Acer 11b User Manual
Quick Installation Guide of Acer WLAN 11b Broadband Router
Preparation
1 At lease one PC with IEEE802.11b WLAN client installed.
2 One straight-through Category 5 Ethernet cable, used to link WAN interface to xDSL or CM for
Internet connection.
3 Acer WLAN 11b Broadband Router.
Check package contents:
Acer WLAN 11b Broadband Router
DC 9V Power Adapter
User’s manual CD-ROM
Collect Installation Information:
WAN configuration (Contact your ISP or network administrator for these information)
Attain IP Automatically (DHCP)
Fixed IP
IP Address
Subnet Mask
Default Gateway
DNS Address
PPPoE
User Name
Password
LAN configuration
IP Address
Subnet Mask
Default Gateway
DHCP Client Range
□□□.□□□.□□□.□□□
□□□.□□□.□□□.□□□
□□□.□□□.□□□.□□□
□□□.□□□.□□□.□□□
□□□.□□□.□□□.□□□
□□□.□□□.□□□.□□□
□□□.□□□.□□□.□□□
□□□.□□□.□□□.□□□–□□□.□□□.□□□.□□□
WLAN configuration
SSID
Channel Number
1 of 7
Quick Installation Guide of Acer WLAN 11b Broadband Router
Parts and Functions of Acer WLAN 11b Broadband Router:
Figure 1 – Acer WLAN 11b Broadband Router Front Panel
LED Indicator State Description
1. Power LED
Off Acer WLAN Broadband Router is powered off.
2. WLAN Activity LED Flashing Data is transmitting or receiving on the
Off No data is transmitting or receiving on the
On Acer WLAN Broadband Router is powered on.
antenna.
WAN LEDLAN LED
Power LED
WLAN LED
antenna.
3. WAN ACT LED Flashing Data is transmitting or receiving on the WAN
interface.
Off No data is transmitting or receiving on the
WAN interface.
4. WAN 10/100M LED On Connection speed is 100Mbps on WAN
interface.
Off Connection speed is 10Mbps on WAN
interface.
5. LAN ACT LED Flashing Data is transmitting or receiving on the LAN
interface.
Off No data is transmitting or receiving on the LAN
interface.
6. LAN 10/100M LED On Connection speed is 100Mbps on LAN
interface.
Off Connection speed is 10Mbps on LAN interface.
2 of 7
Quick Installation Guide of Acer WLAN 11b Broadband Router
r
Antenna
WA N
Figure 2 – Acer WLAN 11b Broadband Router Rear Panel
Interfaces Description
1. WAN The RJ-45 socket allows WAN connection through a Category
5 cable. Support auto-sensing on 10/100M speed and half/ full
duplex; comply with IEEE 802.3/ 802.3u respectively.
2. LAN The RJ-45 sockets allow LAN connection through Category 5
cables. Support auto-sensing on 10/100M speed and half/ full
duplex; comply with IEEE 802.3/ 802.3u respectively.
3. Power The power jack allows an external DC +9 V power supply
LAN
Powe
connection.
The external AC to DC adaptor provide adaptive power
requirement to the WLAN Broadband Router.
4. Antenna The Wireless LAN Antenna.
3 of 7
Loading...