Acer P1201B Quick Guide

1

Acer Projector Gateway

Introduction

The Acer Projector Gateway (APG) is a smart, integrated system that enhances
presentations via your Acer projector. The APG provides versatile source
connectivity, the latest eProjection Management tools, support for video
playback via the built-in decoder and more.

APG features:

• High-performance wireless projection via a built-in access point featuring a
lossless CODEC or an RJ-45 port for wired connections.

• Playback of any audio content through the projector's built-in speakers for
added effect.

• Visitors can easily launch Acer eProjection Management automatically by
inserting the Acer Plug-and-Show token (using the Windows autorun
function) into the source’s USB port, or by installing the software via an
Internet browser. A driver disc is not required.

• Presents a user-friendly graphic interface for simple setup and operation.

• Allows presenters to connect to the Internet or corporate Intranet to
retrieve interactive content during presentations.

• Supports up to four presentations at the same time under split-screen
projection mode.

• Supports remote control functions for projector operation.

• Makes wireless or wired connections via 802.11b/g, 802.11b/g/n or an
Ethernet 10/100-based network.

• Acer Projector Gateway Web Management enables a web-based control of
Acer projector for both Windows and Mac OS.

• Wireless network security (WEP, WPA-PSK, WPA2-PSK).

• MobiShow technology allows wireless projection from a Wi-Fi-enabled
smartphone.

• Acer Multiple Projector Control Center is a PC utility which allows one PC
to control all projectors that are connected to a LAN.

• Crestron compliance.

• Media playback via a USB port.

English

2

Guide to components

English

This table discusses the hardware features of the APG:

12

# Component Description

1 WLAN antenna

connector
2 Mini USB Projects PC screen via mini USB.
3 USB port Connects to a USB flash drive for multimedia playback.

4 Reset button Resets the APG.
5 Power indicator Indicates the APG’s power status.
6 LAN port Connects to an Ethernet 10/100-based network.

Note: The APG provides advanced projector functions when you
enter supervisor mode. Set a supervisor password and enable full
control of system settings with the convenience of remote control.

Note: The antenna is only required for wireless models.

Connects to a wireless LAN antenna.
(only for wireless models)

Or connects to a USB Wi-Fi dongle (optional).

3

5

4

6

Note: The antenna is not required when a USB Wi-Fi dongle
(optional) installed.

Important: Acer recommends setting up the projector name (SSID)
and supervisor password when using the projector for the first
time.

Note: Projector name (SSID) is only required for wireless models.

3

System Requirements

• Acer eProjection Management software installed or Acer PnS token ready.

Note: Acer PnS token is an optional accessory.

• Computer CPU - Intel Pentium III-800 MHz (or greater).

• Computer memory - 256 MB of RAM required, 512 MB or more
recommended.

• Hard disk - 10 MB of available hard disk space.

• Display - Super VGA supporting 800 x 600, 16-bit high color or higher­resolution display recommended (PC and display).

• Ethernet adapter (10/100 Mb/s) for an Ethernet connection.

• Video application - Upgrading to Windows Media Player (WMP) v.10 or
above is recommended.

OS support

• Windows Microsoft Windows 2000 with Service Pack 4 or later.

• Windows XP Home or Professional 32-bit Service Pack 3 or later.

• Windows Vista 32- and 64-bit Service Pack 2 or later.

• Macintosh OS V10.5 and above.

• Windows 7 32- and 64-bit.

Browser support

• Microsoft Internet Explorer 6.0 / 7.0 and above.

• Firefox 1.5 / 2.0 and above.

• Safari 4.0 and above.

English

4

Connect to the projector

English

Before you begin projecting, you will need to do the following things:

Turn on and connect to the network

Press the Power button on the bundled remote control or the device to turn on
your Acer projector and enable the WLAN (only for wireless models or models a
USB Wi-Fi dongle installed). Connecting the projector to the LAN for a wired
connection is also recommended.

LAMP

TEMP

SOURCE

MENU

Cable / ADSL

Modem

Internet

RESYNC

APG / AP

DHCP Server

USB B

USB A1 USB A2

RESET

POWER

5

Check the information on the splash screen

Take note of the important information on the splash screen. The splash screen
displays the following items: Projector ID (a), Acer logo (b), network
information (c) and instructions (d).

Projector ID (displayed only when available)

This 4-digit number will not be displayed on the top left of the splash screen
until this option is enabled by the supervisor in the Configure tab under Acer
eProjection Management. The four digits are given randomly for projector
identification. For more information, please see General Settings on page 27.

