The information in this guide is subject to change without notice.
Acer Incorporated makes no representations or warranties, either expressed or implied, with respect to the
contents hereof and specifically disclaims any warranties of merchantability or fitness for any particular
purpose. Any Acer Incorporated software described in this manual is sold or licensed "as is". Should the
programs prove defective following their purchase, the buyer (and not Acer Incorporated, its distributor, or its
dealer) assumes the entire cost of all necessary servicing, repair, and any incidental or consequential
damages resulting from any defect in the software.
Acer is a registered trademark of Acer Corporation.
Intel is a registered trademark of Intel Corporation.
Pentium and Pentium II/III are trademarks of Intel Corporation.
Other brand and product names are trademarks and/or registered trademarks of their respective holders.
III
Conventions
The following conventions are used in this manual:
Screen messagesDenotes actual messages that appear
on screen.
NOTEGives bits and pieces of additional
information related to the current
topic.
WAR NIN GAlerts you to any damage that might
result from doing or not doing specific
actions.
CAUTIONGives precautionary measures to
avoid possible hardware or software
problems.
IMPORTANTReminds you to do specific actions
relevant to the accomplishment of
procedures.
IV
Preface
Before using this information and the product it supports, please read the following general information.
1.This Service Guide provides you with all technical information relating to the BASIC CONFIGURATION
decided for Acer's "global" product offering. To better fit local market requirements and enhance product
competitiveness, your regional office MAY have decided to extend the functionality of a machine (e.g.
add-on card, modem, or extra memory capability). These LOCALIZED FEATURES will NOT be covered
in this generic service guide. In such cases, please contact your regional offices or the responsible
personnel/channel to provide you with further technical details.
2.Please note WHEN ORDERING FRU PARTS, that you should check the most up-to-date information
available on your regional web or channel. If, for whatever reason, a part number change is made, it will
not be noted in the printed Service Guide. For ACER-AUTHORIZED SERVICE PROVIDERS, your Acer
office may have a DIFFERENT part number code to those given in the FRU list of this printed Service
Guide. You MUST use the list provided by your regional Acer office to order FRU parts for repair and
service of customer machines.
Microsoft Windows XP Environment Test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120
Appendix COnline Support Information 121
Index123
VIII
System Specifications
Features
This computer was designed with the user in mind. Here are just a few of its many features:
Performance
❑Intel
❑128 MB memory onboard and one memory upgrade slot
❑Large LCD display with adjustable video memory
❑High-capacity, Enhanced-IDE hard disk
❑Lithium-Ion main battery pack
❑Power management system
❑DualView capability
❑Simultaneous LCD and CRT display
Display
❑14.1” Thin-Film Transistor (TFT) liquid-crystal display (LCD) displaying 16.7 million colors at
❑AGP 4X support
❑Video memory allocaton from main memory (BIOS)
❑Simultaneous LCD and CRT display
®
PentiumTM III or Intel® CeleronTM processor with one-die level 2 cache
1024X768 eXtended Graphics Array (XGA) resolution -or- 15.0” TFT LCD displaying 16.7 million
colors at 1400X1050 Super eXtended Graphics Array Plus (SXGA+) resolution
Chapter 1
Multimedia
❑16-bit high-fidelity stereo audio with 3-D sound
❑Built-in dual stereo speakers
❑Internal optical drive (CD-ROM, DVD-ROM, or DVD/CD-RW combo)
❑Audio DJ (CD playback) feature
❑S-video (NTSC/PAL) output
Connectivity
