Page 1
Acctemp Products, Inc. 8415 North Cllinton ParkFort Wayne, IN 46825 +1-800.480.0415
-www.accutemp.net
SP8014-0905
EVOLUTION
STEAMER
PARTS MANUAL
Page 2
TABLE OF CONTENTS i
VOLTAGE
DOCUMENT HISTORY ii
MODEL CONFIGURATION 1-2
– WATTAGE - PHASE ASSEMBLY 3-4
COMMON COMPONENTS ASSEMBLY 5-9
COMPONENT BRACKET ASSEMBLY 10
DOOR ASSEMBLY 11-14
RELAY ASSEMBLY 15
LEG ASSEMBLY 16
CAST HEATER REPLACEMENT KIT 17
LEG ASSEMBLY 16
CAST HEATER REPLACMENT KIT 17
SCHEMATIC 18-24
WARRANTY 25
CONTACT INFORMATION 26
SP8014-0905 EVOLUTION PARTS MANUAL Page - i
Page 3
D O C UMENT H I S TORY
Current revision: 0509 Prior revision: None
Date: 5/10/09 Date:
Change
Initial release: 5/10/09
SP8014-0905 EVOLUTION PARTS MANUAL Page - ii
Page 4
AT1A-3570 MODULAR BOM FOR 6 PAN STEAMERS
Page 1
SP-8014-0
905
To build up a complete 6 pan steamer assembly BOM, begin with the desired steamer model number,
created from the Steamer Model String Number Configuration (AT1T-2611), and follow steps 1 through 5.
Example: E62083E0803020
NOTES:
SHEET 2 SHOWS COMPONENT AND MODULE ASSEMBLY ORIENTATIONS.1.
STEP 1. MODULE, VOLTAGE WATTAGE PHASE
Using model string digits 1 though 10, locate the generic model number in the chart
and find the corresponding Module, Voltage
Wattage Phase (Digits 2-10).
Example:
Generic Model No. = E62083E080XXXX
Voltage Wattage Phase Module No. = AT1A-3571-4
DIGITS 1-10 GENERIC
MODEL NO.
WATTAGE PHASE
E62081E060XXXX AT1A-3571-1 E62081E060 208 29 6
E62083E060XXXX
E62403E080XXXX
E62083E080XXXX
E62403E110XXXX
E62083E090XXXX
E62403E120XXXX
MODULE,
VOLTAGE
MODEL NO.
DIGITS 1-10
AT1A-3571-2 E62403E080 208/240 17/19 6/8
AT1A-3571-4 E62403E110 208/240 22/26 8/11
AT1A-3571-5 E62403E120 208/240 25/29 9/12
DATA TAGE INFORMATION
VOLTAGE AMPS KWATTS
STEP 2. MODULE, COMMON COMPONENTS
Add the Module, Common Components derived from the model string digit 13.
Examples:
(E62083E08030 0)2
2 = AT1A-3572-1
COMMON
DIGIT 13
2,3,E,F,G,H,I OR J AT1A-3572-1 STD
4,5,M,N,O,P,Q OR R AT1A-3572-2 AUTO-FILL
6,7, K OR L AT1A-3572-3 TAMPER-PROOF
8,9, S OR T AT1A-3572-4 TAMPER-PROOF + AUTO-FILL
COMPONENTS
MODULE
MODULE DESCRIPTION
STEP 3. MODULE, L&R CONFIGURATION
Add the Module, Special Configuration derived from model string digit 13.
Example:
(E62083E080302
2 = AT1A-3600-5
MODULE, L&R
DIGIT 13
CONFIGURATION
2 OR 4 AT1A-3600-1
3 OR 5
A OR C
AT1A-3600-1
AT1A-3600-2 RH TAMPER-PROOF DOOR + STD STRIKER PLT
B OR D AT1A-3600-2 LH TAMPER-PROOF DOOR + STD STRIKER PLT
E OR M
AT1A-3600-3 RH HOLD OPEN DOOR + STD STRIKER PLT
0)
MODULE DESCRIPTION & ASSEMBLY ORIENTATION
RH STD DOOR + STD STRIKER PLT
LH STD DOOR + STD STRIKER PLT
STEP 4. MODULE, LEG CONFIGURATION
Add the Module, Leg Configuration derived from model string digit 14
for modification of a standard model steamer.