English

Projector Name (SSID)

The Projector Name and initial Service Set ID (SSID) can be added by the
supervisor on the Configure tab of Acer eProjection Management. For more
information, please see Network Settings on page 28.

Server IP

The Server IP indicates the IP address your projector uses to connect to a wired
or wireless network. It will be 192.168.100.10 for general wireless and wired
connections. The Server IP will be assigned by the wired network with DHCP
enabled. For more information, please see Network Settings on page 28.

Security: (None, WEP, WPA-PSK, WPA2-PSK)

Wired Equivalent Privacy or Wireless Encryption Protocol (WEP) is a scheme to
secure wireless networks. It is part of the IEEE 802.11 wireless networking

English

6

standard. WPA-PSK (Wi-Fi Protected Access - pre-shared key) and WPA2-PSK are
other individual encryption methods with higher level security. The option is
enabled by the supervisor in the Configure tab under Acer eProjection
Management. For more information, please see Security Settings on page 29.

Note: Projector name (SSID) and security are only required for
wireless models.

Note: When turning the LAN or Wi-Fi on via the projector OSD,
please remember to change the projector source to "LAN/WiFi".
Use the keypad or remote control to change the projector source.

Follow the instructions on the splash screen to connect and project

1 Make a note of the Projector ID, Projector Name (SSID), Server IP and

Security option on the splash screen. A secure key needs to be used when
Security is enabled.

7

2 Enable your WLAN and select the access point labeled AcerProjector or

AcerProjectorXXXX to connect wirelessly. Connect the projector to your
LAN for a wired connection.

Internet

3 Open the Internet browser (see note). Click Download Acer eProjection

Management on the welcome page, and then click Run to launch the
Welcome to the Acer Projector Gateway Setup Wizard. The installation will
proceed automatically. Make sure the installation is complete.

English

Note: If you do not see the welcome page or cannot connect to
the wired network, please enter the Server IP address (the second

English

8

item listed under the Acer logo on the splash screen) into your
browser’s address bar.

Note: Ensure that you have administrator-level permission on your
computer so that you can install the software.

Note: If you receive any security warnings, click OK to proceed
with the installation procedure.

Note: The Acer eProjection Management shortcut will be created
in desktop when the installation is complete.

Note: Visitors can also insert the optional Acer PnS token using the
Windows autorun function into a USB port of your system.

Note: If your PC cannot perform the autorun function of the PnS
token, please execute AcerProjectorGatewayW5.exe from the PnS
token manually.

y

a

e

a

w

t

G

r

c

o

t

e

j

o

r

P

s

s

e

l

e

r

i

W

Note: You can make a PnS token by yourself by clicking the Make
PnS Token button from the CD welcome page. The Acer PnS
Token is a standard accessory on some projector models.

4 Acer eProjection Management will execute automatically and search for

your Acer projector.

Note: Make sure your personal firewall does not block the Acer
eProjection Management application.

9

English

5 When the search is complete, a login dialog box will open to ask you to

enter the User name and Projector ID (if needed) to log in to your Acer
Projector.

6 The UI will look as it does below when your source successfully connects

and begins projecting in 1024 x 768 mode.

English

10

Note: For the best projection performance, Acer recommends
adjusting your resolution to 1024 x 768.

11

Acer eProjection Management

Acer eProjection Management helps you connect to, and control Acer
projectors with the integrated APG. By allowing the transmission of high­quality audio and video signals, the APG offers added flexibility and
convenience, allowing you to use an Acer projector in almost any room or
setting.

For first time installation

The utility can be downloaded directly from the projector using a wireless or
wired network connection.

The software will be set up on any PC in just a few minutes, without needing
any discs.

Security

Acer eProjection Management supports PIN code security, protecting the Acer
projector from unauthorized access and use.

Wireless communication between the Acer projector and PC are protected using
unique, image-based encryption to prevent eavesdropping or modification of
the video signal.

Simple GUI for one-click projection

The easy-to-use GUI enables one-click usability in finding and connecting to the
wireless projector, changing display settings, and controlling the projector.

It also supports up to four simultaneous presentations.

English

Onscreen remote

An onscreen remote utility gives any user the ability to control functions of the
projector without the owner worrying about the loss of or damage to the
projector's remote handset, or worn-out batteries.

12

Compact user interface

English

The compact user interface (UI) provides a solid look and feel.

• Allows you to change the projection resolution (a).

To change the projection resolution, click Resolution to reveal a list of
choices.

• Project using split-screen or full-screen (b).

