER

Play/Pause

Confirms your selection of items. Plays/Pauses the playing media files.

English

Remote Control Layout

A-38100

CAUTION

LASER RADIATIONDO NOT STARE INTO BEAM

MAX OUTPUT: <1mW WAVE LENGTH: 650nm

CLASS II LASER PRODUCT

LASER RADIATION DO NOT STARE INTO BEAM CLASS 2 LASER PRODUCT

This product complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007.

LASER MODULE : M - 5.2 - 6.5 x 12 - 6 x 6

MC.JG211.004

# Function Description

1 Infrared

transmitter 2 POWER Refer to the "Turning the Projector On/Off" section. 3 FREEZE To pause the screen image. 4 RESYNC Automatically synchronizes the projector to the input

5 BACK Goes back to the previous selection. 6 Keystone Adjusts image distortion caused by tilting projection

Four directional select keys

Sends signals to the projector.

source.

(±40 degrees).

Selects items or makes adjustments to your selection. When the OSD menu is not displayed, press the < and > keys to adjust projector’s internal speaker volume.

7 MEDIA HOME Goes to MEDIA HOME page. 8Four

Selects the media files in four directions. directional select pad

9 VOL +/- Increases/decreases the volume. 10 Empowering key Enables unique Acer functions: eView, eTimer, ePower

Management, e3D.

English

# Function Description

12 VGA To change source to VGA. This connector supports

13 COMPONENT To change source to Component video. This connector

14 SD/USB A To change source to SD/USB A. This projector only

15 HDMI™/DVI To change source to HDMI™/DVI (for the model with

16 Keypad 0~9 Press "0~9" to input a password in the "Setting >

17 Laser pointer

18 HIDE Press "HIDE" to hide screen image; press again to

19 ASPECT RATIO To choose the desired aspect ratio. 20 SOURCE Press to open the Source

Rewind Play/Pause Stop Fast-forward

window

Rewinds/Plays/Pauses/Stops/Fast-forwards the playing media files.

analog RGB, YPbPr (480p/576p/720p/1080i/1080p), and YCbCr (480i/576i).

supports YPbPr.

supports files in JPEG/BMP format.

HDMI™/DVI connector).

Security" OSD. Shines the laser point light when the Laser button is

pressed.

display the image.

menu that allows you to select an input signal source.

21 ZOOM Zooms the projector display in or out. 22 ENTER Confirms your selection of items. 23

Laser

24 MENU Launches the Onscreen Display (OSD) menu, returns to

25 MEDIA SETUP Opens MEDIA SETUP page. 26 PAGE ^/v For computer mode only. Use the button to select the

27 S-VIDEO To change source to S-Video. 28 VIDEO To change source to Composite video. 29 USB B To change source to USB B. 30 LAN/WiFi To change source to LAN/WiFi.

Emits visible laser pointer light for presentation purposes. This function is not available for the projectors sold in the Japanese market.

the previous step for the OSD menu operation or exits the OSD menu.

next or previous page. This function is only available when connected to a computer via a USB cable.

English

Getting Started

RS232

RBG

HDTV adapter

D-Sub

USB

DC OUT

DVD player, Set-top

box, HDTV receiver

VGA

RS232

Video/S-Video Output

Display

Speakers

Microphone

Screen

Connecting the Projector

# Description # Description

1 Power cord 8 HDMI cable

2 VGA cable 9 3 RCA component cable

3 VGA to component video/HDTV

adapter

4 Composite video cable 11 USB cable

5 Audio cable 12 12V DC cable

6 S-Video cable 13* USB storage device/USB Wifi adapter

7 RS232 cable 14 Microphone

Note: To ensure the projector works well with your computer, please make sure the timing of the display mode is compatible with the projector.

Note: "*" USB drive limitation, do not support power.

10 RJ45 cable

(Optional)

English

2 & 3

Lens cap

Turning the Projector On/Off

Turning On the Projector

1 Remove the lens cap.

2 Ensure that the power cord and signal cable are securely connected.

The Power LED will light red.

3 Turn on the projector by pressing (POWER) on the control panel or

remote control, and the Power indicator LED will turn blue.

4 Turn on your source (computer, notebook, video player, etc.).

• If the screen displays "No Signal", please make sure the signal cables are securely connected.

• If you connect to multiple sources at the same time, use "SOURCE" on the control panel or remote control, or the direct source key on the remote control to switch between inputs.

+ 42 hidden pages

Acer P5207B Owner's Manual

Acer Projector

Information for Your Safety and Comfort

First Thing First

Usage Notes

Precautions

Contents

Introduction

Product Features

Package Overview

Projector Overview

Getting Started

Connecting the Projector

Turning the Projector On/Off