Acer P1200N, P1200A, P1200, P1200B, P1100A User Manual

...

Download

Page 1

Acer Projector

P1100/P1100A/P1100C/P1200/

P1200A/P1200B/P1200C/P1200n/

P1200i/P1203/P1206/P1300WB/

P1303W Series

User's Guide

Page 2

Acer Projector P1100/P1100A/P1100C/P1200/P1200A/P1200B/P1200C/P1200n/P1200i/P1203/ P1206/P1300WB/P1303W Series User's Guide Original Issue: 04/2010

Changes may be made periodically to the information in this publication without obligation to notify any person of such revisions or changes. Such changes will be incorporated in new editions of this manual or supplementary documents and publications. This company makes no representations or warranties, either expressed or implied, with respect to the contents hereof and specifically disclaims the implied warranties of merchantability or fitness for a particular purpose.

Record the model number, serial number, purchase date and place of purchase information in the space provided below. The serial number and model number are recorded on the label affixed to your projector. All correspondence concerning your unit should include the serial number, model number and purchase information.

No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronically, mechanically, by photocopy, recording or otherwise, without the prior written permission of Acer Incorporated.

Acer Projector P1100/P1100A/P1100C/P1200/P1200A/P1200B/P1200C/P1200n/P1200i/P1203/ P1206/P1300WB/P1303W Series

Model number: __________________________________

Serial number: ___________________________________

Date of purchase: ________________________________

Place of purchase: ________________________________

Acer and the Acer logo are registered trademarks of Acer Incorporated. Other companies' product names or trademarks are used herein for identification purposes only and belong to their respective companies.

"HDMI™, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC."

Page 3

Information for your safety and comfort

Read these instructions carefully. Keep this document for future reference. Follow all warnings and instructions marked on the product.

Turning the product off before cleaning

Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.

Caution for plug as disconnecting device

Observe the following guidelines when connecting and disconnecting power to the external power supply unit:

• Install the power supply unit before connecting the power cord to the AC

power outlet.

• Unplug the power cord before removing the power supply unit from the

projector.

• If the system has multiple sources of power, disconnect power from the

system by unplugging all power cords from the power supplies.

Caution for Accessibility

Be sure that the power outlet you plug the power cord into is easily accessible and located as close to the equipment operator as possible. When you need to

disconnect power to the equipment, be sure to unplug the power cord from the electrical outlet.

iii

Warnings!

• Do not use this product near water.

• Do not place this product on an unstable cart, stand or table. If the product

falls, it could be seriously damaged.

• Slots and openings are provided for ventilation to ensure reliable

operation of the product and to protect it from overheating. These openings must not be blocked or covered. The openings should never be blocked by placing the product on a bed, sofa, rug or other similar surface.

This product should never be placed near or over a radiator or heat register, or in a built-in installation unless proper ventilation is provided.

• Never push objects of any kind into this product through cabinet slots as

they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind onto or into the product.

Page 4

• To avoid damage of internal components and to prevent battery leakage,

do not place the product on a vibrating surface.

• Never use it under sporting, exercising, or any vibrating environment

which will probably cause unexpected short current or damage rotor devices, lamp.

Using electrical power

• This product should be operated from the type of power indicated on the

marking label. If you are not sure of the type of power available, consult your dealer or local power company.

• Do not allow anything to rest on the power cord. Do not locate this

product where people will walk on the cord.

• If an extension cord is used with this product, make sure that the total

ampere rating of the equipment plugged into the extension cord does not exceed the extension cord ampere rating. Also, make sure that the total rating of all products plugged into the wall outlet does not exceed the fuse rating.

• Do not overload a power outlet, strip or receptacle by plugging in too

many devices. The overall system load must not exceed 80% of the branch circuit rating. If power strips are used, the load should not exceed 80% of the power strip's input rating.

• This product's AC adapter is equipped with a three-wire grounded plug.

The plug only fits in a grounded power outlet. Make sure the power outlet is properly grounded before inserting the AC adapter plug. Do not insert the plug into a non-grounded power outlet. Contact your electrician for details.

Warning! The grounding pin is a safety feature. Using a power outlet that is not properly grounded may result in electric shock and/or injury.

Note: The grounding pin also provides good protection from unexpected noise produced by other nearby electrical devices that may interfere with the performance of this product.

• Use the product only with the supplied power supply cord set. If you need

to replace the power cord set, make sure that the new power cord meets the following requirements: detachable type, UL listed/CSA certified, VDE approved or its equivalent, 4.6 meters (15 feet) maximum length.

Page 5

Product servicing

Do not attempt to service this product yourself, as opening or removing covers may expose you to dangerous voltage points or other risks. Refer all servicing to qualified service personnel.

Unplug this product from the wall outlet and refer servicing to qualified service personnel when:

• the power cord or plug is damaged, cut or frayed

• liquid was spilled into the product

• the product was exposed to rain or water

• the product has been dropped or the case has been damaged

• the product exhibits a distinct change in performance, indicating a need

for service

• the product does not operate normally after following the operating

instructions

Note: Adjust only those controls that are covered by the operating instructions, since improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to normal condition.

Warning! For safety reasons, do not use non-compliant parts when adding or changing components. Consult your reseller for purchase options.

Your device and its enhancements may contain small parts. Keep them out of the reach of small children.

Additional safety information

• Do not look into the projector's lens when the lamp is on. The bright may

hurt your eyes.

• Turn on the projector first and then signal sources

• Do not place the product in following environments:

• Space that is poorly ventilated or confined. At least 50cm clearance from walls and free flow of air around the projector is necessary.

• Locations where temperatures may become excessively high, such as inside of a car with all windows rolled up.

• Locations where excessive humidity, dust, or cigarette smoke may contaminate optical components, shortening the life span and darkening the image.

• Locations near fire alarms.

• Locations with an ambient temperature above 40 ºC/104 ºF.

• Locations where the altitudes are higher than 10000 feet.

• Unplug immediately if there is something wrong with your projector. Do

not operate if smoke, strange noise or odor comes out of your projector. It

Page 6

might cause fire or electric shock. In this case, unplug immediately and contact your dealer.

• Do not keep using this product to break or drop it. In this case contact your

dealer for inspection.

• Do not face the projector lens to the sun. It can lead to fire.

• When switching the projector off, suggest to ensure the projector

completes its cooling cycle before disconnecting power.

• Do not turn off the main power abruptly or unplug the projector during

operation. It can lead to lamp breakage, fire, electric shock or other trouble. The best way is to wait for the fan to turn off before turning main power off.

• Do not touch air outlet grille and bottom plate which becomes hot.

• Clean the air filter frequently if have. The temperature inside may rise and

cause damage when the filter/ventilation slots clogged with dirt or dust.

• Do not look into the air outlet grille when projector is operating. It may

hurt your eyes.

• Always open the lens shutter or remove the lens cap when the projector is

on.

• Do not block the projector lens with any object when the projector is

under operation as this could cause the object to become heated and deformed or even cause a fire. To temporarily turn off the lamp, press HIDE on the projector or remote controller.

• The lamp becomes extremely hot during operation. Allow the projector to

cool for approximately 45 minutes prior to removing the lamp assembly for replacement.

• Do not operate lamps beyond the rated lamp life. It could cause it to break

on rare occasions.

• Never replace the lamp assembly or any electronic components unless the

projector is unplugged.

• The product will detect the life of the lamp itself. Please be sure to change

the lamp when is showing warning message.

• When changing the lamp, please allow unit to cool down, and follow all

changing instructions.

• Reset the "Lamp Hour Reset" function from the Onscreen display

"Management" menu after replacing the lamp module.

• Do not attempt to disassemble this projector. There are dangerous high

voltages inside which may hurt you. The only user serviceable part is the lamp which has its own removable cover. Refer servicing only to suitable qualified professional service personnel.

• Do not stand the projector on end vertically. It may cause the projector to

fall over, causing injury or damage.

• This product is capable of displaying inverted images for ceiling mount

installation. Only use acer ceiling mount kit for mounting the projector and ensure it is securely installed.

Page 7

vii

Caution for Listening

To protect your hearing, follow these instructions.

• Increase the volume gradually until you can hear clearly and comfortably.

• Do not increase the volume level after your ears have adjusted.

• Do not listen to music at high volumes for extended periods.

• Do not increase the volume to block out noisy surroundings.

• Decrease the volume if you can't hear people speaking near you.

Disposal instructions

Do not throw this electronic device into the trash when discarding. To minimize pollution and ensure utmost protection of the global environment, please recycle. For more information on the Waste from Electrical and Electronics Equipment (WEEE) regulations, visit http://www.acer-group.com/public/ Sustainability/sustainability01.htm

Mercury advisory

For projectors or electronic products containing an LCD/CRT monitor or display:

“Lamp(s) contain Mercury, Dispose Properly.”

Lamp(s) inside this product contain mercury and must be recycled or disposed of according to local, state or federal laws. For more information, contact the Electronic Industries Alliance at www.eiae.org. For lamp-specific disposal information, check www.lamprecycle.org

Page 8

viii

First thing first

Usage notes

Do:

• Turn off the product before cleaning.

• Use a soft cloth moistened with mild detergent to clean the display

housing.

• Disconnect the power plug from AC outlet if the product is not being used

for a long period of time.

Don't:

• Block the slots and openings on the unit provided for ventilation.

• Use abrasive cleaners, waxes or solvents to clean the unit.

• Use under the following conditions:

• In extremely hot, cold or humid environments.