Example:
(E62083E0803020
0 = AT1A-3500-1
MODULE,
MODULE,
DIGIT 14
DIGIT 14
CONFIGURATION
CONFIGURATION
0 -1 DRAIN PAN RAILS
0 -1
2 -3 4" LEGS + FLANGED FEET
2
4 -4
4 -4
5
5 -2 4" LEGS + BULLET FEET
)
LEG
LEG
-3
4" LEGS + FLANGED FEET
4" LEGS + BULLET FEET +
4" LEGS + BULLET FEET +
TAMPER-PROOF SCREWS
TAMPER-PROOF SCREWS
-2 4" LEGS + BULLET FEET
MODULE,
MODULE,
DESCRIPTION
DESCRIPTION
DRAIN PAN RAILS
E62083E100XXXX AT1A-3571-6 E62083E100 208 28 10
E62083E120XXXX
AT1A-3571-7 E62403E160 208/240 33/38.5 12/16
E62403E160XXXX
E62083E150XXXX AT1A-3571-8 E62083E150 208 42 15
E62083E170XXXX AT1A-3571-9 E62083E170 208 47 17
E62301E073XXXX AT1A-3571-10 E62301E073 230 32 7.3
E62401E060XXXX AT1A-3571-11 E62401E060 240 25 6
E62403E060XXXX AT1A-3571-12 E62403E060 240 15.5 6
E62401E080XXXX AT1A-3571-13 E62401E080 240 33 8
E62403E130XXXX AT1A-3571-14 E62403E130 240 32 13
E63805E067XXXX
AT1A-3571-15 E65145E080 380/400/415 10/10.7/11 6.7/7.4/8E64005E074XXXX
E64155E080XXXX
E63805E090XXXX
AT1A-3571-16 E64155E110 380/400/415 13.5/14/15 9/10/11E64005E100XXXX
F OR N AT1A-3600-3 LH HOLD OPEN DOOR + STD STRIKER PLT
G OR O
AT1A-3600-4 RH STD DOOR + CRACK OPEN
H OR P AT1A-3600-4 LH STD DOOR + CRACK OPEN
I OR Q
AT1A-3600-5
RH HOLD OPEN DOOR + CRACK OPEN
LH HOLD OPEN DOOR + CRACK OPENAT1A-3600-5J OR R
K OR S
L OR T
AT1A-3600-6
RH TAMPER-PROOF DOOR + CRACK OPEN
AT1A-3600-6 LH TAMPER-PROOF DOOR + CRACK OPEN
E64155E110XXXX
E63805E100XXXX
AT1A-3571-17 E64155E120 380/400/415 15/16/16.6 10/11/12E64005E110XXXX
E64155E120XXXX
E63805E110XXXX
AT1A-3571-18 E64155E130 380/400/415 17/17.8/18.5 11/12/13E64005E120XXXX
E64155E130XXXX
E63805E130XXXX
AT1A-3571-19 E64155E160 380/400/415 20/21/22 13/15/16E64005E150XXXX
E64155E160XXXX
E64155E060XXXX AT1A-3571-20 E64155E060 415 8 6
E64403E067XXXX
AT1A-3571-21 E64803E080 440/480 9/9.6 6.7/8
E64803E080XXXX
E64403E090XXXX
AT1A-3571-22 E64803E110 440/480 12/13 9/11
E64803E110XXXX
E64403E120XXXX
E64803E140XXXX
E64403E130XXXX
E64803E160XXXX
E64403E150XXXX