To project from multiple sources, move the cursor over the split screen icon
and click to display the content in the location indicated on the split
screen.

• Start or stop projecting (c)

• Switch to video (d).

13

You can also select video clips to display from the compact window by
clicking the arrow on the left of the screen.

Select a video clip, and click the Play icon to load, and the Stop icon to
stop the playback.

Note: The video formats supported are MPEG2, MPEG4 and H.264
(optional). Connect via the LAN for better performance if playing
video. The full rate will be 30 fps depending on the video format.

Note: Please install audio driver VAC_Setup.exe from the CD to
display the video clip with audio.

English

Note: APG does not support projection to extended screen.

• Change to full UI (e).

14

Full user interface

English

You can click the down arrow to reveal the full UI from the compact UI.

The Main tab of the full UI displays Projector ID, Projector IP and User name
information (a), and gives you the option to select a different wireless projector
(b). Swap to another connected PC via Switch presenter (c). You may also install
Acer eProjection Management via a PnS token by clicking Install (d) or make
another token via Save P&P Program to (e). About (f) displays version
information of Acer eProjection Management.

15

Projecting with MobiShow

MobiShow allows content projection from a Wi-Fi-enabled smartphone or PDA
running Windows Mobile 5 and higher. Any type of screen content or a
PowerPoint slideshow (requires conversion with the included utility) can be
projected.

Installing MobiShow

For devices running Windows Mobile, the installation CD contains a MobiShow
installation file.

1 Click Install MobiShow to download the software installer (in CAB format)

to your mobile device.

2 Open your device’s file explorer and locate the CAB file.

3 Double-click the CAB file to start installation.

4 Follow the onscreen instructions to finish installation.

Note: Please make sure your device has at least 10 MB of available
space.

Connect to a wireless projector

Enable Wi-Fi on your mobile device and connect to the wireless projector in the
same way as you would from a PC. Please refer to Connect to the projector on
page 4. Refer to the IP address shown on the projected screen and the SSID
displayed onscreen (default SSID is AcerProjectorGateway).

English

Note: MobiShow only supports wireless projectors. You may also
use a USB Wi-Fi dongle plugged into a USB type A host on the
projector.

Other support

Mobishow also supports iPhone, please download the MobiShow installer from
App Store.

Note: The support of Android smartphone will be available when
it’s released to Android Market.

English

16

Using MobiShow

1Open Programs on your device and find the MobiShow application.

2 Tap the MobiShow icon to launch the client software.

3 MobiShow will turn on your device’s Wi-Fi and display available access

points for you to choose.

4 The MobiShow client will automatically search for wireless projectors (SSID

with prefix AcerProjectorGateway) and connect.

5 If more than one projector is found, the following list is displayed for you

to select the one to use.

6 When a wireless projector is found, it will automatically log in and show

the following main menu.

Note: The MobiShow Media function is optional.

17

Select which feature to use. To project your phone’s screen, tap the Screen icon.
To do a PC-less presentation using Presentation-to-Go (PtG), tap PtG. To play a
video or MP3 from your device, tap Media.

Project the device’s screen

MobiShow will project anything displayed on your screen. You may launch
another application (such as PowerPoint Viewer) or open any file (such as a
Word document or JPG image) and it will be displayed via the projector. Control
the projection using the following commands:

Icon Item Description

Stop Tap to stop projecting.

Pause Tap to pause projecting; tap again to resume.

English

Zoom Tap to zoom the projected screen to extend the

longest side of your image to fill the screen.

Play Tap to restart projecting if it is stopped.

/

OK/Back Tap to return to main menu.

Photo To display a photo (in JPG format) from your device,

tap Photo.

Note: Screen projection is not supported on the iPhone.

English

18

Wireless PtG

Install the PtG converter from the installation CD on your PC; this will enable
you to convert PowerPoint files to PtG format.

When you select PtG, the MobiShow client will automatically open Explorer for
you to select a PtG file. Select the file to open for your presentation. When the
file is open, the PtG slides will be projected while you will be shown controls on
your device screen. The slides are projected fullscreen with all the effects of the
original PowerPoint slides preserved.

Icon Item Description

Prev / Next Tap to go to the previous or next item on the slide.

PgUp / PgDn Tap to go to previous or next slide.

Stop Tap to stop projecting the file. The icon will become

Play if the file is not being played. Tap Play to
restart the presentation.

Home Tap to go to the first slide.

Jump Tap and MobiShow client will show thumbnails of

every slide in the PtG file. You can select any page
to go to.