• In areas susceptible to excessive dust and dirt.

• Near any appliance that generates a strong magnetic field.

• Place In direct sunlight.

Precautions

Follow all warnings, precautions and maintenance as recommended in this user's guide to maximize the life of your unit.

Warning:

• Do not look into the projector's lens when the lamp is on. The bright light may hurt

your eyes.

• To reduce the risk of fire or electric shock, do not expose this product to rain or

moisture.

• Please do not open or disassemble the product as this may cause electric shock.

• When changing the lamp, please allow unit to cool down, and follow all changing

instructions.

• This product will detect the life of the lamp itself. Please be sure to change the lamp

when it shows warning messages.

• Reset the "Lamp Hour Reset" function from the Onscreen display "Management"

menu after replacing the lamp module.

• When switching the projector off, please ensure the projector completes its cooling

cycle before disconnecting power.

• Turn on the projector first and then the signal sources.

• Do not use lens cap when projector is in operation.

• When the lamp reaches the end of its life, it will burn out and may make a loud

popping sound. If this happens, the projector will not turn back on until the lamp module has been replaced. To replace the lamp, follow the procedures listed under "Replacing the Lamp".

Page 9

Information for your safety and comfort iii

First thing first viii

Usage notes viii

Precautions viii

Introduction 1

Product Features 1

Package Overview 2

Projector Overview 3

Projector Outlook 3

Control Panel 6

Remote Control Layout (P1100/P1200/P1203/ P1206/P1303W) 7

Remote Control Layout (P1100A/P1100C/P1200A/ P1200B/P1200C/P1200i/P1200n/P1300WB) 9

Getting Started 11

Connecting the Projector (P1100/P1200/P1203/ P1206/P1303W) 11

Connecting the Projector (P1100A/P1100C/P1200A/ P1200B/P1200C/P1200i/P1200n/P1300WB) 12

Turning the Projector On/Off 14

Turning on the Projector 14

Turning the projector off 15

Adjusting the Projected Image 16

Adjusting the Height of Projected Image 16

How to optimize image size and distance 17

How to get a preferred image size by adjusting distance and zoom 21

User Controls 25

Installation menu 25

Acer Empowering Technology 26

Onscreen Display (OSD) Menus 28

Color 29

Image 30

Management 33

Page 10

Setting 34

Audio 37

Timer 38

Language 38

Acer LAN webpage management 39

How to login in 39

Home 40

Control Panel 40

Network Setting 41

Alert Setting 41

Logout 42

Appendices 43

Troubleshooting 43

LED & Alarm Definition Listing 48

Replacing and cleaning the dust filters 49

Replacing the Lamp 50

Ceiling Mount Installation 51

Specifications 54

Compatibility modes 57

Regulations and safety notices 61

Page 11

Introduction

Product Features

This product is a single-chip DLP® projector. Outstanding features include:

• DLP

• P1100/P1100A/P1100C: Native 800 x 600 SVGA resolution

• Acer ColorBoost technology delivers nature’s true colors for vivid, life-like

• High brightness and contrast ratio

• Versatile display modes (Bright, Presentation, Standard, Video, Education,

• NTSC / PAL / SECAM compatible and HDTV (720p, 1080i, 1080p) supported

• Top-loading lamp design allows easy lamp replacement

• Lower power consumption and economy (ECO) mode extends lamp life

• Acer EcoProjeciton Technology delivers Intelligent power management

• Empowering Key reveals Acer Empowering Technology utilities (Acer

• P1100/P1200/P1200B/P1200i/P1203/P1206/P1300WB/P1303W series:

technology

P1200/P1200A/P1200B/P1200C/P1200n/P1200i/P1203/P1206 series : Native 1024 x 768 XGA resolution P1300WB/P1303W: Native 1280 x 800 WXGA resolution 4:3 / 16:9 aspect ratio supported (P1100/P1100A/P1100C/P1200/P1200A/ P1200B/P1200C/P1200n/P1200i/P1203/P1206) Full/4:3/16:9/L.Box aspect ratio supported (P1300WB/P1303W)

images

User) enable optimum performance in any situation

approach and physical efficiency improvement.

eView, eTimer, ePower, eOpening Management) for easy adjustment of settings

Equipped with HDMI™ connections supporting HDCP

English

• Advanced digital keystone correction optimizes presentations

• Multi-language onscreen display (OSD) menus

• Full-function remote control

• Manual focus projection lens zooms up to 1.1x

• 2x digital zoom and pan function

• Microsoft

compliant

Windows® 2000, XP, Vista®, Windows 7, Macintosh® OS

Page 12

English

Package Overview

This projector comes with all the items shown below. Check to make sure your unit is complete. Contact your dealer immediately if any thing is missing.

Projector with lens cap Power cord VGA cable

Security card 2 x Batteries Carrying case

Acer Projector

Quick Start Guide

(#A) (#B)

3J8S

3J'Q

2 x Quick Start Guide

(Wireless Quick Start Guide

for P1100A/P1100C/P1200A/

P1200B/P1200C/P1200i/

P1300WB)

1 x Wireless antenna

(P1200i)

2 x User's Guide (Wireless CD

for P1100A/P1100C/P1200A/

P1200B/P1200C/P1200i/

P1300WB)

Dust Filters (Option)

Remote control

(#A for P1100/P1200/P1203/

P1206/P1303W)

(#B for P1100A/P1100C/

P1200A/P1200B/P1200C/

P1200n/P1200i/P1300WB)

Page 13

Projector Overview

Projector Outlook

Front / upper side

# Description # Description

1 Control panel 6 Zoom lever

2 Ventilation (inlet) 7 Remote control receiver

3 Ventilation (outlet) 8 Focus ring

4 Elevator button 9 Zoom lens

5 Elevator foot 10 Lens cap

Rear side (P1100/P1200/P1203/P1206/P1303W Series)

P1100/P1200/ P1203/P1206/ P1303W

24578

9 11*

English

P1203/P1303W/ P1206

P1100/P1200

110

12* 13*

Page 14

English

# Description # Description

1 Power socket 8 Audio input connector

2 USB connector 9 RS232 connector

3 HDMI connector 10

4 Monitor loop-through output connector

(VGA-Out)

5 PC analog signal/HDTV/component video

input connector (VGA IN/VGA IN 1)

6 Composite video input connector

7 S-Video input connector

Kensington

Below items are for P1203/P1206/P1303W only:

12V DC output connector

PC analog signal/HDTV/component

video input connector (VGA IN 2)

Audio output connector

lock port

Rear side (P1100A/P1100C/P1200A/P1200B/P1200C/P1200n/ P1200i/P1300WB series)

P1100A/P1200A/ P1200B/P1200C/ P1100C/P1200i/ P1200n/P1300WB

15 3 4 5 6 7 81

P1100A/P1200A

P1200n

P1200i

P1200B/P1300WB

P1100C/P1200C

18 12 1714

16 1021913 11 9

Page 15

# Description # Description

1 USB connector Below items are for P1200n only:

2 Power socket 10 LAN (RJ45 Port for 10/100M Ethernet)

3 S-Video input connector 11 Audio output connector

4 Composite video input connector 19 PC analog signal/HDTV/component

5 Monitor loop-through output connector

(VGA-Out)

6 PC analog signal/HDTV/component video

input connector

7 Audio input connector 12 USB connector (mini B Type)

8 RS232 connector 13 Reset button

Kensington

Below items are for P1100A/P1200A only: 15 HDMI connector

10 LAN (RJ45 Port for 10/100M Ethernet) 16 USB connector (A1 Type)

11 Audio output connector 17 USB connector (A2 Type)

12 USB connector (mini B Type) 18 Antenna

13 Reset button Below items are for P1200B/P1300WB only:

14 Power LED for wireless 10 LAN (RJ45 Port for 10/100M Ethernet)

19 PC analog signal/HDTV/component video

input connector (VGA IN 2)

Below items are for P1100C/P1200C only: 13 Reset button

11 Audio output connector 14 Power LED for wireless

12 USB connector (mini B Type) 15 HDMI connector

13 Reset button 16 USB connector (A1 Type)

14 Power LED for wireless 17 USB connector (A2 Type)

16 USB connector (A1 Type)

17 USB connector (A2 Type)

19 PC analog signal/HDTV/component video

input connector (VGA IN 2)

lock port

video input connector (VGA IN 2)

Below items are for P1200i only:

10 LAN (RJ45 Port for 10/100M Ethernet)

14 Power LED for wireless

12 USB connector (mini B Type)

English

Page 16

Control Panel

English

# Icon Function Description 1 LAMP Lamp Indicator LED 2 Keystone Adjusts the image to compensate for

distortion caused by tilting the projector (± 40 degrees).

3 RESYNC Automatically synchronizes the projector

4MENU

5 POWER See the contents in "Turning the Projector

6 TEMP Temp Indicator LED 7 Four directional select

keys

8 SOURCE Changes the active source. 9 Empowering key

to the input source.

• Press "MENU" to launch the Onscreen

display (OSD) menu, back to the previous step for the OSD menu operation or exit the OSD menu.

• Confirm your selection of items.

On/Off" section.

Use to select items or make adjustments to your selection.

Unique Acer functions: eOpening, eView, eTimer, ePower Management.

Page 17

Remote Control Layout (P1100/P1200/P1203/P1206/ P1303W)

15 16 19 20 23

# Icon Function Description

1 Infrared

(#)

4 HIDE Momentarily turns off the video. Press "HIDE" to hide the

5 RESYNC Automatically synchronizes the projector to the input source.

6 SOURCE Changes the active source.

7 POWER Refer to the "Turning the Projector On/Off" section.

transmitter

Laser pointer Aim the remote at the viewing screen.