E64803E180XXXX
E64403E180XXXX
AT1A-3571-23 E64803E140 440/480 15.7/17 12/14
AT1A-3571-24 E64803E160 440/480 17.6/19 13/16
AT1A-3571-26
E64803E180AT1A-3571-25
E64403E180
19.6/21440/480
440
230E62301F073AT1A-3571-27E62301F073XXXX
15/18
1823
7.332
445 A RELEASED TO PRODUCTION 04-02-09 GLS/ALB
ECN REV DESCRIPTION DATE APPR
REVISIONS
EXAMPLE RESULT:
E62083E0803020 is made from parts and modules AT1A-3571-4 + AT1A-3572-1 + AT1A-3600-5 + AT1A-3500-1
Unless otherwise specified,
Dimensions: Inches
Bends: 90
Tolerances:
Angular 1°
2 Place Decimal .02
3 Place Decimal .005
T.I.R .005
√125 Micro Inches
GD&T Per ANSI Y14.5M
Comments:
Do Not Scale Drawing
Drawn
Checked
Project Eng
Material:
Finish:
Name
ALB
G. SEITZ
LRW
Date
04/02/09
04/02/09
04/02/09
Title
Size
E
Scale: 1:8
AccuTemp Products, Inc.
8415 N. Clinton Park
Fort Wayne, IN 46825
BOM, 6 PAN FINAL
Drawing No.
AT1A-3570
ECN: 445
Sheet 1 of 2
Rev
A
Page 5
AT1A-3572
SP8914-0905
Page 2
MODULE COMMOND COMPONENTS
AT1A-3571
MODULE VOLTAGE, WATTAGE PHASE
AT1A-3600
MODULE DOOR CONFIGURATION
AT1A-3500
MODULE LEG CONFIGURATION
Unless otherwise specified,
Dimensions: Inches
Bends: 90
Tolerances:
Angular 1°
2 Place Decimal .02
3 Place Decimal .005
T.I.R .005
√125 Micro Inches
GD&T Per ANSI Y14.5M
Comments:
Do Not Scale Drawing
Drawn
Checked
Project Eng
Material:
Finish:
Name Date
ALB
G. SEITZ
LRW
N/A
N/A
04/02/09
04/02/09
04/02/09
Title
Drawing No.Size
E
Scale: 1:4
AccuTemp Products, Inc.
8415 N. Clinton Park
Fort Wayne, IN 46825
BOM, 6 PAN FINAL
AT1A-3570
ECN: 445
Sheet 2 of 2
Rev
A
Page 6
NOTES:
SP8914-0905AT1A-3570 - REV-A
Page 3
VOLTAGE - WATTAGE - PHASE ASSEMBLY
SEE AT1A-3570 BOM, FINAL FOR STEAMER COMPONENT AND MODULE ASSEMBLY ORIENTATIONS.1.
2
3
ITEM #11 (AT0E-2680) TERMINALS TO BE USED FOR TERMINATION OF ITEM #5 (AT1E-3361) HEATER WIRES.
APPLY ITEM #10 (AT0H-3412) JOINT COMPOUND EVENLY ONTO ITEM #5 (AT1E-3361) CAST HEATER,
COMPLETELY COVERING THE SURFACE THAT WILL BE IN CONTACT WITH THE CHAMBER BOTTOM.