❑High-speed 56Kbps V.90 fax/data software modem
❑Ethernet/Fast Ethernet (10/100 Mbps)
❑CarBus PC Card slots
❑Universal Serial Bus (USB) ports
❑IEEE 1394 port
Chapter 11
Human-centric design and ergonomics
❑All-in-one design (CD or DVD, floppy drive, and hard disk)
❑Sleek, smooth and stylish design
❑Full-sized keyboard
❑Wide and curved palm rest
❑Ergonomically-centered touchpad pointing device
❑Launch keys (supports Audio DJ feature)
Expansion
❑Upgradeable memory and hard disk
Keyboard and Pointing Device
❑85-/86-key Windows keyboard
❑Ergonomically-centered touchpad pointing device
I/O Ports
❑One type III or two typeII/I PC Card slots (PCMCIA, CardBus)
❑One RJ-11 modem jack (V.90, 56K)
❑One RJ-45 network jack (Ethernet 10/100)
❑One DC-in jack
❑One parallel port (ECP/EPP)
❑One external monitor port
❑One keyboard/mouse port (PS/2)
❑One speaker/headphone-out jack (3.5mm minijack)
❑One microphone-in jack (3.5mm minijack)
❑One video-out jack (S-video)
❑Two Universal Serial Bus (USB) ports
❑One IEEE 1394 port
2Chapter 1
System Block Diagram
System Block Diagram
Mini PCI
Socket
PIRQB#/PIRQD#
GNT#0/REQ#0
GNT#1/REQ#1
AD27/AD28
Power On/Off
Reset Circuit
DC/DC Interface
RTC Battery
CRT
Connector
TV_OUT
Connector
TFT Panel
Interface
CardBus
OZ6933
PIRQA#/PIRQB#
GNT#3/REQ#3
AD15
Slot 0&1
INTEL FC-PGA370
Twister PN-133T
(VT8606)
AD(0..31)
IEEE 1394
PIRQC#
GNT#2/REQ#2
AD24
Slot 0
HD#(0..63)HA#(3..31)
PCIGNT#/PCIREQ#
PIRQA#
MA(0..13)
MD(0..63)
Memory Damping
Resistor
1
USB Port 0,1
FIR
AC97
Interface
KeyBoard
87570
APICCLK
HCLK_CPU
HCLK_NB
PCLK_NB
DCLKWR
On Board
64/128MB
(Bank 0)
ISA BUS
CLK_SDRAM0
SO-DIMM 0
(Bank 2,3)
PCI BUS
VT686B
SA(0..15)
SD(0..15)
Y1
14.318MHZ
Clock Generator
ICS 9248-195
DCLKO
CLK_SDRAM2,3
48MHZ
IDE Damping
Resistor
IDE Connector
(FDD/HDD/CR-ROM)
14MCRT/14.3M_TV
PCLK_SB
14MOSC
IDE CHANNEL
Pull Up/Down
Resistor
14MOSC
PCLK_1394
PCLK_PCM
PCLK_MINI
PIO
DIRECT
CD-PLAY
FUNCTION
KBD
Touch Pad
Power Circuit
DC/DC
I/O Buffer
BIOS
Chapter 13
Board Layout
Top Vie w
1Power On/Off LID switch5Software debug only, normally shipping on
this connector
2LCD connector6FDD connector
3LID switch7Internal keyboard connector
4System board connector8Switch board connector
4Chapter 1
Bottom View
1Mini PCI connector9So-DIMM connector for SDRAM only
21394 Connector10CPU fan connector
3CPU socket for FC-PGA37011PCMCIA socket connector
4CD-ROM connector12Battery connector
5Print port connector13AC adapter input connector
6CRT connector14PS/2 keyboard and PS/2 mouse connector
7TV out connector for S-video only15USB connector
8HDD connector16USB connector
Chapter 15
Outlook View
A general introduction of ports allow you to connect peripheral devices, as you would with a desktop PC.
Front View
6Chapter 1
#IconItemDescription
11Display screenAlso called LCD (liquid-crystal display),
2Power buttonTurns on the computer power.
3Status LCDLCD that display icons to show the status
4KeyboardInputs data into your computer.
5TouchpadTouch-sensitive pointing device which
6Click buttons (left and
right)
7Launch keysButtons for launching frequently-used
8Status indicatorsShows the power and email status.
9SpeakerOutputs sound.
10PalmrestComfortable support area for your hands
11Floppy driveAccepts a 3.65-inch diskette.
12Floppy drive eject
button
displays computer output.
of the computer and its functions and
components.
functions like a computer mouse.
The left and right buttons function like the
left and right mouse buttons.
programs. Please seee User’s Guide
“Launch keys” on page 22 for more details.
when you use the computer.
Press to eject the diskette from the floppy
drive.
Chapter 17
Left Panel
#IconItemDescription
1Optical driveDepending on your model:
2Optical drive eject
--CD-ROM drive reads CDs
--DVD-ROM drive reads CDs and DVDs
--DVD/CD-RW combo drive reads CDs and
DVDs, and writes to CD-Rs and CD-RWs.