FREEZE To pause the screen image.

Sends signals to the projector.

image, press again to display the image.

3 4

5 6

14 17

18 21 22

English

8 ASPECT RATIO To choose the desired aspect ratio (Auto/4:3/16:9).

9 ZOOM Zooms the projector display in or out.

(#)

11 Empowering

12 KEYSTONE Adjusts the image to compensate for distortion caused by

Laser button Aim the remote at the viewing screen, press and hold this

key

Auto/Full/4:3/16:9/L.Box (P1303W)

button to activate the laser pointer. This function is not supported in Japanese market.

Unique Acer functions: eOpening, eView, eTimer, ePower Management.

tilting the projector (± 40 degrees).

Page 18

English

# Icon Function Description

12 Four

13 MENU

directional select keys

Use up, down, left, right buttons to select items or make adjustments to your selection.

• Press "MENU" to launch the Onscreen display (OSD)

menu, back to the previous step for the OSD menu operation or exit the OSD menu.

• Confirm your selection of items.

14 PgUp/PgDn For computer mode only. Use this button to select the next or

15 RGB Press "RGB" for true-color optimization.

16 BRIGHTNESS Press "BRIGHTNESS" to adjust the brightness of the image.

17 CONTRAST Use the "CONTRAST" option to control the difference

18 COLOR Press "COLOR" to adjust the color temperature of image.

19 VGA Press "VGA" to change source to the VGA connector. This

20 COMPONENT No function.

21 S-VIDEO To change source to S-Video.

22 VIDEO To change source to COMPOSITE VIDEO.

23 DVI No function.

24 HDMI™ To change source to HDMI™. (for the model if with HDMI™

26 WIRELESS No function.

27 KeyPad 0~9 Press "0~9" to input a password in the "Security settings".

MUTE To turn on/off the volume.

previous page. This function is only available when USB Ctrl connector(USB type B) is connected to a computer via a USB cable.

between the lightest and darkest parts of the picture.

connector supports analog RGB, YPbPr (480p/576p/720p/ 1080i), YCbCr (480i/576i) and RGBsync.

connector)

Note:

Page 19

Remote Control Layout (P1100A/P1100C/P1200A/ P1200B/P1200C/P1200i/P1200n/P1300WB)

15 16 19 20 23

# Icon Function Description

1 Infrared

(#)

2 3

4 HIDE Momentarily turns off the video. Press "HIDE" to hide the

5 RESYNC Automatically synchronizes the projector to the input source. 6 SOURCE Press "SOURCE" to choose from RGB, Component, S-Video,

7 POWER Refer to the "Turning the Projector On/Off" section.

transmitter

Laser pointer Aim the remote at the viewing screen.

FREEZE To pause the screen image.

Sends signals to the projector.

image, press again to display the image.

Composite, SCART, HDTV and HDMI™ sources.

5 6

17 18

English

8 ASPECT RATIO To choose the desired aspect ratio (Auto/4:3/16:9) 9 ZOOM Zooms the projector display in or out.

(#)

11 Empowering key Unique Acer functions: eOpening, eView, eTimer, ePower

12 KEYSTONE Adjusts the image to compensate for distortion caused by

Laser button Aim the remote at the viewing screen, press and hold this

button to activate the laser pointer. This function is not supported in Japanese market.

Management.

tilting the projector (± 40 degrees).

Page 20

English

# Icon Function Description

13 MENU

• Press "MENU" to launch the Onscreen display (OSD)

menu, back to the previous step for the OSD menu operation or exit the OSD menu.

• Confirm your selection of items.

14 PAGE For computer mode only. Use this button to select the next or

15 Pre./Rewind Press "Pre./Rewind" to go to previous index or press

16 Enter/Play/Pause Press "Enter/Play/Pause" to play/pause media file.

17 Next/Fast-

forward

18 Back/Stop Press "Back/Stop" to stop playing media file or go back to

previous page. This function is only available when connected to a computer via a USB cable.

continuously to rewind the playing media file.

Press "Next/Fast-forward" once to go to next index or press continuously to fast-forward the playing media file.

upper data folder.

19 VGA Press "VGA" to change source to the VGA connector. This

20 COMPONENT No COMPONENT function. 21 S-VIDEO Press "S-VIDEO" to change source to S-Video. 22 VIDEO Press "VIDEO" to change source to composite video. 23 SD/USB A Press "SD/USB A" to toggle between SD and USB A sources.

(*)

24 25 USB B Press "USB B" to change source to USB mini B.

26 27 KeyPad 0~9 Press "0~9" to input a password in the "Security". 28 Four directional

HDMI™/DVI Press "HDMI™/DVI" to change source to HDMI™.

LAN/WiFi Press "LAN/WiFi" to change source to LAN/WiFi.

select keys

connector supports analog RGB, YPbPr (480p/576p/720p/ 1080i), YCbCr (480i/576i) and RGBsync.

This projector supports various file formats of photo/audio/ video.

Use up, down, left, right buttons to select items or make adjustments to your selection.

Note: "#"Japan area is not supported.

"*" No DVI function

Page 21

Getting Started

Connecting the Projector (P1100/P1200/ P1203/P1206/P1303W)

DVD player,

Monitor

DVD player

RBG

Set-up Box, HDTV receiver

VGA

D-Sub

HDTV adapter

D-Sub

HDMI

USB

HDMI

Video Output

S-Video Output

VGA

RS232

English

RS232

Audio Output

# Description # Description

1 Power cord 7 Composite video cable

2 USB cable 8 S-Video cable

3 HDMI cable 9 Audio cable jack/jack

4 VGA cable 10 RS232 cable

5 VGA to component/HDTV adapter 11 Audio cable jack/RCA

6 3 RCA component cable 12 12V DC cable

Screen

Page 22

English

Connecting the Projector (P1100A/P1100C/ P1200A/P1200B/P1200C/P1200i/P1200n/

P1300WB)

S-Video Output

DVD player

USB

Video Output

HDMI

USB

HDMI

D-Sub

RBG

HDTV adapter

D-Sub

VGA

DVD player, Set-up Box, HDTV receiver

RBG

VGA

RS232

USB

Keyboard

USB

Audio Output

Internet

# Description # Description

1 Power cord 8 RS232 cable

2 USB cable 9 Audio cable jack/jack

3 HDMI cable 10 3 RCA component cable

4 S-Video cable 11 Audio cable Jack/RCA

5 Composite video cable 12 LAN Cable

(*)

6 VGA cable

USB disk/stick

7 VGA to component/HDTV adapter 14 USB cable (Type A to mini USB)

Note: To ensure the projector works well with your computer, please make sure the timing of the display mode is compatible

Page 23

with the projector. Note: "*" USB drive limitation, do not support power consumption over 500mA. Please have external power for USB device.

English

Page 24

Turning the Projector On/Off

English

Turning on the Projector

1 Remove the lens cap. (Illustration #1)

2 Ensure that the power cord and signal cable are securely connected. The

Power indicator LED will flash red.

3 Turn on the projector by pressing "Power" button on the control panel,

and the Power indicator LED will turn blue. (Illustration #2)

4 Turn on your source (computer, notebook, video player ,etc.). The

projector will detect your source automatically.

• If the screen displays "Lock" and "Source" icons, it means the projector is locked onto a specific source type and there is no such type of input signal detected.

• If the screen displays "No Signal", please make sure the signal cables are securely connected.

• If you connect to multiple sources at the same time, use the "Source" button on either control panel or the remote control or direct source key on the remote control to switch between inputs.

Power button

Lens cap

Page 25

Turning the projector off

1 To turn the projector off, press the power button. This message appears:

"Please press the power button again to complete the shutdown process." Press the power button again.

2 The LED power indicator will turn RED and blink rapidly after the projector

is turned off, and the fan(s) will continue to operate for about 2 minutes to ensure that the system cools properly.

3 As long as the power cord remains plugged in, you can press the power

button to turn the projector immediately back on anytime during the 2minute shutdown process.

4 Once the system has finished cooling, the LED power indicator will stop

blinking and turn solid red to indicate standby mode.

5 It is now safe to unplug the power cord.

Warning indicators:

• "Projector Overheated. Lamp will automatically turn off soon." This onscreen message indicates that the projector has overheated. The lamp with automatically turn off, the projector will automatically shut down, and the LED temp indicator will turn solid red. Contact your local dealer or service center.

• "Fan failed. Lamp will automatically turn off soon." This onscreen message indicates that the fan has failed. The lamp will automatically turn off, the projector will automatically shut down, and the LED temp indicator will blink. Contact your local dealer or service center.

English

Note: Whenever the projector automatically shuts down and the LED lamp indicator turns solid red, contact your local reseller or service center.

Page 26

Adjusting the Projected Image

English

Adjusting the Height of Projected Image

The projector is equipped with elevator feet for adjusting the height of image.

To raise the image:

1 Press the elevator foot release. (Illustration #1)

2 Raise the image to the desired height angle (Illustration #2), then release

the button to lock the elevator foot into position.

3 Use Tilt adjusting wheel (Illustration #3) to fine-tune the display angle.

To lower the image:

1 Press the elevator foot release. (Illustration #1)

2 Lower the image to the desired height angle (Illustration #2) , then release

the button to lock the elevator foot into position.