- - - - - - - - - - - - - - - - 1 - - - - - - - - 12 AT1T-3595-6 SCHEMATIC, STEAMER, ATMOSPHERIC
- - - - - - - - - - - - - - - - - 1 1 - - - - - - 12 AT1T-3595-5 SCHEMATIC, STEAMER, ATMOSPHERIC
1 1 1 1 1 1 - - - - - - - - - - - - - - - - - - - 12 AT1T-3595-4 SCHEMATIC, STEAMER, ATMOSPHERIC
- - - - - - 1 1 1 1 1 1 - - - - - - - - - - - - - 12 AT1T-3595-3 SCHEMATIC, STEAMER, ATMOSPHERIC
- - - - - - - - - - - - 1 - 1 - - - - 1 1 1 1 1 - 12 AT1T-3595-2 SCHEMATIC, STEAMER, ATMOSPHERIC
- - - - - - - - - - - - - 1 - 1 - - - - - - - - 1 12 AT1T-3595-1 SCHEMATIC, STEAMER, ATMOSPHERIC
6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 11 AT0E-2680-5 RING TERMINAL INSULATED #10 STUD 10-12 AWG
AR AR AR AR AR AR AR AR AR AR AR AR AR AR AR AR AR AR AR AR AR AR AR AR AR 10 AT0H-3412-1 WAKEFIELD 120 THERMAL JOINT COMPOUND
- - - - - - 1 1 1 1 1 1 - - - - 1 - - - - - - - - 9 AT1L-3116-2 TAG, STEAMER DATA
1 1 1 1 1 1 - - - - - - 1 1 1 1 - 1 1 1 1 1 1 1 1 9 AT1L-3116-1 TAG, STEAMER DATA
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 8 AT0A-2736-8 MOV- TERMINALS ASSEMBLY
2 2 2 2 2 2 2 2 2 2 2 2 - - - - - - - - - - - - - 7 AT0A-2736-4 MOV- TERMINALS ASSEMBLY
- - - - - - - - - - - - 2 1 2 1 1 2 2 2 2 2 2 2 1 7 AT0A-2736-2 MOV- TERMINALS ASSEMBLY
- - - - - - - - - - - - - - - - - 1 1 - - - - - - 6 AT1A-2511-8 HEAT SINK ASSY, TRIPLE SSR
1 1 1 1 1 1 1 1 1 1 1 1 1 - 1 - - - - 1 1 1 1 1 - 6 AT1A-2511-7 HEAT SINK ASSY, DOUBLE SSR
- - - - - - - - - - - - - 1 - 1 1 - - - - - - - 1 6 AT1A-2511-6 HEAT SINK ASSY, SINGLE SSR
- - - - - - - - - - - - - - - - - - 1 - - - - - - 5 AT1E-3361-8 CAST ALUM HEATER ASSEMBLY
- - - - - - - - - - - - - - - - - 1 - - - - - - - 5 AT1E-3361-7 CAST ALUM HEATER ASSEMBLY
- 1 - - - - - - 1 - - - 1 - - - - - - - 1 - - - - 5 AT1E-3361-6 CAST ALUM HEATER ASSEMBLY
- - 1 - - - - - - 1 - - - - - - - - - - - 1 - - - 5 AT1E-3361-5 CAST ALUM HEATER ASSEMBLY
1 - - - - - - 1 - - - - - - - - - - - 1 - - - - - 5 AT1E-3361-4 CAST ALUM HEATER ASSEMBLY
- - - 1 - - - - - - 1 - - - - - - - - - - - 1 - - 5 AT1E-3361-3 CAST ALUM HEATER ASSEMBLY
- - - - - 1 1 - - - - - - - 1 1 - - - - - - - - - 5 AT1E-3361-2 CAST ALUM HEATER ASSEMBLY
- - - - 1 - - - - - - 1 - 1 - - 1 - - - - - - 1 1 5 AT1E-3361-1 CAST ALUM HEATER ASSEMBLY
- - - - - - 2 2 2 2 2 2 - - - - 2 - - - - - - - - 4 AT0H-3641-2 WASHER, 1 1/4 x 3/4 REDUCING