Ejects the disc from the optical drive.
button
3Optical drive
emergency eject hole
Eject the disc from the optical drive when
the computer is turned off.See User’s
Guide “How do I eject the optical drive tray
with the computer turned off?” on page 78
fo more details.
8Chapter 1
Right Panel
#IconItemDescription
1Speaker/headphone-
2Microphone-in jackConnects and external microphone.
3PC Card eject buttons Eject the selected PC Card from its slot.
4PC Card slotsAccepts one Type III or two TypeII/I PC
out jack
Connects to audio line-out devices (e.g.,
speakers, headphones).
Card(s).
5DC-in jackConnects to the AC adapter.
6PS/2 portConnects toa PS/2-compatible device
(e.g., PS/2 keyboard/mouse/keypad).
7USB port (two)Connects to the USB devices (e.g., USB
mouse).
Chapter 19
Rear Panel
#IconItemDescription
1Security keylockConnects to a Kensington-compatible
computer security lock.
2IEEE 1394 portConnects to a IEEE 1394 compatible
3Network jackConnects to an Ethernet 10/100-based
4Modem jackConnects a phone line (only for models
5Parallel portConnects to a parallel device (e.g., parallel
6External display portConnects t a display monitor.
7Video-out portConnects to a display device with S-video
device (e.g., digital camcorder).
network.
with an internal fax/data modem).
printer).
input.
10Chapter 1
Bottom Panel
#IconItemDescription
1Hard disk bayHouses the computer’s hard disk.
2Battery release button Press and hold to release the battery latch.
3Battery release latchUnlatches the battery to remove the battery
4Battery bayHouses the computer’s battery pack.
5Memory compartmentHouses the computer’s main memory.
pack.
Chapter 111
Indicators
The computer has an easy-to-read status LCD (1) located above the keyboard. Two status indicators, power
(2), and email (3) are located near the front of the computer.
The status LCD displays icons that show the status of the ocmpouter and its components..
IconFunctionDescription
Caps lockCaps Lock is activated.
Num lockNumeric Lock (for embedded keypad) is
Pad lockPad Lock (for embedded keypad) is
Scroll lockScroll Lock is activated.
Optical drive/Hard disk
activity
Floppy drive activityFloppy drive is being accessed.
activated.
activated.
CD or DVD drive or hard disk is being
accessed.
PC Card activityPC Card is being accessed.
12Chapter 1
IconFunctionDescription
AC powerComputer is running on AC power.
Battery chargeBattery is being charged.
Battery fullBattery is fully charge.
Battery gaugeBatter is 75 to 100 percent full.
Battery gaugeBatter is 31 to 75 percent full, and battery is
running low.
Battery gaugeBattery is 6 to 30 percent full, and battery is
running low.
Note: Charge the battery as soon as
possible.
Battery gaugeBattery is critically-low.
Note: Battery gauge icon is blinking.
Battery gaugeBattery temperature is too high.
Note: Save your work and shut down your
computer to let the battery cool down.
Battery gaugeBattery is not installed.
In addition to the status LCD, the computer includes power and email status indicators.
IconFunctionDescription
PowerLights when the computer is on.
EmailLights when incoming email is received. To
launch your email program and rea dthe
incoming email, press the email button
beside this indicator.
Chapter 113
Lock Keys
The keyboard has three lock keys which you can toggle on and off.
Lock KeyDescription
Caps LockWhen Caps Lock is on, all alphabetic characters typed
Pad Lock
(Fn-F10)
Num lock
(Fn-F11)
Scroll lock
(Fn-F12)
are in uppercase.
When Pad Lock is on, the embedded keypad is in
cursor mode, The keys function as a directional
keypad including Insert and Delete keys.
When Num Lock is on, the embedded keypad is in
numeric mode. The keys function as a calculator
(complete with the arithmetic operators +, -, *, and /).
Use this mode when you need to do a lot of numeric
data entry. A better solution would be to connect an
external keypad. See User’s Manual “External
keyboard” on page 40.
When Scroll Lock is on, the screen moves one line up
or down when you press
Scroll Lock does not work with some applications.
w and y respectively.
14Chapter 1
Embedded Numeric Keypad
The embedded numeric keypad functions like a desktop numeric keypad. It is indicated by small characters
located on the upper right corner of the keycaps. The embedded keypad can function in numberic mode or
cursor-control mode.