Open Tap to select another PtG file.

Note: PtG supports 800 x 600 and 1024 x 768 resolutions.

19

Photo reviewer

When you select the Photo function, MobiShow will automatically open
Explorer for you to select a photo folder. Open a file (JPG format) and controls
show on your device's screen.

Icon Item Description

Prev / Next Tap to go to the previous or next photo.

Play Tap to restart projecting.

Open Tap to select another file.

English

English

20

Media

When you select the Media function, MobiShow will automatically open
Explorer for you to select a media file. Select a file (videos in mpeg2, mpeg4 or
H.264 format, or MP3 music files) to play. When the file is open, the media will
be projected and controls shown on your device’s screen.

Icon Item Description

Rewind /
Fast Forward

Vol- / Vol+ Tap to adjust playback volume.

Stop Tap to stop playing the file. The icon will become

Mute Tap to mute the audio. Tap Mute again to restore

Open Tap to select another media file.

Tap to seek backward or forward.

Play if the file is not playing. Tap Play to restart
playback.

the volume.

When you are in the main menu, tap OK or Back to close the application.

Note: The Media function is optional.
Note: Media projection is not supported on the iPhone.

21

Help

Tap Menu to select Help to find MobiShow information.

Using the PtG converter

To use the Presentation-to-Go feature, you need to install the PtG Converter on
your PC from the CD. Put the CD into your CD-ROM and follow the onscreen
instructions to install the PtG Converter.

Open Programs > PtG Utility > PtG Converter from the Start menu. The
following control panel is displayed on your desktop.

Click Convert to select a PowerPoint file and start conversion. PtG Converter will
open the PowerPoint file and convert it to PtG format. You can see the
conversion process on your desktop.

Click Preview to expand or collapse the preview pane. Click Play to pl ay back the
selected PtG file or click Open to select a different PtG file.

English

22

Acer Projector Gateway Web

English

Management

Open the Internet browser, you will be redirected to the Acer Projector
Gateway Web Management main page. If you aren’t redirected, you can enter
the Server IP address. Please refer to Connect to the projector on page 4.

The default IP address is 192.168.100.10 for general wireless connections.

Download the client software

You can download and install the program for different platforms.

1 Acer eProjection Management application for Windows.

1 MobiShow for mobile devices running Windows Mobile v5.0.

1 Mac Utility Client for Mac OS.

1 Crestron RoomView.

After the program is installed a shortcut will be placed on the desktop.

Note: You also can install from the installation CD.

Note: If you are using Internet Explorer 8, please disable the
SmartScreen Filter before downloading.

Conference projecting

You can initiate conference projecting from the Web Management webpage.

23

English

Clicking on Initiate Conference gives you control over who is projecting at any
time, and prevents the current presenter from being disconnected
inadvertently.

Once a conference has been initiated, all the persons connected to the projector
are displayed in a list. The active user is indicated by a check mark next to the

English

24

user icon and a triangular icon . Inactive users are indicated by a square

icon. To activate a user, click on the play this user icon next to the user’s name.

Click End Conference to end the conference.

Note: Please remember to log out if you want to end the
conference.

Note: Up to 32 users in the same conference room may connect.

25

Advanced settings

The default login for the advanced settings page is

123456

.

Console

The Console page gives you access to a variety of status and control features to
adjust the projection settings. From this page, you can view projection status;

admin

with the password

English

English

26

adjust brightness, contrast and aspect ratio; change the source; and adjust some
advanced settings. You can also turn off the projector directly from this page.

27

Configure

The Configure page allows you to change a variety of settings.

English

General Settings

You can check Enter the projector ID to start projecting to ensure that only
people in the room are able to access the projector. You can also select who can
connect to the Internet via the projector’s WLAN router - either all the meeting
attendees, or only the person currently projecting.

Note: The APG needs to reboot to apply changes made in
Configure mode. Please connect to the projector again if you
want to continue to use it.

English

28

Network Settings

Click Network settings to adjust other network settings.

Note: The default Projector Name (SSID) is
leaves 11 characters available for you to customize the name.

Note: Projector name (SSID) is only required for wireless models.

AcerProjector

. This

29

Security Settings

If you are projecting sensitive information, you may want to set up a WEP or
WPA-PSK key by clicking Security Settings.

The WEP key can support from 64- up to 128-bit encryption for wireless
connections. This feature can be set and enabled by the supervisor. You must
enter 5 or 13 ASCII characters, or 10 or 26 hexadecimal characters. The WPA­PSK/WPA2-PSK encryption key should be entered as 8 to 63 ASCII characters.
This feature can be set and enabled by the supervisor.