2 2 2 2 2 2 - - - - - - 2 2 2 2 - - - 2 2 2 2 2 2 4 AT0H-3641-1 WASHER, 1 1/4 x 1 REDUCING
- - - - - - - - - - - - - - - - - 1 1 - - - - - - 3 AT0E-2086-4 CORD GRIP LOCKNUT
1 1 1 1 1 1 - - - - - - 1 1 1 1 - - - 1 1 1 1 1 1 3 AT0E-2086-3 CORD GRIP LOCKNUT
- - - - - - 1 1 1 1 1 1 - - - - 1 - - - - - - - - 2 AT0E-3384-1 CONNECTOR, STRAIN RELIEF 3/4 NPT LIQUID TIGHT
- - - - - - - - - - - - - - - - - 1 1 - - - - - - 2 AT0E-1049-6 CONNECTOR, 1 1/4" HUB STRAIN RELIEF
1 1 1 1 1 1 - - - - - - - - 1 1 - - - - - - 1 1 1 2 AT0E-1049-5 CONNECTOR, 1" HUB STRAIN RELIEF
- - - - - - - - - - - - 1 1 - - - - - 1 1 1 - - - 2 AT0E-1049-4 CONNECTOR, 1" HUB STRAIN RELIEF
- - - - - - - - - - - - - - - - 1 - - - - - - - - 1 AT0A-2788-21 POWER CABLE ASSY
- - - - - - 1 1 1 1 1 1 - - - - - - - - - - - - - 1 AT0A-2788-20 POWER CABLE ASSY
1 1 - - - - - - - - - - - - - - - - - - - - - - - 1 AT0A-2788-14 POWER CABLE ASSY
- - 1 1 1 1 - - - - - - - - - - - - - - - - - - - 1 AT0A-2788-13 POWER CABLE ASSY
445
ECN REV DESCRIPTION
A
RELEASED TO PRODUCTION 03-06-09 GLS/ALB
REVISIONS
DATE
APPR
- - - - - - - - - - - - - - - - - 1 1 - - - - - - 1 AT0A-2788-10 POWER CABLE ASSY
- - - - - - - - - - - - - - - - - - - 1 - - - - - 1 AT0A-2788-9 POWER CABLE ASSY
- - - - - - - - - - - - 1 - - - - - - - 1 1 - - - 1 AT0A-2788-8 POWER CABLE ASSY
- - - - - - - - - - - - - 1 - - - - - - - - - - - 1 AT0A-2788-6 POWER CABLE ASSY
- - - - - - - - - - - - - - 1 - - - - - - - 1 1 - 1 AT0A-2788-5 POWER CABLE ASSY
- - - - - - - - - - - - - - - 1 - - - - - - - - 1 1 AT0A-2788-4 POWER CABLE ASSY
ITEM PART NUMBER DESCRIPTION
QTY
QTY
AT1A-3571-26
QTY
AT1A-3571-25
QTY
AT1A-3571-24
QTY
AT1A-3571-23
QTY
AT1A-3571-22
QTY
AT1A-3571-21
QTY
AT1A-3571-20
QTY
AT1A-3571-19
QTY
AT1A-3571-18
QTY
AT1A-3571-17
QTY
AT1A-3571-16
QTY
AT1A-3571-15
QTY
AT1A-3571-14
QTY
AT1A-3571-13
QTY
AT1A-3571-12
QTY
AT1A-3571-11
QTY
AT1A-3571-10
QTY
AT1A-3571-9
QTY
AT1A-3571-8
QTY
AT1A-3571-7
QTY
AT1A-3571-6
QTY
AT1A-3571-5
QTY
AT1A-3571-4
QTY
AT1A-3571-2
AT1A-3571-1
Unless otherwise specified,
Dimensions: Inches
Bends: 90
Tolerances:
Angular 1°
2 Place Decimal .02
3 Place Decimal .005
T.I.R .005
√125 Micro Inches
GD&T Per ANSI Y14.5M
Comments:
Do Not Scale Drawing
Drawn
Checked
Project Eng
Material:
Finish:
Name
ALB
GLS
GLS
N/A
N/A
Date
2/10/2009
2/10/2009
2/10/2009
Title
Drawing No.
Size
E
Scale: 1:4
AccuTemp Products, Inc.