3 Use Tilt adjusting wheel (Illustration #3) to fine-tune the display angle.

Tilt adjusting wheel

Elevator foot release button

Elevator foot

Page 27

Min screen size 69"

How to optimize image size and distance

Consult the table below to find the optimal image sizes achievable when the projector is positioned at a desired distance from the screen.

• P1100/P1100A/P1100C/P1200/P1200A/P1200B/P1200C/P1200n/P1200i/P1203/ P1206 series Example: If the projector is 3 m from the screen, good image quality is possible for image sizes between 69" and 76".

P1100/P1100A/P1100C/P1200/P1200A/P1200B/P1200C/P1200n/ P1200i/P1203/P1206 series

Note: Remind as below figure, the space of 133 cm height is required when located at 3m distance.

Max screen size

76"

English

Height: 133cm Form base to

top of image Height: 120cm

3m Desired Distance

Figure: Fixed distance with different zoom and screen size.

Page 28

P1100/P1100A/P1100C/P1200/P1200A/P1200B/P1200C/P1200n/ P1200i/P1203/P1206 series

English

Screen size

Desired

Distance

(m)

Diagonal

<A>

Zoom Ratio: 1.1x

(inch)

1.5 34 70 x 52 60 38 77 x 58 66

2 46 93 x 70 80 50 103 x 77 88

2.5 57 116 x 87 100 63 128 x 96 111

3 69 140 x 105 120 76 154 x 115 133

3.5 80 163 x 122 140 88 179 x 135 155

4 92 186 x 140 160 101 205 x 154 177

4.5 103 209 x 157 181 114 231 x 173 199

5 114 233 x 174 201 126 256 x 192 221

6 137 279 x 209 241 151 308 x 231 265

7 160 326 x 244 281 177 359 x 269 310

8 183 372 x 279 321 202 410 x 308 354

9 206 419 x 314 361 227 462 x 346 398

10 229 465 x 349 401 252 513 x 385 442

11 252 512 x 384 441 278 564 x 423 487

12 275 558 x 419 481 303 615 x 462 531

(Min zoom) (Max zoom)

W (cm) x H (cm)

Top

From base

to top of

image (cm)

<C>

Diagonal

(inch)

Screen size

W (cm) x H (cm)

Top

From base to top of image

(cm)

<C>

Page 29

82"

• P1300WB/P1303W series Example: If the projector is 3 m from the screen, good image quality is possible for image sizes between 82" and 90".

P1300WB/P1303W series

Note: Remind as below figure, the space of 135 cm height is required when located at 3m distance.

Max screen size

Min screen size

90"

82"

Height: 135cm Form base to top of image

Height 124cm

3m Desired Distance

English

Figure: Fixed distance with different zoom and screen size.

Page 30

P1300WB/P1303W series

English

Screen size

Desired

Distance

(m)

Diagonal

<A>

Zoom Ratio: 1.1x

(inch)

1.5 41 88 x 55 62 45 97 x 60 68

2 55 118 x 74 82 60 129 x 81 90

2.5 68 147 x 92 103 75 161 x 101 113

3 82 176 x 110 124 90 194 x 121 135

3.5 96 206 x 129 144 105 226 x 141 158

4 109 235 x 147 165 120 258 x 161 181

4.5 123 265 x 165 185 135 290 x 181 203

5 137 294 x 184 206 150 323 x 202 226

6 164 353 x 221 247 180 387 x 242 271

7 191 412 x 257 288 210 452 x 282 316

8 218 471 x 294 329 240 516 x 323 361

9 246 529 x 331 371 270 581 x 363 406

10 273 588 x 368 412 300 645 x 403 452

(Min zoom) (Max zoom)

W (cm) x H (cm)

Top

From base

to top of

image (cm)

<C>

Diagonal

(inch)

Screen size

W (cm) x H (cm)

Top

From base to top of image

(cm)

<C>

Page 31

How to get a preferred image size by adjusting distance and zoom

P1100/P1100A/P1100C/P1200/P1200A/P1200B/P1200C/P1200n/ P1200i/P1203/P1206 series

50"

Desired image size

Height

Form base to top of image

2 m

2.2 m

Desired Distance

English

The table below shows how to achieve a desired image size by adjusting either the position or the zoom ring. For example: to obtain an image size of 50" set the projector at a distance 2 m and 2.2 m from the screen and adjust the zoom level accordingly.

Page 32

P1100/P1100A/P1100C/P1200/P1200A/P1200B/P1200C/P1200n/ P1200i/P1203/P1206 series

English

Desired Image Size Distance (m) Top (cm)

Diagonal (inch)

<A>

30 61 x 46 1.2 1.3 53

40 81 x 61 1.6 1.7 70

50 102 x 76 2.0 2.2 88

60 122 x 91 2.4 2.6 105

70 142 x 107 2.8 3.1 123

80 163 x 122 3.2 3.5 140

90 183 x 137 3.6 3.9 158

100 203 x 152 4.0 4.4 175

120 244 x 183 4.8 5.2 210

150 305 x 229 5.9 6.6 263

180 366 x 274 7.1 7.9 315

200 406 x 305 7.9 8.7 351

250 508 x 381 9.9 10.9 438

300 610 x 457 11.9 526

Zoom Ratio: 1.1x

W (cm) x H (cm)

Max zoom

Min zoom

<C>

From base to top of

image

<D>

Page 33

P1300WB/P1303W series

50"

Desired image size

Height

Form base to top of image

1.7m

1.8m

The table below shows how to achieve a desired image size by adjusting either the position or the zoom ring. For example: to obtain an image size of 50" set the projector at a distance 1.7 m and 1.8 m from the screen and adjust the zoom level accordingly.

Desired Distance

English

Page 34

P1300WB/P1303W series

English

Desired Image Size Distance (m) Top (cm)

Diagonal (inch)

<A>

30 65 x 40 1.0 1.1 45

40 86 x 54 1.3 1.5 60

50 108 x 67 1.7 1.8 76

60 129 x 81 2.0 2.2 91

70 151 x 94 2.3 2.6 106

80 172 x 108 2.7 2.9 121

90 194 x 121 3.0 3.3 136

100 215 x 135 3.3 3.7 151

120 258 x 162 4.0 4.4 181

150 323 x 202 5.0 5.5 226

180 388 x 242 6.0 6.6 271

200 431 x 269 6.7 7.3 302

250 538 x 337 8.3 9.2 377

300 646 x 404 10.0 452

Zoom Ratio: 1.1x

W (cm) x H (cm)

Max zoom

Min zoom

<C>

From base to top of

image

<D>

Page 35

User Controls

Installation menu

The installation menu provides an onscreen display (OSD) for projector installation and maintenance. Use the OSD only when the message "No signal input" is displayed on the screen.

The menu options include settings and adjustments for screen size and distance, focus, keystone correction and more .

1 Turn on the projector by pressing "Power" button on the control pad.

2 Press the menu button on the control pad to launch the OSD for projector

installation and maintenance.

3 The background pattern acts as a guide to adjusting the calibration and

alignment settings, such as screen size and distance, focus and more .

4 The Installation menu includes the following options:

English

• Projection method

• Menu location

• Keystone settings

• Language settings

• Reset to factory default function

Use the up and down arrow keys to select an option, the left and right arrow keys to adjust selected option settings, and the right arrow key to enter a submenu for feature setting. The new settings will be saved automatically upon exiting the menu.

5 Push the menu button anytime to exit the menu and return to the Acer

welcome screen.

Page 36

Acer Empowering Technology

English

Empowering Key

Acer eView Management

Acer eTimer Management

Acer Empowering Key provides four Acer unique functions, they are "Acer eView Management", "Acer eTimer Management" and "Acer eOpening Management" and "Acer ePower

Management" respectively. Press " " key for more than one second to launch the Onscreen display main menu to modify its function.

Press " " to launch "Acer eView Management" submenu.

"Acer eView Management" is for display mode selection. Please refer to Onscreen Display Menus section for more detail.

Press " " to launch "Acer eTimer Management" submenu. "Acer eTimer Management" provides the reminding function for presentation time control. Please refer to Onscreen Display Menus section for more detail.

Acer eOpening Management

Press " " to launch "Acer eOpening Management". "Acer eOpening Management" allows user to change the Startup screen to their personalized image. Please refer to Onscreen Display section for more detail.

Page 37

Acer ePower Management

Press " " to launch "Acer ePower Management". "Acer ePower Management" provides user one shortcut to save lamp and projector life. Please refer to Onscreen Display section for more detail.

English

Page 38

Onscreen Display (OSD) Menus

English

The projector has multilingual OSD that allow you to make image adjustments and change a variety of settings.

Using the OSD menus

• To open the OSD menu, press "MENU" on the remote control or control

panel.

• When the OSD is displayed, use the keys to select any item in the

main menu. After selecting the desired main menu item, press to enter submenu for feature setting.

• Use the keys to select the desired item and adjust the settings by

using the keys.

• Select the next item to be adjusted in the submenu and adjust as described

above.

• Press "MENU" on the remote control or control panel, the screen will

return to the main menu.

• To exit OSD, press "MENU" on the remote control or control panel again.

The OSD menu will close and the projector will automatically save the new settings.

Main menu

Sub menu

Setting

Page 39

Color

Display Mode

Wall color

Brightness

Contrast

Color Temperature

Degamma

Color R Color G Color B Saturation

There are many factory presets optimized for various types of images.

• Bright: For brightness optimization.

• Presentation: For meeting presentation with higher

brightness.

