Product type
Product category B C D
Manufacturer name, address
Product model number
ATC-875 B;
ATC-895 B;
AXC-875 B;
AXC-895 B;
DX6795 B;
SX3795 B.
ATC-875 C;
ATC-895 C;
AXC-875 C;
AXC-895 C;
DX6795 C;
SX3795 C.
ATC-875 D;
ATC-895 D;
AXC-875 D;
AXC-895 D;
DX6795 D;
SX3795 D.
Year of manufacture
E
TEC
allowance with capability
adjustments when discrete graphics
cards are disabled (from 1 January 2016)
174 kWh/year 196 kWh/year 210 kWh/year
E
TEC
allowance with capability
adjustments when discrete graphics
cards are enabled (from 1 January 2016)
296 kWh/year 318 kWh/year 332 kWh/year
Whether all discrete graphics card are
enabled during the test
Yes Yes Yes
Whether switchable graphics mode with
UMA is driving the display during the test
No No No
E
TEC
of highest power-demanding
configuration
100.18 kWh/year 118.51 kWh/year 118.51 kWh/year
Idle state power demand 27.78 Watt 32.96 Watt 32.96 Watt
Sleep mode power demand 0.77 Watt 0.85 Watt 0.85 Watt
Sleep mode with WOL enabled power
demand
0.77 Watt 0.85 Watt 0.85 Watt
Off mode power demand 0.27 Watt 0.32 Watt 0.32 Watt
Off mode with WOL enabled power
demand
0.52 Watt 0.55 Watt 0.55 Watt
Maximum power demand Not applicable Not applicable Not applicable
Internal power supply (IPS) efficiency at
10 %, 20 %, 50 % and 100 % of rated
output power
10% - 88.21%
20% - 91.78%
50% - 91.59%
100% - 87.91%
10% - 88.21%
20% - 91.78%
50% - 91.59%
100% - 87.91%
10% - 88.21%
20% - 91.78%
50% - 91.59%
100% - 87.91%
External power supply's (EPS) average
active efficiency
Not applicable Not applicable Not applicable
Noise levels (the declared A-weighted
sound power level, L
WAd
) of idle mode
3.00 B 3.00 B 3.00 B
Noise levels (the declared A-weighted
sound power level, L
WAd
) of "HDD random
seek" mode
3.40 B 3.40 B 3.40 B
Minimum number of loading cycles that
the batteries can withstand
Not applicable Not applicable Not applicable
Configuration of memory (GB) 2~64 2~64 4~64
Configuration of internal storage (piece) 1~2 1~2 1~2
Configuration of discrete television tuner
(piece)
0 0 0
Technical Documentation of (EU) No 617/2013
Desktop computer
Acer Italy s.r.l.
Viale delle Industrie 1/A, 20020 Arese (MI), Italy
2020
Configuration of discrete audio card
(piece)
0 0 0
Configuration of discrete graphics cards
(piece)
0 ~1 0 ~1 0 ~1
Configuration of discrete graphics cards
category
G7 G7 G7
The external package of the notebook
provides the information, "The battery in
this product cannot be easily replaced by
users themselves."
Not applicable Not applicable Not applicable
For products with an integrated display,
the total content of mercury is
Not applicable Not applicable Not applicable
Measurement methodology for ETEC
Measurement methodology for idle mode
Measurement methodology for sleep
mode
Measurement methodology for off mode
Measurement methodology for IPS
efficiency
Measurement methodology for EPS
efficiency
EN 62623:2013 — Desktop and notebook computers — Measurement of
energy consumption
5.2. Test setup;
5.3.3. Measuring sleep mode;
5.4. Test conditions;
5.7. True RMS watt meter specification;
5.8. True RMS watt meter accuracy.
EN 62623:2013 — Desktop and notebook computers — Measurement of
energy consumption
5.2. Test setup;
5.3.2. Measuring off mode;
5.4. Test conditions;
5.7. True RMS watt meter specification;
5.8. True RMS watt meter accuracy.
Generalized Test Protocol for Calculating the Energy Efficiency of Internal AcDc and Dc-Dc Power Supplies Revision 6.6 (April,2012).
Not applicable
COMMISSION REGULATION (EU) No 617/2013 of 26 June 2013 implementing
Directive 2009/125/EC of the European Parliament and of the Council with
regard to ecodesign requirements for computers and computer servers:
ANNEX II Ecodesign requirements and timetable:
1.1.1. E
TEC
formula.
EN 62623:2013 — Desktop and notebook computers — Measurement of
energy consumption:
5.2. Test setup;
5.3.5. Measuring short idle mode;
5.7. True RMS watt meter specification;
5.8. True RMS watt meter accuracy;
Annex E.2 (informative) ENERGY STAR® V5 compliant testing methodology.
Measurement methodology for noise level
Measurement methodology for battery
loading cycles
Sequence of steps for achieving a stable
condition with respect to power demand
Description of how sleep mode was
selected or programmed
Description of how off mode was selected
or programmed
Sequence of events required to reach the
mode where the equipment automatically
changes to sleep mode
Sequence of events required to reach the
mode where the equipment automatically
changes to off mode
The duration of idle state condition before
the computer automatically reaches sleep
mode, or another condition which does
not exceed the applicable power demand
requirements for sleep mode
The length of time after a period of user
inactivity in which the computer
automatically reaches a power mode that
has a lower power demand requirement
than sleep mode
The length of time before the display
sleep mode is set to activate after user
inactivity
30 minutes
10 minutes
EN 62623:2013 — Desktop and notebook computers — Measurement of
energy consumption:
5.2. Test setup;
5.3.2. Measuring off mode;
5.3.3. Measuring sleep mode;
5.3.5. Measuring short idle mode.
EN 62623:2013 — Desktop and notebook computers — Measurement of
energy consumption
5.2. Test setup;
5.3.3. Measuring sleep mode;
EN 62623:2013 — Desktop and notebook computers — Measurement of
energy consumption
5.2. Test setup;
5.3.2. Measuring off mode;
ENERGY STAR® Program Requirements Product Specification for Computers,
Eligibility Criteria Version 6.0, Rev. Oct-2013:
1.D.4 Sleep Mode.
Not applicable
30 minutes
ECMA-109 2nd edition (December 1987) Declared Noise Emission Values of
Computer and Business Equipment:
4. Determination of the declared noise emission values.
ECMA-74 11th edition (December 2010) Measurement of Airborne Noise
emitted by Information Technology and Telecommunications Equipment:
5. Installation and operating instructions;
6. Method for determination of sound power levels of equipment in reverberation
test rooms;
7. Method for determination of sound power levels of equipment under
essentially free-field conditions over a reflecting plane;
Annex C.15 Equipment category: personalcompute rs and workstations.
Not applicable
User information on the energy-saving
potential of power management
functionality
User information on how to enable the
power management functionality
Test parameter for ambient temperature
Test parameter for test voltage
Test parameter for frequency
Test parameter for total harmonic
distortion of the electricity supply system
Test parameter for information and
documentation on the instrumentation,
set-up and circuits used for electrical
testing
50 Hz
3 %
AC source- Chroma 6530
Digital meter- YOKOGAWA WT210
http://www.energystar.gov/index.cfm?c=power_mgt.pr_power_mgt_users
http://www.energystar.gov/index.cfm?c=power_mgt.pr_power_mgt_users
25 ℃
230 V
Loading...