Note: ASCII (American Standard Code for Information
Interchange) is a code for representing characters as “0-9, a-z, A-Z,
!, @, #, $, %, &, *, -, _, +,=, /, ?“are allowed. Hexadecimal digits
consist of the numbers 0-9 and the letters A-F/a-f.

English

Note: If you are using Windows XP, you need to apply the WPA2­PSK hotfix from Microsoft.

Note: Enabling WPA-PSK/WPA2-PSK increases the computing load,
which may affect projection performance.

Note: Security is only required for wireless models.

English

30

Admin Password Setup

Change the password to log in to the Advance page by clicking Admin Password
Setup. The default supervisor password is

123456

.

Firmware Upgrade

Ensure the projector is connected to the LAN and the Internet, then click on
Firmware upgrade and click the Upgrade… button. The projector will access the
Internet to automatically download and install any available upgrades.

31

Alert Setting

English

Logout

Click Logout to return to the download page.

English

32

Note: If you are using Internet Explorer 8, please adjust the
Compatibility view settings to make ensure correct display.

33

Crestron control tool

When you open your Internet browser, you will find a Crestron link on the Acer
Projector Gateway Web Management main page. Tap the link to open an
interactive Flash-based webpage.

Main page

English

You can control the projector from the easy-to-use interface, adjusting the
volume; changing the source; and projector settings. For more information,
please visit www.crestron.com and www.crestron.com/getroomview.

English

34

Tools

You can view projector IP information here, modify networking settings and set
up a password if desired.

Info

You can find projector information easily on this page and add information to
help you manage each projector.

35

Mac Utility for Mac OS

1 You can project a Mac screen via WPS-Pro.

2 Obtain the installation program from the CD or download from the main

webpage. Please refer to page 7.

3 Make sure your personal firewall allows the WPS-Pro software to pass

through. A WPS-Pro shortcut will be created on your desktop.

English

English

36

4 Enter the login code from the splash screen, please refer to Check the

information on the splash screen on page 5, if required and click OK to start
projecting.

5 The UI shown below will appear when you have connected to the projector

and are projecting at 1024 x 768 resolution.

37

Compact and full user interface

Presentation mode

Icon Description

Project desktop screen to full-screen or split-screen.

Full-screen projection.

Project to Split #1.

Project to Split #2.

Project to Split #3.

Project to Split #4.

Pause projecting.

Stop projecting.

Zoom.

English

Projector login code.

While projecting, this icon blinks.

Video mode

Icon Description

Start playing video.

38

Stop playing video.

English

Open video file.

Adjust volume.

Volume level indicator.

Video time bar.

While playing video, this icon blinks.

About

Icon Description

Click to open the function menu and select Web Admin to open
the management web page. Please refer to Acer Projector Gateway
Web Management on page 22.

Minimize the program

Exit the program

39

Contact IT help

If you encounter any problems, you can use this message window in the upper­right corner of the page to communicate in real time with the Helpdesk.

English

40

Multimedia

English

Introduction

The Acer multimedia support offers easier projection without a PC or
multimedia player connected. Through USB type A slot, you can easily access
PtG (please refer to PtG on page 42) and JPG photo files. This function is
supported through the projector source USB A. Use the keypad or remote
control to select the source.

Multimedia Features

• Fancy and stylish user interface for better experience.

• Supports USB memory stick via USB type A slot.

• Supports PowerPoint slideshow by PtG files and high resolution JPG photos
playback.

Connecting a multimedia device to the projector

2

1

# Component Description

1 Mini USB Projects the PC screen via mini USB (USB B).
2 USB Type A Connects to a USB flash drive for multimedia

playback.
3 Reset button Restarts the APG.
4 Power indicator Indicates the APG's power status.

4

3

Note:
a. USB flash drive needs to be formatted using FAT32.
b. The USB flash drive may only have one logical partition.

41

Control panel and remote control

Icon Component Description

RESYNC Back or stop function in multimedia controls.
SOURCE Enter or play under certain control conditions.
Back Up one data folder level.
Enter Confirms item selection.
MENU Goes back or stops in multimedia controls.
Direction Keys

Pre./Rewind Goes to previous index or page in file list view.

Press or to select items or control volume
while playing media.

Press for Enter or play function in most
multimedia controls.

Press to go back in most multimedia controls.

English

Next/Fast forward Goes to next index or page in file list view.