8415 N. Clinton Park
Fort Wayne, IN 46825
MODULE, VOLTAGE
WATTAGE PHASE
AT1A-3571
ECN: 445
Sheet 1 of 2
Rev
A
Page 7
12
SP8914-0905
Page 4
See Page 17 for break down
VOLTAGE - WATTAGE - PHASE
6
PLEASE NOTE ORIENTATION,
BOTH PARTS ARE MOUNTED
IN THE SAME DIRECTION
9
1
1
2
4
2
11
7
8
3
4
STEAMER CONFIGURATION
GROUPS 1,2,4-14, 21-26
5
10
3
CONFIGURATION GROUPS 15-20
OTHERWISE SAME AS GROUPS 1,2,4-14, 21-26
Unless otherwise specified,
Dimensions: Inches
Bends: 90
Tolerances:
Angular 1°
2 Place Decimal .02
3 Place Decimal .005
T.I.R .005
√125 Micro Inches
GD&T Per ANSI Y14.5M
Comments:
Do Not Scale Drawing
Drawn
Checked
Project Eng
Material:
Finish:
Name
ALB
GLS
GLS
N/A
N/A
Date
2/10/2009
2/10/2009
2/10/2009
Title
Drawing No.
Size
E
Scale: 1:2
AccuTemp Products, Inc.
8415 N. Clinton Park
Fort Wayne, IN 46825
MODULE, VOLTAGE
WATTAGE PHASE
AT1A-3571
ECN: 445
Sheet 2 of 2
Rev
A
Page 8
NOTES:
SP8914-0905
Page 5
COMMON COMPONENTS ASSEMBLY
SEE AT1A-3570 BOM, 6 PAN FINAL FOR CAST IN HEATER1.
DESIGN, COMPONENT AND MODULE ASSEMBLY ORIENTATIONS.
2
3
SEE AT1A-3572 MODULE, VOLTAGE WATTAGE PHASE FOR COMPONENT DETAILS.
TORQUE ITEM 72 (AT0F-3401-1) SPECIAL LOCKING NUT TO 25±2 IN-LBS, STARTING IN THE CENTER
AND WORKING FIRST TO THE SIDES (SIDES OF STEAMER CHAMBER) AND THEN TO THE ENDS
(FRONT AND BACK OF STEAMER CHAMBER) OF THE HEATER. TIGHTEN TWICE IN THIS MANNER.
4
5
HEATING ELEMENTS ARE NUMBERED ONE TO THREE, FROM THE BACK TO THE FRONT OF THE STEAMER.
APPLY THIN FILM OF ITEM 60 (AT0H-3412-1) WAKEFIELD 120 THERMAL JOINT COMPOUND TO THE BOTTOM
OF ITEM 33 (AT1E-2653-3) OVERTEMP SWITCH.
6
APPLY ITEM 61 (AT0H-3065-3) LOCTITE 248 ONLY TO THE THREADS OF ITEM 33 (AT1E-2653-3) OVERTEMP SWITCH.
4 4 4 4 70 AT0F-2691-21002 NUT, #6-32 NYLOC
2 2 2 2 69 AT0F-2778-11002 NUT, #4-40UNC-2B SS HEX MACHINE SCREW
- 1 - 1 68 AT0F-2778-21001 NUT, #6-32UNC-2B SS HEX MACHINE SCREW
7
8
PLACE ITEM 46 (AT1A-3387-1) STEAMER LOOSE PIECES INTO EMPTY, DRY CHAMBER FOR SHIPPING.
TORQUE ITEM 59 (AT1E-2652-1) WATER SENSOR PROBE NUTS TO 12-15 IN-LBS.
DO NOT EXCEED 15 IN-LBS AS THIS WILL STRIP THE THREADS.
9
APPLY ITEM 37 (AT0H-3102-1) THREAD SEALANT ON CUSTOM PIPE NIPPLE (AT1P-2476-1) ON ITEM 1 (AT1A-3573)
CHAMBER WELD ASSEMBLYBEFORE SECURELY MOUNTING ITEM 39 (AT1P-2239-1) BALL VALVE.