• Standard: For common environment.

• Video: For playing video in a bright environment.

• Education: For education environment.

• User: Memorize user’s settings.

Use this function to choose a proper color according to the wall. There are several choices, including white, light yellow, light blue, pink, dark green. It will compensate the color deviation due to the wall color to show the correct image tone.

Adjust the brightness of the image.

• Press to darken image.

• Press to lighten the image.

"Contrast" controls the difference between the lightest and darkest parts of the picture. Adjusting the contrast changes the amount of black and white in the image.

• Press to decrease the contrast.

• Press to increase the contrast.

Adjust the color temperature. At higher color temperatures, the screen looks colder; at lower color temperatures, the screen looks warmer.

Effects the representation of dark scenery. With greater gamma value, dark scenery will look brighter.

Adjusts the red color.

Adjusts the green color.

Adjusts the blue color.

Adjusts a video image from black and white to fully saturated color.

• Press to decrease the amount of color in the image.

• Press to increase the amount of color in the image.

English

Page 40

English

Tint

Note: "Saturation" and "Tint" functions are not supported under computer mode or HDMI (RGB) mode.

Image

Projection mode

Projection Location

Adjusts the color balance of red and green.

• Press to increase the amount of green in the image.

• Press to increase the amount of red in the image.

• Front: The factory default setting.

• Rear: Reverses the image so you can project from behind a

translucent screen.

• Auto: Automatically adjusts projection location of image.

• Desktop

• Ceiling: Turns the image upside down for ceiling-mounted

projection.

Page 41

English

Aspect Ratio

Use this function to choose your desired aspect ratio.

• Auto: Keep the image with original width-higth ratio and maxi

• Full: Resize image to fit full screen by width (1280 pixels) and

mize the image to fit native horizontal or vertical pixels.

• 4:3: The image will be scaled to fit the screen and displayed using

height (800 pixels).

• 16:9: The image will be scaled to fit the width of the screen and

a 4:3 ratio.

• L.Box: Keep original signal aspect ratio and zoom in by 1.333

the height adjusted to display the image using a 16:9 ratio.

<Note> "Full" and "L.Box" funcions are supported in P1300WB/

Auto Keystone Automatically adjusts vertical image.

Manual Keystone Adjust image distortion caused by tilting projection. (±40 degrees)

<Note> The Manual Keystone funcion is unavailable under Auto Keystone setting to "On".

H. Position (Horizontal position)

V. Position (Vertical position)

Frequency "Frequency" changes the projector's refresh rate to match the

Tracking Synchronizes the signal timing of the projector with the graphics card.

Sharpeness Adjusts the sharpness of the image.

• Press to move the image left.

• Press to to move the image right.

• Press to move the image down.

• Press to move the image up.

frequency of your computer’s graphics card. If you can see a vertical flickering bar in the projected image, use this function to make the necessary adjustments.

If you experience an unstable or flickering image, use this function to correct it.

times.

P1303W.

• Press to decrease the sharpness.

• Press to increase the sharpness.

3D Choose "On" to enable DLP 3D function.

• On: Choose this item while using DLP 3D glasses, quad buffer

(NVIDIA/ATI…) graphic card and HQFS format file or DVD with corresponding SW player.

• Off: Turn off 3D mode.

3D Sync L/R If you see a discrete or overlapping image while wearing DLP 3D

glasses, you may need to execute "Invert" to get best match of left/ right image sequence to get the correct image (for DLP 3D).

Page 42

English

Note: "H. Position", "V. Position", "Frequency" and "Tracking" functions are not supported under HDMI or Video mode. Note: "Sharpness" functions is not supported under HDMI (RGB) and Computer mode. Note: 3D function is supported by VGA source only. Please see timing table for detail 3D timings. Note: It needs correct settings on graphic card 3D application program for correct 3D display. Note: The SW players, such as Stereoscopic Player and DDD TriDef Media Player can support 3D format files. You can download these three players on web page below,

- NVIDIA Stereoscopic 3D Video Player: http://www.nvidia.com/object/3D_Drivers_Downloads.html

- Stereoscopic Player (Trial): http://www.3dtv.at/Downloads/Index_en.aspx

- DDD TriDef Media Player (Trial): http://www.tridef.com/download/TriDef-3-D-Experience-4.0.2.html

Note: "3D Sync L/R" is only available when DLP 3D is enabled. Note: There has reminder screen if 3D still enable when power on projector. Please adjust setting depended on your purpose.

Page 43

Management

ECO Mode Choose "On" to dim the projector lamp which will lower power

High Altitude Choose "On" to turn on High Altitude mode. Operate the fans at

Auto Shutdown The projector will automatically shutdown when there is no signal

Lamp Hour Elapse Displays the lamp’s elapsed operating time (in hours).

Lamp Reminding Activate this function to display a reminder to change the lamp 30

Lamp Hour Reset

consumption, extend the lamp life and reduce noise. Choose "Off" to return normal mode.

full speed continuously to allow for proper high altitude cooling of the projector.

input after the allocated time. (in minutes)

hours before its expected end-of-life.

Press the button and choose "Yes" to turn the lamp hour counter to 0 hours.

English

Page 44

English

Setting

P1200n/P1100A/P1200A/P1200B/P1200C/P1300WB P1200i

P1100/P1100C/P1200/P1200C

Menu Location Choose the menu location on the display screen.

Source Lock When source lock is turned "off", the projector will search for

Startup Screen Use this function to select your desired startup screen. If you

other signals if the current input signal is lost. When source lock is turned "on", it will "lock" the current source channel unless you press "Source" button on the remote control for the next channel.

change the setting, the changes will take effect when you exit the OSD menu.

• Acer: The default startup screen of your Acer projector.

• User: Use memorize picture from "Screen Capture" function.

P1203/P1303W/P1206

Page 45

Screen Capture Use this function to customize the startup screen. To capture the

Closed Caption Selects a preferred closed captioning mode from CC1, CC2, CC3,

Security Security

image that you want to use as the startup screen, follow the instructions below. Notice: Before proceeding with the following steps, make sure that the "Keystone" is set to the default value 0 and the aspect ratio is set to 4:3. For details, refer to the "Image" section.

• Change the "Startup Screen" from the default setting "Acer" to "User".

• Press "Screen Capture" to customize the startup screen.

• A dialog box appears to confirm the action. Choose "Yes" to use the current image as your customized startup screen. The capture range is the red rectangular area. Choose "No" to cancel the screen capture and exit the onscreen display (OSD).

• A message appears, stating that the screen capture is in progress.

• When the screen capture is finished, the message disappears and the original display is shown.

• The customized startup screen, as shown below, takes effect when there is a new input signal or when you restart the projector.

CC4, (CC1 displays captions in the primary language in your area). Select "Off" to turn off the captioning feature. This function is only available when a composite video or S-Video input signal is selected and its system format is NTSC. <Note> Set your screen aspect ratio to 4:3. This function is not available when the aspect ratio is "16:9" or "Auto".

This projector provides a useful security function for the administrator to manage usage of the projector .

Press to change the "Security" setting. If the security function is enabled, your must enter the "Administrator Password" first

before changing the security settings.

• Select "On" to enable the security function. The user has to

enter a password to operate the projector. Please refer to the "User Password" section for details.

• If "Off" is selected, then the user can turn on the projector

without password.

English

Note: This screen capture function is limited by 4:3 aspect ratio only. Note: For XGA models, to get best quality for you desired image, suggest end-user set PC resolution to 1024 x 768 before you use this function. Note: For SVGA models, to get best quality for you desired image, suggest end-user set PC resolution to 800 x 600 before you use this function. Note: For WXGA models, to get best quality for you desired image, suggest end-user set PC resolution to 1280 x 800 before you use this function.

Page 46

English

Timeout(Min.) Once "Security" is activated to "On", the administrator can set

timeout function.

• Press or to select the timeout interval.

• The range is from 10 minute to 990 minutes.

• When the time is up, the projector will prompt the user to

enter the password again.

• The factory default setting of "Timeout(Min.)" is "Off".

• Once the security function is enabled, the projector will

request user to enter password when switch on the projector . Both "User Password" and "Administrator Password" can be accepted for this dialogue.

User password

• Press to setup or change the "User Password".

• Press number keys to set your password on the remote control

and press "MENU" to confirm.

• Press to delete character.

• Enter the password when you see "Confirm Password"

displayed.

• The password should be between 4 and 8 characters long.

• If you select "Request password only after plugging power

cord", the projector will prompt the user to enter the password every time the power cord is plugged.

• If you select "Always request password while projector turns

on", the user has to enter the password every time when the projector is turned on.

Administrator Password

The "Administrator Password" can be used in both the "Enter Administrator Password" and "Enter Password" dialog boxes.

• Press to change the "Administrator Password".

• The factory default of "Administrator Password" is "1234".

If you forgot your administrator password, do the following to retrieve the administrator password:

• An unique 6-digit "Universal Password" which is printed on

the Security Card (please check accessory in the box). This unique password is the number which will be accepted by projector anytime no matter what the Administrator Password is.

• If losing this security card and number, please contact with an

Acer service center.

Lock User Startup Screen

• Default Lock User Startup Screen is "OFF". If lock user startup

screen is "ON", users cannot change startup screen anymore and avoid other users change that arbitrarily. Choose "OFF" to unlock startup screen.

VGA OUT (Standby) Default is "Off". Choose "On" to enable VGA OUT connection.