Play/Pause Plays or pauses media playback.
Stop Stops playing media file.
SD/USB A Changes source to USB A (no SD function).
USB B Changes source to USB B (please refer to Display

Empowering Key Enter or play under certain control conditions.

over USB on page 45).

42

Presentation to Go

English

If you sent the projector source to USB A, you will see the screen as shown
below.

PtG

Click to access PtG files.

You can use PtG converter (please refer to Using the PtG converter on page 21)
to convert files from PowerPoint format to PtG format, which allows you to
project from a variety of devices while retaining all the effects of the
PowerPoint file.

Photo

Click to display JPG files.

You can use the navigation keys to choose files from thumbnails or file listing.
Press Enter or the Empowering Key to create a slideshow that displays photos
using the full screen.

Note: The photo file size must be smaller than 10 MB, and the
resolution under 8192 x 6144 pixels. Supports playback of JPG
images with EXIF information.

Setup

Adjust display settings.

43

English

44

Remote Desktop

English

Introduction

Remote Desktop is a handy remote access feature which allows you to
seamlessly control your computer from an Acer Projector when in the meeting
room. You can operate your computer via the projector using the remote
control via a standard USB keyboard and mouse.

Plug-and-play, supports all standard USB keyboards and mouses

It's easy to use a standard wireless or wired USB keyboard and mouse to fully
control your computer from in front of the projector.

1 Turn on the Acer Projector.

2 Plug the USB keyboard/mouse receiver or wired USB keyboard or mouse

into a free USB port on the Acer projector.

3 Connect the computer to the projector using Wireless or LAN, then execute

Acer eProjection Management software to project the computer’s screen.

4 The USB devices will be automatically detected, and you can control

computer via Remote Desktop.

Note: Remote Desktop is only supported for full-screen projection.

45

Display over USB

Introduction

Display over USB (DoUSB) projection is an easy-to-use function to project a
computer’s screen using a single USB cable (USB type A to mini USB) without
needing any drivers.

If you unplug the USB cable, the projector will stop projecting and revert to
standby status.

How to start DoUSB

1 Set the projector source to

USB B

. The screen below will be shown.

English

2 Connect the USB cable to the projector and computer: Plug the mini USB

into the projector and type A USB into the computer.

3 Unplug the USB cable to stop DoUSB.

Note: Only one computer can be connected at a time.

Support All PC Screen Resolutions

Through an auto-detecting and auto-adjusting/auto-stretching algorithm, all
NB/PC screen resolutions can be supported and wirelessly projected.

• If the current resolution setting at the NB/PC side is smaller than the
current projector resolution, APG will adjust the current NB/PC resolution
to the optimum projection resolution in order to project the best image.

• If the current resolution settings of the NB/PC and projector are the same,

English

46

the same optimum projection resolution will be implemented.

• If the current resolution setting of the NB/PC is larger than the current
projector resolution, APG will change the PC's resolution to match the
projector for better performance.

Operating system compatibility

The DoUSB function is compatible with Microsoft Windows XP with Service Pack
2 and above, Windows Vista 32- and 64-bit, and Windows 7 32- and 64-bit.

English

Features Table

47

Modelname P1100C/

WiFi NA

RJ45 Ethernet Jack -- V V V V V

Audio Out (Mini Jack) -- -- -- -- -- --

USB Type A X2 -- X2 X2 X2 X2

USB Type B X1 X1 X1 X1 X1 X1

SD Card Slot -- -- -- -- -- --

LAN/WiFi I/O

Reset Button V V V V V V

Status LED V V V V V V

Antenna Jack -- -- -- -- X1 --

Application (Network, PC & Mac)

(1) DoLAN : Ethernet
projection

(2) DoWiFi : WiFi projection

(3) Quad-View (4-split
screen)

(4) HD video playback -- -- -- -- -- --

(5) SD video playback -- -- -- -- -- --

(6) PtG converter & viewer V -- V V V V

(7) Wireless security (WEP/
WPA/WPA2)

(8) Remote desktop -- -- V V V V

(9) CD-less installation V V V V V V

(10) PnS Token -- -- -- -- -- V

Features

(11) Make PnS Token via CD V V V V V V

(12) Vista OS compliant
(Upto Vista SP1 and above)

(13) MAC OS (10.4/10.5 and
above)

(14) Window 7 compliant V V V V V V

Web-based Management Page (Network)

(1) Download page NA V V V V V

(2) Conference Control NA V V V V V

(3) Console (projector
control & monitor)

(4) Network setting NA V V V V V

(5) Crestron Flash link -- V V V V V

P1200C

Yes (by USB

adapter)