10
APPLY ITEM 38 (AT1L-2624-1) LABEL TO ITEM 3 (AT1A-3409) BOTTOM SHELL APPROXIMATELY
.25" FROM THE CONTROL PANEL SIDE AND 9.00" BACK FROM THE FRONT. ORIENT THE LABEL
SO THAT THE TEXT CAN BE READ FROM THE LEFT SIDE OF THE STEAMER IN ITS NORMAL UPRIGHT POSITION.
- 2 - 2 67 AT0F-2773-31030 SCREW, PHILLIPS ROUND HEAD #8 TYPE F X 3/8"
8 8 - - 66 AT0F-3480-41080 SCREW, #10-24 x 1" DRL SPAN FLT HD MACH
- - 8 8 66 AT0F-2061-41080 SCREW, #10-24 x 1" FLAT HD MACHINE
15 15 - - 65 AT0F-2451-32036 SCREW, #8 TYPE AB X 3/8 DRL SPAN PAN HD
- - 15 15 65 AT0F-2777-31030 SCREW, #8 TYPE AB X 3/8 TRUSS HD
8 8 - - 64 AT0F-3448-41036 SCREW, #10-24x3/8" DRL SPAN PAN HD MACH
- - 8 8 64 AT0F-1046-41030 SCREW, #10-24 x 3/8 PHLP TRUSS HEAD
3 7 - - 63 AT0F-3448-31036 SCREW, #8-32x3/8" DRL SPAN PAN HD MACH
- - 2 6 63 AT0F-1046-31030 SCREW, #8-32 x 3/8 PHLP TRUSS HEAD
2 2 2 2 62 AT0F-2755-41042 SCREW, #10-24UNC X 1/2 PHILIPS ROUND HEAD MACHINE
1 1 1 1 61 AT0H-3065-3 THREAD LOCKER 248
1 1 1 1 60 AT0H-3412-1 WAKEFIELD 120 THERMAL JOINT COMPOUND
2 2 2 2 59 AT1E-2652-1 PROBE, WATER SENSOR
11
SEE AT1A-3571 MODULE, VOLTAGE WATTAGE PHASE FOR COMPONENT DETAILS.
- 4 - 4 58 AT0P-2714-3 3/4" ID HOSE CLAMP
2 2 2 2 57 AT0P-2714-2 1/2" ID HOSE CLAMP
4 4 4 4 56 AT0P-2714-1 1/4" ID HOSE CLAMP
- 1 - 1 55 AT0P-3477-80022 HOSE, SILICONE, BRAIDED REINFORCED 3/4" IDx10 1/4" LG
- 1 - 1 54 AT0P-3477-80153 HOSE, SILICONE, BRAIDED REINFORCED 3/4" IDx10 1/4" LG
1 1 1 1 53 AT1P-2558 SILICONE HOSE, 1/4"Øx9" LG
1 1 1 1 52 AT0P-2555-10012 SILICONE HOSE
1 - 1 - 51 AT0P-2841-1 HEX HEAD PLUG CORED
- 1 - 1 50 AT0P-3430-1 FITTING, GARDEN HOSE TO NTPF
- 1 - 1 49 AT0P-3512-1 NIPPLE, CLOSE, BRASS-1/4" NPT
- 1 - 1 48 AT0P-3518-1 MALE ELBOW, 1/4" TUBE TO 1/4" NPTM
- 1 - 1 47 AT1M-3510-1 BRACKET, WATER CONTROL VALVE
1 1 1 1 46 AT1A-3387-1 LOOSE PIECES, STEAMER
1 - 1 - 45 AT0P-3613-2 BUSHING, 3/8 NPT X 1/4NPT HEX
1 1 1 1 44 AT1L-2866-31 INSULATION, BACK TOP
1 1 1 1 43 AT0E-3626-1 TEMPERATURE SENSOR, RTD