Page 47

Reset

LAN

LAN IP/Mask

LAN Reset

WiFi/LAN

WiFi/LAN Reset

Auto Screen

Audio

Volume

Mute

Power On/Off Volume

Alarm Volume

• Press the button and choose "Yes" to return the

parameters on all menus to the factory default settings.

• Default is "Off". Choose "On" to enable LAN connection. (for

P1100A/P1200A/P1200B/P1200C/P1200n/P1300WB only)

• Identify IP and Mask address. (for P1100A/P1200A/P1200B/

P1200C/P1200i/P1200n/P1300WB only)

• Reset LAN function. (for P1100A/P1200A/P1200B/P1200C/

P1200n/P1300WB only)

• Default is "On". Choose "Off" to disable Wireless / LAN

connection. (for P1200i only)

• Reset LAN or Wireless function. (for P1200i only)

• Default is On, the down/up move of electronic screen will be

related with power on/off of Projector

• Press to decrease the volume.

• Press to increase the volume.

• Choose "On" to mute the volume.

• Choose "Off" to restore the volume.

• Select this function to adjust the notification volume when

turning the projector on/off.

• Select this function to adjust the volume of any warning

notifications.

English

Page 48

English

Timer

Timer Location

Timer Start

Timer Period

Timer Volume

Timer Display

Language

• Choose the location of the timer on the screen.

• Press to start or stop the timer.

• Press or to adjust the timer period.

• Select this function to adjust the notification volume when

the timer function is enabled and time is up.

• Press or to which timer mode to display on the

screen.

Choose the multilingual OSD menu. Use the or key to select your preferred menu language.

• Press to confirm the selection.

Page 49

Acer LAN webpage management

How to login in

Open browser and enter the Server IP address by 192. 168. 0.100 to find below homepage of acer LAN webpage management. A password is needed to login in before using.

Select a user. Administrator is with high authority that can process more operations such as network setting and alert setting. Default password of administrator is "admin". And User is with normal authority with default password by "user". Click Login button to enter into homepage with correct password.

English

Page 50

English

Home

Home page shows connection status and you can find three main functions listed, Control Panel, Networking Setting and Alert Setting.

Note: Control Panel and Network Setting are only for Administrator account.

Control Panel

Enduser can control and adjust projector setting value via this page.

Page 51

Network Setting

Enduser can set IP address, group name and password as wish. After change network configurations or password, projector will reboot automatically after press "Apply".

Note: Group Name and projector Name must be less then 32 characters.

Alert Setting

Enduser can send mail with error message right away if projector has problem.

English

Page 52

English

Logout

After tap Logout, you will return to login page within 5 seconds.

Page 53

Appendices

Troubleshooting

If you experience a problem with your Acer projector, refer to the following troubleshooting guide. If the problem persists, please contact your local reseller or service center.

Image Problems and Solutions

# Problem Solution

1 No image appears

onscreen

2 Partial, scrolling

or incorrectly displayed image(For PC (Windows 95/98/ 2000/XP))

• Connected as described in the "Getting Started"

section.

• Ensure none of the connector pins are bent or

broken.

• Check if the projector lamp has been securely

installed. Please refer to the "Replacing the Lamp" section.

• Make sure you have removed the lens cap and the

projector is switched on.

•

Press "RESYNC" on the remote control or control panel.

• For an incorrectly displayed image:

• Open "My Computer," open the "Control

Panel," and then double-click the "Display" icon.

• Select the "Settings" tab.

• Verify that your display resolution setting is

lower than or equal to UXGA (1600 x 1200).

• Click the "Advanced Properties" button.

If the problem still appears, change the monitor display you are using and follow the steps below:

• Verify that the resolution setting is lower than

or equal to UXGA (1600 x 1200).

• Click the "Change" button under the

"Monitor" tab.

• Click "Show all devices". Next, select "Standard

monitor types" under the SP box, and choose the resolution mode you need under the "Models" box.

• Verify that the resolution setting of the

monitor display is lower than or equal to UXGA (1600 x 1200).

English

Page 54

English

3 Partial, scrolling

or incorrectly displayed image (For notebooks)

4 The screen of the

notebook computer is not displaying your presentation

5 Image is unstable

or flickering

6 Image has vertical

flickering bar

• Press "RESYNC" on the remote control or control

panel.

• For an incorrectly displayed image:

• Follow the steps for item 2 (above) to adjust

the resolution of your computer.

• Press the toggle output settings. Example:

[Fn]+[F4], Compaq [Fn]+[F4], Dell [Fn]+[F8], Gateway [Fn]+[F4], IBM [Fn]+[F7], HP [Fn]+[F4], NEC [Fn]+[F3], Toshiba [Fn]+[F5 ]

• If you experience difficulty changing resolutions or

your monitor freezes, restart all equipment including the projector.

• If you are using a Microsoft

notebook: Some notebook PCs may deactivate their own screens when a second display device is in use. Each has a different way to be reactivated. Refer to your computer's manual for detailed information.

• If you are using an Apple

notebook: In System Preferences, open Display and select Video Mirroring "On".

Windows® based

Mac® OS based

• Adjust the "Tracking" to correct it. Refer to the

"Image" section for more information.

• Change the display color depth settings on your

computer.

• Use "Frequency" to make an adjustment. Refer to

the "Image" section for more information.

• Check and reconfigure the display mode of your

graphics card to make it compatible with the projector.

7 Image is out of

focus

• Make sure the lens cap is removed.

• Adjusts the focus ring on the projector lens.

• Make sure the projection screen is within the

required distance of 3.9 to 39.4 feet (1.2 to 12.0 meters) from the projector and 3.3 to 39.4 feet (1.0 to 10.0 meters)(P1300WB/P1303W) from the projector. Refer to the "How to Get a Preferred Image Size by Adjusting Distance and Zoom" section for more information.

Page 55

8 Image is stretched

when displaying a "widescreen" DVD title

9 Image is too small

or too large

10 Image has slanted

sides

11 Image is reversed

When you play a DVD encoded in anamorphic or 16:9 aspect ratio you may need to adjust the following settings:

• If you play an Letterbox(LBX) format DVD title,

please change the format to Letterbox(LBX) in the projector OSD.

• If you play a 4:3 format DVD title, please change the

format to 4:3 in the projector OSD.

• If the image is still stretched, you will also need to

adjust the aspect ratio. Set up the display format to 16:9 (wide) aspect ratio on your DVD player.

• Adjust the zoom lever on the top of the projector.

• Move the projector closer to or further from the

screen.

• Press "MENU" on the remote control. Go to "Image -

-> Aspect Ratio" and try different settings or press"Aspect Ratio" on the remote control to adjust directly.

• If possible, reposition the projector so that it is

centered on the screen.

• Press the "Keystone / " button on the remote

control until the sides are vertical.

• Press "MENU" on the remote control. Go to "Image -

-> Auto Keystone" and choose "Off" on the OSD, if "Keystone" button is not available on the remote control.

• Select "Image --> Projection" on the OSD and adjust

the projection direction.

English

Page 56

OSD Messages

English

# Condition Message Reminder

1 Message Fan Fail - the system fan is not working.

Projector Overheated - the projector has exceeded its recommended operating temperature and must be allowed to cool down before it may be used.

Replace the lamp - the lamp is about to reach its maximum lifetime. Prepare to replace it soon.

Page 57

Problems with the Projector

# Condition Solution

1 The projector stops responding

to all controls

2 Lamp burns out or makes a

popping sound

If possible, turn off the projector, then unplug the power cord and wait at least 30 seconds before reconnecting power.

When the lamp reaches the end of its useful life, it will burn out and may make a loud popping sound. If this happens, the projector will not turn on until the lamp module has been replaced. To replace the lamp, follow the procedures in the "Replacing the Lamp" section.

English

Page 58

LED & Alarm Definition Listing

English

LED Messages

Message

Standby (power cord plugged in)

Power button ON -- -- -- V

Lamp retry -- -- -- Quick

Turning off (cooling state)

Turning off (cooling completed)

Error (thermal failure) -- V -- V

Error (fan lock failure) -- Quick

Error (lamp breakdown) V -- -- V

Error (color Wheel fail) Quick

Lamp LED Temp LED Power LED

Red Red Red Blue

-- -- V --

-- -- Quick

-- -- V --

flashing

-- -- V

flashing

-- V

flashing

Page 59

Replacing and cleaning the dust filters

Replacing the dust filters 1 Turn the projector off then unplug the power cord.

2 Pull the both sides dust filters out. (Illustration #1) 3 Clean or replace the dust filter. 4 To put the dust filters back, reverse the previous step. 5 When dust filters are implemented, please set the system to be high

altitude mode. (Settings: Menu->Management->High Altitude->On)

Note: When the dust filters are installed, please make sure the system is at high altitude mode.

(Illustration #1)

Cleaning the dust filters

Clean the dust filters after every 1000 hours of use. If they are not cleaned periodically, they can become clogged with dust, preventing proper ventilation. This can cause overheating and damage the projector. (Normally 1000 hours is recommended, clean period will be depending on actual environment)

Please find following steps for cleaning procdure: 1 To clean the dust filters, use a small vacuum cleaner designed for

computers and other office equipments. It also can be cleaned by water. (Illustration #2)

2 If the dirt is difficult to remove or the filter is broken, please contact your

local dealer or service center to obtain a new filter.

English

Dust Filter

(Illustration #2)

Page 60

English

Replacing the Lamp

Use a screwdriver to remove the screw(s) from the cover, and then pull out the lamp.