Yes (by USB

adapter)

P1100A/
P1200A

-- V V V V V

WiFi

VVV VVV

WiFi

VVV VVV

VVV VVV

NA V V V V V

P1200B/
P1300WB

Yes (by USB

--

WiFi

adapter)

-- Yes (by USB
WiFi

adapter)

P1201B/
P1203PB

Yes (by
USB WiFi
adapter)

Yes (by
USB WiFi
adapter)

P1200i P1201i

802.11b/g/n;

802.11b/g for Russia

VYes (by

VYes (by

USB WiFi
adapter)

USB WiFi
adapter)

48

English

Modelname P1100C/

MobiShow (Network)

(1) Win Mobile V5 & above
supported

(2) Screen projection

(3) Quad-View (4-split
screen)

(4) PtG function

(5) Media sender -- -- -- -- -- V

(6) Photo viewer V V V V V V

(7) iPhone supported

(8) Android supported -- -- -- V -- V

Features

Crestron (Network)

(1) RoomView (App.)
Control & Interactive
messaging & Text
broadcasting

(2) Flash GUI (Web) Control
& Interactive

USB functionality

(1) DoUSB : projecting by
USB type B

(2) Remote Desktop(KB/
Mouse) by USB type A

(3) HD video playback -- -- -- -- -- --

(4) JPEG Viewer V -- V V V V

(5) Presentation-to-go (PtG) V -- V V V V

Remote Controller V V V V V V

Wireless CD V V V V V V

Wireless QG V V V V V V

Detachable Antenna -- -- -- -- x1 --

Accessory

Wireless PnS(Plug and
Show) Token

P1200C

Yes (by USB

adapter)

Yes (by USB

adapter)

Yes (by USB

adapter)

Yes (by USB

adapter)

Yes (by USB

adapter)

P1100A/
P1200A

WiFi

WiFi

WiFi

WiFi

WiFi

-- V V V V V

-- V V V V V

VVV VVV

V--V VVV

-- -- -- -- -- --

P1200B/
P1300WB

VV

VV

VV

VV

-- V

P1201B/
P1203PB

USB WiFi
adapter)

USB WiFi
adapter)

USB WiFi
adapter)

USB WiFi
adapter)

USB WiFi
adapter)

Yes (by

Yes (by

Yes (by

Yes (by

Yes (by

P1200i P1201i

V

V

V

V

V

Yes (by
USB WiFi
adapter)

Yes (by
USB WiFi
adapter)

Yes (by
USB WiFi
adapter)

Yes (by
USB WiFi
adapter)

Yes (by
USB WiFi
adapter)

49

Troubleshooting

If you experience a problem with your Acer projector, refer to the following
troubleshooting guide. If the problem persists, please contact your local reseller
or service center.

Problems and Solution

# Problem Solution

1 The projector stops

responding to all
controls

2 Lamp burns out or

makes a popping
sound

3 Image or projector

problems

4 Unable to read the

USB device

If possible, turn off the projector, then unplug
the power cord and wait at least 30 seconds
before reconnecting power.

When the lamp reaches the end of its useful life,
it will burn out and may make a loud popping
sound. If this happens, the projector will not turn
on until the lamp module has been replaced. To
replace the lamp, follow the procedures in the
Replacing the Lamp section of your projector’s
manual.

Please refer to the troubleshooting section in
your projector’s manual.

Please make sure the USB device is in good
condition and properly inserted.
Remember that the projectors do not support
file formats other than FAT16/32.

English

5 USB drive fail USB port does not support USB hub function and

which power consumption is over 500mA.

6 Media file not

found or can’t be
opened from the
file list

Files that require a CODEC that is not supported
won’t be shown in the file list. Please check the
list of media formats supported.

50

Frequently asked questions

English

• How do I configure the network?

Auto-Configuration Network Setup: The default setting of the APG is as a
DHCP client. When the APG is connected to a LAN that already has a DHCP
server present, the APG takes the IP address assigned to it by the server.
When the APG is connected to a LAN that does not have a DHCP server, the
APG becomes the DHCP server in the network.

• Why doesn't my device obtain an IP address automatically?

The device will ask for an IP address from your enterprise DHCP server
while booting up, however, sometimes it might fail to obtain an IP address
in complex network environments. The system will obtain the IP address
again once there is another DHCP server detected or you can configure
your device IP address via Network Setup from the web admin page.

• How do I reset the APG to the factory setting?

Press the reset button and press the power button for 20 seconds to reset
to factory settings.

