Acer ASPIRE E1-572PG, ASPIRE E1-572P, ASPIRE E1-532G, ASPIRE E1-532, ASPIRE E1-532P User Manual [uk]

Product type

Product category A B

Manufacturer name, address

Product model number
Year of manufacture

E

TEC

allowance with capability
adjustments when discrete graphics cards
are disabled (from 1 July 2014)

36 kWh/year 49.6 kWh/year

E

TEC

allowance with capability
adjustments when discrete graphics cards
are enabled (from 1 July 2014)

Not applicable 69.6 kWh/year

E

TEC

allowance with capability
adjustments when discrete graphics cards
are disabled (from 1 January 2016)

27 kWh/year 37.6 kWh/year

E

TEC

allowance with capability
adjustments when discrete graphics cards
are enabled (from 1 January 2016)

Not applicable 57.6 kWh/year

Whether all discrete graphics card are
enabled during the test

Not applicable No

Whether switchable graphics mode with
UMA is driving the display during the test

Not applicable Yes

E

TEC

of highest power-demanding
configuration

13.83 kWh/year 14.32 kWh/year

Idle state power demand 4.7 Watt 4.9 Watt

Sleep mode power demand 0.33 Watt 0.36 Watt

Sleep mode with WOL enabled power
demand

0.33 Watt 0.36 Watt

Off mode power demand 0.23 Watt 0.2 Watt

Off mode with WOL enabled power

0.22 Watt 0.22 Watt

Maximum power demand Not applicable Not applicable

Internal power supply (IPS) efficiency at
10 %, 20 %, 50 % and 100 % of rated
output power

Not applicable Not applicable

External power supply's (EPS) average
active efficiency

86.45% 87.80%

Noise levels (the declared A-weighted
sound power level, L

WAd

) of idle mode

2.7 B 2.7 B

Technical Documentation of (EU) No 617/2013

Notebook computer

Acer Italy s.r.l,
Via Lepetit, 40, 20020 Lainate (MI) Italy

Aspire E1-532;

Aspire E1-572

2014

Noise levels (the declared A-weighted
sound power level, L

WAd

) of "HDD random

seek" mode

2.7 B 2.7 B

Minimum number of loading cycles that
the batteries can withstand

400 cycles 400 cycles

Configuration of memory 2~ 8 GB 2~ 8 GB

Configuration of internal storage 1 piece 1 piece

Configuration of discrete television tuner 0 piece 0 piece

Configuration of discrete audio card 0 piece 0 piece

Configuration of discrete graphics cards 0 piece 1 piece

Configuration of discrete graphics cards
category

Not applicable G2

The battery in this product cannot be
easily replaced by users themselves

No No

For products with an integrated display,
the total content of mercury is

0 mg 0 mg

Measurement methodology for E

TEC

Measurement methodology for idle mode

COMMISSION REGULATION (EU) No
617/2013 of 26 June 2013 implementing
Directive 2009/125/EC of the European
Parliament and of the Council with regard
to ecodesign requirements for computers
and computer servers:
ANNEX II Ecodesign requirements and
timetable:

1.3.1. E

TEC

formula.

EN 62623:2013 — Desktop and notebook
computers — Measurement of energy

consumption:

5.2. Test setup;

5.3.4. Measuring long idle mode;

5.7. True RMS watt meter specification;

5.8. True RMS watt meter accuracy;
Annex E.2 (informative) ENERGY STAR

®

V5 compliant testing methodology.

Measurement methodology for sleep
mode

Measurement methodology for off mode

Measurement methodology for IPS
efficiency

Measurement methodology for EPS
efficiency

EN 62623:2013 — Desktop and notebook
computers — Measurement of energy

consumption:

5.2. Test setup;

5.3.3. Measuring sleep mode;

5.4. Test conditions;

5.7. True RMS watt meter specification;

5.8. True RMS watt meter accuracy.

EN 62623:2013 — Desktop and notebook
computers — Measurement of energy

consumption:

5.2. Test setup;

5.3.2. Measuring off mode;

5.4. Test conditions;

5.7. True RMS watt meter specification;

5.8. True RMS watt meter accuracy.

Not applicable

EN 50563:2011 External a.c.—d.c. and
a.c.—a.c. power supplies — Determination

of no-load power and average efficiency of
active modes.

Measurement methodology for noise level

Measurement methodology for battery
loading cycles

Sequence of steps for achieving a stable
condition with respect to power demand

Description of how sleep mode was
selected or programmed

ECMA-109 2nd edition (December 1987)
Declared Noise Emission Values of
Computer and Business Equipment:

4. Determination of the declared noise
emission values.

ECMA-74 11th edition (December 2010)
Measurement of Airborne Noise emitted
by Information Technology and
Telecommunications Equipment:

5. Installation and operating instructions;

6. Method for determination of sound
power levels of equipment in reverberation
test rooms;

7. Method for determination of sound
power levels of equipment under
essentially free-field conditions over a
reflecting plane;
Annex C.15 Equipment category:
personal computers and workstations.

EN 61960:2011 Secondary cells and
batteries containing alkaline or other non-

acid electrolytes — Secondary lithium cells

and batteries for portable applications:

7.6.1 General;

7.6.3 Endurance in cycles (accelerated
test procedure).

EN 62623:2013 — Desktop and notebook
computers — Measurement of energy

consumption:

5.2. Test setup;

5.3.2. Measuring off mode;

5.3.3. Measuring sleep mode;

5.3.4. Measuring long idle mode.

EN 62623:2013 — Desktop and notebook
computers — Measurement of energy

consumption:

5.2. Test setup;

5.3.3. Measuring sleep mode.

Description of how off mode was selected
or programmed

Sequence of events required to reach the
mode where the equipment automatically
changes to sleep mode

Sequence of events required to reach the
mode where the equipment automatically
changes to off mode

The length of time after a period of user
inactivity in which the computer
automatically reaches a power mode that
has a lower power demand requirement
than sleep mode

The length of time before the display
sleep mode is set to activate after user
inactivity

User information on the energy-saving
potential of power management
functionality

User information on how to enable the
power management functionality

Test parameter for ambient temperature

Test parameter for test voltage

Test parameter for frequency

Test parameter for total harmonic
distortion of the electricity supply system

Test parameter for information and
documentation on the instrumentation,
set-up and circuits used for electrical
testing

Not applicable

EN 62623:2013 — Desktop and notebook
computers — Measurement of energy

consumption:

5.2. Test setup;

5.3.2. Measuring off mode.

ENERGY STAR® Program Requirements
Product Specification for Computers,
Eligibility Criteria Version 6.0, Rev. Oct­2013:

1.D.4 Sleep Mode.

50 Hz

3 %

AC Power Source EXTECH 6800 SERIES
Power Meter YOKOGAWA WT210

30 minutes

10 minutes

http://www.energystar.gov/index.cfm?c=po
wer_mgt.pr_power_mgt_users

http://www.energystar.gov/index.cfm?c=po
wer_mgt.pr_power_mgt_users

25 ℃

230 V