The projector will detect the lamp life. You will be shown a warning message "Lamp is approaching the end of its useful life in full power operation. Replacement Suggested!" When you see this message, change the lamp as soon as possible. Make sure the projector has been cooling down for at least 30 minutes before changing the lamp.

Warning: The lamp compartment is hot! Allow it to cool down before changing the lamp.

To Change the Lamp 1 Turn off the projector by pressing the power button. 2 Allow the projector at least 30 mins to cool down. 3 Disconnect the power cord. 4 Remove the two screws on both sides of the projector at the same time.

(Illustration #1) 5 Push and slide the top cover towards the direction of the lens. (Illustration #2) 6 Open the top cover. (Illustration #3) 7 Remove the two screws that secure the lamp module

lamp bar 8 Pull out the lamp module by force. (Illustration #5)

To replace the lamp module, reverse the previous step.

Y.(Illustration #4)

Warning: To reduce the risk of personal injury, do not drop the lamp module or touch the lamp bulb. The bulb may shatter and cause injury if it is dropped.

X and pull up the

Page 61

Ceiling Mount Installation

If you wish to install the projector using a ceiling mount, please refer to the steps below:

1 Drill four holes into a solid, structurally sound part of the ceiling, and

secure the mount base.

49.9

8.4

Note: Screws are not included. Please obtain the appropriate screws for your type of ceiling.

2 Secure the ceiling rod using the appropriate type of four-cylinder screws.

130 mm

English

Short Rod

50 mm length/8 mm diameter -

Screw Type A

Ceiling Mount Base

- Attach to ceiling

Long Rod

Ex tension Rod

Long cyl inder Cap Allen Key

- For tightning/loosening

Tightening Screw

Med ium Ro d

Page 62

English

3 Use the appropriate number of screws for the projector size to attach the

projector to the ceiling mount bracket.

Screw Type B

Smaller Washer

Large Wash er

Supports projector and allows -

for adjustments

Note: It is recommended that you keep a reasonable space between the bracket and the projector to allow for proper heat distribution. Use two washers for extra support, if deemed necessary.

4 Attach the ceiling bracket to the ceiling rod.

Screw Type A

50 mm length -

08 mm diameter

Projecto r Bracket

Spacer

- For heat dissipation

Large cylinder cap

Allen K ey

- For tightening/loosening

Tightening Screw

Page 63

5 Adjust the angle and positioning as necessary.

Tightening Screw

Allen K ey

Tightening Screw

Note: The appropriate type of screw and washer for each model is listed in the table below. 3 mm diameter screws are enclosed in

the screw pack.

Models Screw Type B Washer Type

P1100/P1100A/P1100C/P1200/ P1200A/P1200B/P1200C/P1200n/ P1200i/P1203/P1206/P1300WB/ P1303W

Diameter (mm) Length (mm) Large Small

325VV

English

SCREW SPEC. M3 x 10 mm

160.0 mm

60.0 mm

Page 64

English

Specifications

The specifications listed below are subject to change without notice. For final specs, please refer to Acer's published marketing specifications.

Projection system

Resolution P1100/P1100A/P1100C: Native: SVGA (800 x 600) ,

Computer compatibility IBM PC and compatibles, Apple Macintosh, iMac and

Video compatibility NTSC (3.58/4.43), PAL (B/D/G/H/I/M/N), SECAM (B/D/G/K/

Aspect ratio P1100/P1100A/P1100C/P1200/P1200A/P1200B/P1200C/

Displayable colors 1.07 Billion colors

Projection lens P1100/P1100A/P1100C/P1200/P1200A/P1200B/P1200C/

Projection screen size (diagonal) P1100/P1100A/P1100C/P1200/P1200A/P1200B/P1200C/

Projection distance P1100/P1100A/P1100C/P1200/P1200A/P1200B/P1200C/

Throw ratio P1100/P1100A/P1100C/P1200/P1200A/P1200B/P1200C/

Horizontal scan rate 30k - 100 kHz

Vertical refresh scan rate 50-85 Hz, 120Hz (for 3D mode only)

Lamp type P1100/P1100A/P1100C/P1200/P1200A/P1200B/P1200C/

Keystone correction +/- 40 degrees

Audio Internal speaker with 2 W output

Weight 3 kg (6.6 lbs.)

Dimensions (W x D x H) 269mmx206mmx96mm (10.6"x8.1"x3.8")

DLP

Maximum: UXGA (1600 x 1200), 1080p(1920x1080)

P1200/P1200A/P1200B/P1200C/P1200n/P1200i/P1203/

P1206: Native: XGA (1024 x 768), Maximum: UXGA (1600 x 1200), 1080p(1920x1080)

P1300WB/P1303W series: Native: WXGA (1280 x 800),

Maximum: UXGA (1600 x 1200), 1080p(1920x1080)

VESA standards: SXGA, XGA, VGA, SVGA, SXGA+, WXGA, WXGA+, WSXGA+

K1/L), HDTV (720p, 1080i, 1080p), EDTV (480p, 576p), SDTV (480i, 576i)

P1200n/P1200i/P1203/P1206: 4:3 (native), 16:9 P1300WB/P1303W: Full/4:3/16:9/L.Box

series:

P1200n/P1200i/P1203/P1206

21.79 mm - 23.99 mm, 1.1X manual zoom lens P1300WB/P1303W series: F/ 2.5 - 2.6, f = 21.86 - 24.00

mm, 1.1X manual zoom lens

P1200n/P1200i/P1203/P1206

302.8" (7.69 m) P1300WB/P1303W series: 27" (0.69 m) ~ 300" (7.62 m)

P1200n/P1200i/P1203/P1206 (12.0 m)

P1300WB/P1303W series: 3.3' (1.0m) ~ 39.4' (10.0m)

P1200n/P1200i/P1203/P1206

2.15:1) P1300WB/P1303W series: 60"@2m (1.55 ~ 1.70:1)

P1200n/P1200i/P1300WB: 180 W user-replaceable lamp P1203/P1206/P1303W: 230 W user-replaceable lamp

F/ 2.41 - 2.55, f =

series:

27.46" (0.70 m) -

series:

3.9' (1.2 m) - 39.4'

series:

60"@2m (1.95 -

Page 65

Remote control Laser pointer function (Exclude Japan market)

Digital Zoom 2X

Power supply AC input 100 - 240 V, 50 - 60 Hz

Power consumption P1100/P1100A/P1200/P1200A/P1200B/P1200C/P1200n/

Operating temperature 5ºC to 35ºC / 41ºF to 95ºF

Standard package contents

P1200i/P1300WB: 255 W P1203/P1206/P1303W: 325 W

• AC power cord x1

• VGA cable x1

• Remote control x1

• Batteries x 2 (for remote control)

• User's Guide (CD-ROM) x2 (Wireless CD for

P1100A/P1100C/P1200A/P1200B/P1200C/P1200i/ P1300WB)

• Quick start guide x2 (Wireless Quick Start Guide

for P1100A/P1100C/P1200A/P1200B/P1200C/ P1200i/P1300WB)

• Security card x 1

• Carrying case x1

• Wireless antenna x1 (For P1200i)

I/O connectors

Power socket V V V V V V V

HDMI V V X V X V X

VGA input V x2 x2 V x2 V x2

Composite video V V V V V V V

S-Video V V V V V V V

VGA output V V V V V V V

3.5 mm audio jack input

PS232 V V V V V V V

USB (for remote computer control)

3.5 mm audio jack output

12V DC out for screen control

USB Type-A (for photo viewer)

USB Type-B (for display)

RJ45 LAN input X X V V V V X

Wireless antenna X X X V X X X

P1100/ P1200

VV V VV V V

XV V VX X V

XV X XX X X

XX X x2X x2 x2

XX V VX V V

P1203/ P1206/ P1303W

P1100A/ P1200A

P1200i P1200n

P1200B/ P1300WB

P1100C/ P1200C

English

Page 66

English

* Design and specifications are subject to change without notice.

Page 67

Compatibility modes

A. VGA Analog

1 VGA Analog - PC Signal

Modes Resolution V.Frequency [Hz] H.Frequency [KHz]

VGA 640x480 60 31.47

640x480 72 37.86 640x480 75 37.50 640x480 85 43.27 640x480 119.51 61.60

SVGA 800x600 56 35.20

800x600 60 37.88 800x600 72 48.08 800x600 75 46.88 800x600 85 53.67 800x600 119.85 77.20

XGA 1024x768 60 48.36

1024x768 70 56.48 1024x768 75 60.02 1024x768 85 68.67 1024x768 119.804 98.80

SXGA 1152x864 70 63.80

1152x864 75 67.50

1152x864 85 77.10 1280X1024 60 63.98 1280X1024 72 77.90 1280X1024 75 79.98 1280X1024 85 91.15

QuadVGA 1280x960 60 60.00

1280x960 75 75.00

SXGA+ 1400x1050 60 65.32

UXGA 1600x1200 60 75.00

Power Mac G4 640x480 60 31.50

640x480 66.6(67) 35.00

800x600 60 37.88 1024x768 60 48.36 1152x870 75 68.68 1280x960 75 75.20

i Mac DV (G3) 1024x768 75 60.30

English

Page 68

English

2 VGA Analog - Extended Wide timing

Modes Resolution V.Frequency [Hz] H.Frequency [KHz] WXGA 1280x768 60 47.78

1280x768 75 60.29 1280x768 85 68.63 1280x720 60 44.80 1280x800 60 49.60 1440x900 60 55.90