• What do I do if I'm not redirected to the APG's web page automatically?

1. Make sure you have connected to the APG.

2. Make sure your IP address is configured to Obtain an IP address
automatically or you have entered the proper IP address.

3. Turn off the your Internet browser’s proxy settings.

• What do I do if I can't enter the APG web page?

1. Make sure you have connected to the APG.

2. Make sure your IP address is configured as to Obtain an IP address
automatically or you have entered the proper IP address.

3. Turn off the your Internet browser’s proxy settings.

4. Open your browser again and you will be redirected to the APG's web
page automatically, or you can enter the device IP manually.

• What can I do if I can't download the APG application?

1. Make sure you have connected to the APG.

2. Make sure your IP address is configured to Obtain an IP address
automatically or you have entered the proper IP address.

3. Turn off the your Internet browser’s proxy settings.

4. Open your browser again and you will be redirected to the APG's web
automatically, or you can enter the device IP manually.

5. Download the application as required.

• Should I install the application again after upgrading the firmware?

Yes. Download and install the application again.

• What should I check for if I can't find the APG?

Is the PC connected to the APG?

51

Are there any personal firewalls enabled?

Due to your network or firewall settings, the client application may not be
able to connect to the projector server. Please make sure the settings allow
the application to be able to communicate with the server.

To enable wireless projection, your personal firewall needs to allow the
APG application to pass through.

Due to your firewall settings, the client application may not be able to
establish a connection for video streaming. Please make sure the firewall
settings allow the application to communicate with the server (inbound
TCP port: 1041).

• What are the possible connection combinations?

APG
connection

WLAN WLAN V X 192.168.100.10
WLAN WLAN +

WLAN +
Wired

WLAN +
Wired

Wired Wired V V By LAN DHCP address

Wired Other access

System Projector Internet Remark

Wired

WLAN V V By LAN DHCP address

WLAN +
Wired

point

V V 192.168.100.10

V V By LAN DHCP address

V V By LAN DHCP address

Please execute the application
first if you need to access the
Internet.

Please enter the IP address on
the welcome screen.

Please enter the IP address on
the welcome screen.

Please enter the IP address on
the welcome screen.

Please enter the IP address on
the welcome screen.

English

• How do I register the APG on the firewall exceptions list for Windows XP
SP2?

1. Click Start > Control Panel.

2. Click Security Center > Windows Firewall when the Control Panel
window opens.

3. Click the Exceptions tab and then Add Program… when the Windows
Firewall window opens.

4. Click Acer Projector Gateway to allow connection with external devices
under Programs when the Add a Program window opens.

• What is the Gatekeeper?

The Gatekeeper is designed to ensure enterprise network security for the
APG.

All Block blocks guest users from wireless access to the office LAN.

English

52

All Allow allows guest users to access the wireless office LAN.

Internet Only allows guest users to use the Internet wirelessly, while
restricting access to the Intranet.

• Can I use wireless and wired connections simultaneously?

If you have a wired Internet connection connected to the APG, it will
obtain an IP address automatically and allow wireless connectivity
simultaneously.

You have to configure the Gatekeeper setting to All Pass or Internet Only.

• Why is the wireless transfer rate slow?

The transfer rate may be slower in some operating environments
(depending on factors such as the location, distance or radio signals).

• Does the APG support audio projection while presenting?

No, APG can only project your PC’s screen without audio.

• What should I do if the display isn't smooth?

Try setting the resolution to 1024 x 768 for improved performance.

• Why is my presentation sluggish while presenting with the projector?

If your PC screen resolution is different to the device resolution, stretching
the screen data will require additional computing power which might
cause your PC to seem a little sluggish.

• Which video formats are supported?

MPEG1; MPEG2; MPEG4; WMV9; AVI; DivX 3.11, 4x, 5x; XviD; ASF; VOB
(without encryption)

• Video playback is not smooth.

The wireless transfer rate may be too slow or the video resolution may be
too high. Typically, the APG can support QCIF, CIF, 480P, 576P, 720P and
1080i resolution with full speed under optimum wireless environments.

• I get the error message

This error message appears when the file cannot be played due to possible
data corruption.

• Why doesn’t WPA2 work even after I enter the right password?

Check your operating system. Windows Vista supports WPA2, but Windows
XP doesn’t support WPA2. You can solve this problem by installing the
hotfix available from support.microsoft.com/kb/893357/en-us/, or by
upgrading to Windows XP SP3 (Service pack 3).

Cannot play this file. This file may be damaged.