Desired AccessNum Lock OnPad Lock On
Number keys on embedded
keypad
Cursor-control keys on
embedded keypad
Main keyboard keysHold Fn while typing letters
Type numbers in a normal
manner.
Hold
j while using
cursor-control keys.
on embedded keypad. Also
hold down
letters.
j for capital
Hold
j while typing
numbers.
Use cursor-control keys in a
normal manner.
Hold Fn while tping letters
on embedded keypad. Also
hold down j for capital
letters.
Chapter 115
Windows Keys
The keyboard has two keys that perform Windows-specific functions.
KeyIconDescription
Windows logo
key
Application
key
Start button. Combinations with this key perform
special functions. Below are a few examples:
+ Tab (Activates next taskbar button)
+ E (Explores My Computer)
+ F (Finds Document)
+ M (Minimizes All)
j + Windows logo key + M (Undoes Minimize All)
+ R (Displays Run dialog box)
Opens a context menu (same as a right-click).
16Chapter 1
Hot Keys
The computer uses hotkey or key combinations to perform functions such as controlling the screen brightness
and specifying where to display output.
Hot KeyIconFunctionDescription
Fn-F5Display toggleSwitches display output between the display screen,
Fn-
wBrightness UpIncreases the screen brightness.
external monitor (if connected) and both the display
screen and external monitor.
yBrightness DownDecreases the screen birghtness.
Fn-
NOTE: When activating hotkeys, press and hold the Fn key before pressing the other key in the hotkey
combination.
Chapter 117
Keyboard Ergonomics
Located below the keyboard, the wide and curved palm rest is ergonomically desinged to provide you with a
very comfortable place to rest your hands while you type.
18Chapter 1
Touchpad
The built-in touchpad is a PS/2-compatible pointing device that senses movement on its surface. This means
the cursor responds as you move your finger on the surface of the touchpad. The central location on the palm
rest provides you optimum comfort and support.
NOTE: If you are using an external PS/2 mouse, the touchpad is automatically disabled. You can enable or
disable this function in BIOS.
Touchpad Basics
The following teaches you how to use the touchpad:
❑Move your finger across the touchpad to move the cursor.
❑Press the left (1) and right (2) buttons located on the edge of the touchpad to do selection and
execution functions. These two buttons are similar to the left and right buttons on a mouse.
Tapping on the touchpad produces similar results.
FunctionLeft ButtonRigh ButtonTap
ExecuteClick twice
quickly
SelectClick onceTap once
DragClick and hold,
then use finger
to drag the
cursor on the
touchpad
Access context
menu
Scroll
Click once
Tap twice (at the same
speed as double-clicking
the mouse button)
Tap twice (at the same
speed as double-clicking
a mouse button) then hold
finger to the touchpad on
the second tap to drag the
cursor
Chapter 119
NOTE: Keep your fingers dry and clean when using the touchpad. Also keep the touchpad dry and clean. The
touchpad is sensitive to finger movements. Hence, the lighter the touch, the better the response.
Tapping too hard will not increase the touchpad’s responsiveness.
20Chapter 1
Launch Keys
Located near the front end of the computer (between the speakers) are launch keys that perform various
functions.
Depending on the set mode, these launch keys may be used to launch applications for play back music CDs.
NOTE: The Audio DJ feature is also available even when the computer is off.
#IconItemDescription
1Mode SwitchThis sets the launch key mode. Slide the
switch to the desired mode.
1
1
1
21
(
AP mode)
2Stop/Eject
(
Audio DJ mode)
AP (Application) mode.
Lock mode
Audio DJ mode
Launches a user-configurable application.
Stop playback of the music CD; when
playback is stopped, ejects the drive tray.
Chapter 121
#IconItemDescription
32
(
AP mode)
Launches a user-configurable application.
3Play/Pause
(
Audio DJ mode)
4Email
AP mode)
(
4Previous Track
Audio DJ mode)
(
5Internet Browser
AP mode)
(
5Next Track
(
Audio DJ mode)
6Volume ButtonsDecreases (-) or increase (+) the volume.
Plays and pauses playback of the music CD.
Launches your email program.
Jumps to the previous track on the music CD.
(AP mode)
Launches your internet browser.
Jumps to the next track on the music CD.
22Chapter 1
Loading...
+ 102 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.