1680x1050 60 65.30

1366x768 60 47.71

1920x1080-RB 60 66.60

1920x1080-EIA 60 66.60

1024x600 60 37.30

3 VGA Analog -Component Signal

Modes Resolution V.Frequency [Hz] H.Frequency [KHz]

480i 720x480 59.94 (29.97) 27.00

480p 720x480 59.94 31.47

576i 720x576 50(25) 27.00 576p 720x576 50 31.25 720p 1280x720 60 45.00 720p 1280x720 50 37.50 1080i 1920x1080 60(30) 33.75 1080i 1920x1080 50(25) 33.75

1080p 1920x1080 60 67.50 1080p 1920x1080 50 56.26

B. HDMI Digital

1 HDMI - PC Signal

Modes Resolution V.Frequency [Hz] H.Frequency [KHz]

VGA 640x480 60 31.47

640x480 72 37.86 640x480 75 37.50 640x480 85 43.27 640x480 119.51 61.61

SVGA 800x600 56 35.20

800x600 60 37.88 800x600 72 48.08

Page 69

800x600 75 46.88 800x600 85 53.67 800x600 119.85 77.20

XGA 1024x768 60 48.36

1024x768 70 56.48 1024x768 75 60.02 1024x768 119.804 98.80 1152x864 75 67.50

1152x864 85 77.10 1280x1024 60 64.00 1280x1024 72 77.90 1280x1024 75 79.98 1280x1024 85 91.15

1280x960 75 75.00

PowerBook G4 640x480 60 31.50

640x480 66.6(67) 35.00

800x600 60 37.88 1024x768 60 48.36 1152x870 75 68.68 1280x960 75 75.20

i Mac DV (G3)

1024x768 75 60.30

2 HDMI - Extended Wide timing

Modes Resolution V.Frequency [Hz] H.Frequency [KHz] WXGA 1280x768 60 47.78

1280x768 75 60.29 1280x768 85 68.63 1280x720 60 44.80 1280x800 60 49.60 1440x900 60 55.90

1680x1050 60 65.30

1366x768 60 47.71

1920x1080-EIA 60 66.60

1920x1080-RB 60 66.60

1024x600 60 37.30

English

Page 70

English

3 HDMI - Video Signal

Modes Resolution V.Frequency [Hz] H.Frequency [KHz]

480i 720x480(1440x480) 59.94(29.97) 27.00

480p 720x480 59.94 31.47

576i 720x576(1440x576) 50(25) 27.00 576p 720x576 50 31.25 720p 1280x720 60 45.00 720p 1280x720 50 37.50

1080i 1920x1080 60(30) 33.75 1080i 1920x1080 50(25) 33.75 1080p 1920x1080 60 67.50 1080p 1920x1080 50 56.26 1080p 1920x1080 24 27.00 1080p 1920x1080 23.98 26.97

Horizontal scan rate:

Vertical scan rate:

31.5k - 100 kHz 50 - 85 Hz,

120Hz (for 3D mode only)

Page 71

Regulations and safety notices

FCC notice

This device has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This device generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this device does cause harmful interference to radio or television reception, which can be determined by turning the device off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the device and receiver.

• Connect the device into an outlet on a circuit different from that to which

the receiver is connected.

• Consult the dealer or an experienced radio/television technician for help.

Notice: Shielded cables

All connections to other computing devices must be made using shielded cables to maintain compliance with FCC regulations.

Notice: Peripheral devices

Only peripherals (input/output devices, terminals, printers, etc.) certified to comply with the Class B limits may be attached to this equipment. Operation with non-certified peripherals is likely to result in interference to radio and TV reception.

English

Caution

Changes or modifications not expressly approved by the manufacturer could void the user's authority, which is granted by the Federal Communications Commission, to operate this device.

Operation conditions

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Notice: Canadian users

This Class B digital apparatus complies with Canadian ICES-003.

Page 72

English

Remarque à l'intention des utilisateurs canadiens

Cet appareil numérique de la classe B est conforme a la norme NMB-003 du Canada.

Declaration of Conformity for EU countries

Acer hereby declares that this projector series is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.

Compliant with Russian regulatory certification

Radio device regulatory notice

Note: The regulatory information below is for models with wireless LAN and/or Bluetooth only.

General

This product complies with the radio frequency and safety standards of any country or region in which it has been approved for wireless use. Depending on configurations, this product may or may not contain wireless radio devices (such as wireless LAN and/or Bluetooth modules).

Canada — Low-power license-exempt radio communication devices (RSS-210)

a Common information

Operation is subject to the following two conditions:

1. This device may not cause interference, and

2. This device must accept any interference, including interference that may cause undesired operation of the device.

b Operation in 2.4 GHz band

To prevent radio interference to the licensed service, this device is intended to be operated indoors and installation outdoors is subject to licensing.

List of applicable countries

This device must be used in strict accordance with the regulations and constraints in the country of use. For further information, please contact the local office in the country of use. Please see http://ec.europa.eu/enterprise/rtte/implem.htm

for the latest country list.

Page 73

8F, 88, Sec. 1, Hsin Tai Wu Rd., Hsichih

Acer Incorporated

Taipei Hsien 221, Taiwan

Declaration of Conformity

We,

Acer Incorporated

8F, 88, Sec. 1, Hsin Tai Wu Rd., Hsichih, Taipei Hsien 221, Taiwan Contact Person: Mr. Easy Lai, e-mail:easy_lai@acer.com.tw

And,

Acer Europe SA

Via Cantonale, Centro Galleria 2 6928 Manno Switzerland

Hereby declare that:

Product: Projector Trade Name: Acer Model Number: DSV0903/DNX0904/DNX0905/ DNX0906/DWX0907/

Machine Type: P1100/P1200/P1203/P1206/P1303W/P1100A/P1200A/

Is compliant with the essential requirements and other relevant provisions of the following EC directives, and that all the necessary steps have been taken and are in force to assure that production units of the same product will continue comply with the requirements.

EMC Directive 2004/108/EC as attested by conformity with the following harmonized standards:

-. EN55022, AS/NZS CISPR22, Class B

-. EN55024

-. EN61000-3-2 Class A

-. EN61000-3-3

Low Voltage Directive 2006/95/EC as attested by conformity with the following harmonized standard:

-. EN60950-1

RoHS Directive 2002/95/EC on the Restriction of the Use of certain Hazardous Substances in Electrical and Electronic Equipment

-. The maximum concentration values of the restricted substances by weight in homogenous material are:

Lead 0.1% Polybrominated Biphenyls (PBB’s) 0.1% Mercury 0.1% Polybrominated Diphenyl Ethers (PBDE’s) 0.1% Hexavalent Chromium 0.1% Cadmium 0.01%

Directive 2009/125/EC with regard to establishing a framework for the setting of ecodesign requirements for energy-related product.

DSV0908/DNX0909/DNX0910/DNX0911/DNX0912/ DWX0913/DSV0935

P1200i/P1200n/P1200B/P1300WB/P1100C/P1200C series

Page 74

The standards listed below are applied to the product if built with WLAN module or wireless keyboard and mouse.

R&TTE Directive 1999/5/EC as attested by conformity with the following harmonized standard:

z Article 3.1(a) Health and Safety

-. EN60950-1

-. EN62311

z Article 3.1(b) EMC

-. EN301 489-1

-. EN301 489-17

z Article 3.2 Spectrum Usages

-. EN300 328

-. EN301 893 (Applicable to 5GHz high performance RLAN).

8F, 88, Sec. 1, Hsin Tai Wu Rd., Hsichih

Acer Incorporated

Taipei Hsien 221, Taiwan

Year to begin affixing CE marking 2010.

_______________________________

Easy Lai /Manager Date

Regulation Center, Acer Inc.

Mar. 1, 2010

Page 75

Acer America Corporation

333 West San Carlos St., San Jose

CA 95110, U. S. A. Tel : 254-298-4000

Fax : 254-298-4147

www.acer.com

Federal Communications Commission

Declaration of Conformity

The following local Manufacturer / Importer is responsible for this declaration:

Product: DLP Projector

Model Number:

Machine Type: P1100/P1200/P1203/P1206/P1303W/P1100A/

Name of Responsible Party: Acer America Corporation

Address of Responsible Party: 333 West San Carlos St.

Contact Person: Acer Representative

Phone No.: 254-298-4000

Fax No.: 254-298-4147

DSV0903/DNX0904/DNX0905/ DNX0906/DWX0907DSV0908/ DNX0909/DNX0910/DNX0911/ DNX0912/DWX0913/DSV0935

P1200A/P1200i/P1200n/P1200B/P1300WB/

P1100C/P1200C series

San Jose, CA 95110

U. S. A.

Acer P1200N, P1200A, P1200, P1200B, P1100A User Manual

Acer Projector

Information for your safety and comfort

First thing first

Usage notes

Precautions

Contents

Introduction

Product Features

Package Overview

Projector Overview

Getting Started

Connecting the Projector (P1100/P1200/ P1203/P1206/P1303W)

Turning the Projector On/Off

Adjusting the Projected Image

User Controls

Installation menu

Acer Empowering Technology

Onscreen Display (OSD) Menus

Color

Image

Management

Setting

Audio

Timer

Language

Acer LAN webpage management

Appendices

Troubleshooting

LED & Alarm Definition Listing

Replacing and cleaning the dust filters

Replacing the Lamp

Ceiling Mount Installation

Specifications

Compatibility modes

Regulations and safety notices