1 1 1 1 42 AT0P-3616-1 ELBOW, 90° HOSE BARB 1/2 X 1/4
- 1 - 1 41 AT0P-3233-1 FLOAT, ROUND
1 1 1 1 40 AT1L-3357-1 LABEL, SERIAL NUMBER DATA
1 1 1 1 39 AT1P-2239-1 BALL VALVE
1 1 1 1 38 AT1L-2624-1 LABEL STEAMER LEGS
5 5 5 7 37 AT0H-3102-1 PIPE THREAD SEALANT
1 1 1 1 36 AT1M-3348-1 COVER, STEAMER DRAIN
1 1 1 1 35 AT1L-3369-1 LABEL, SERIAL NUMBER
2 2 2 2 34 AT1M-2573-3 DRIP EDGE
1 1 1 1 33 AT1E-2653-3 OVERTEMP SWITCH
1 1 1 1 98 AT0P-3613-1 BUSHING, 1/2 NPT X 1/4NPT HEX
2 2 2 2 97 AT0F-2691-41011 NUT, #10-24 WAXED NYLOC
1 1 1 1 96 AT1M-3291-1 HANDLE BALL VALVE
- 1 - 1 95 AT1L-3665-1 LABEL, WATER BACKFLOW
1 1 1 1 94 AT1A-3663-1 ENCLOSURE, STEAM COLLECTOR ASSEMBLY
1 1 1 1 93 AT1L-3658-1 OVERLAY, STEAMER OPERATING INSTRUCTIONS
1 1 1 1 92 AT0A-3660-1 SENSOR MAGNETIC PROXIMITY ASSEMBLY
1 1 1 1 91 AT0L-3659-1 OVERLAY, ACCUTEMP LOGO
1 1 1 1 90 AT0P-2555-60122 SILICONE HOSE
1 1 1 1 32 AT1I-2866-27 INSULATION, BACK WALLS
1 1 1 1 31 AT1I-2866-23 INSULATION, RIGHT SIDE
1 1 1 1 30 AT1I-2866-29 INSULATION, LEFT SIDE WALLS
1 1 1 1 29 AT1I-2866-28 INSULATION, TOP
1 1 1 1 28 AT1I-2866-26 INSULATION, BOTTOM BACK
1 1 1 1 27 AT1I-2866-25 INSULATION, BOTTOM MIDDLE
1 1 1 1 26 AT1I-2866-24 INSULATION, BOTTOM FRONT
3 3 3 3 25 AT0E-1800-5 INDICATOR LAMP RED NEON 250V
1 1 1 1 24 AT1M-3607-1 BRACKET, INDICATOR LAMP
2 2 2 2 23 AT0H-3623-2 SPACER, ROUND CLEAR HOLE
7 7 7 7 22 AT0H-3623-1 SPACER, ROUND CLEAR HOLE
- 1 - 1 21 AT0P-3481-1 ELBOW, 90º NPT TO BEADED HOSE BARB
- 1 - 1 20 AT0P-2618-4 FITTING, 3/8" NPT TO 3/4" HOSE BARB
1 1 1 1 89 AT0E-3617-1 SWITCH, AIR PRESSURE
1 1 1 1 88 AT0A-3605-1 STEAMER WIRING HARNESS ATMOSPHERIC
1 1 1 1 87 AT0E-3625-1 CONTROLLER, QUANTEM SERIES 130
1 1 1 1 86 AT1A-3667-1 DISTRIBUTION PANEL ASSEMBLY
- 1 - 1 85 AT0P-2987-3 BARBED TEE FITTING, 3/4 X 3/4 X 3/4
- 1 - 1 84 AT0A-3519-2 REED SWITCH WIRING HARNESS
2 2 2 2 83 AT1A-3601-1 WIRE RACK ASSEMBLY
1 1 1 1 82 AT0P-3615-2 90° STREET ELBOW 3/4 NPT
1 1 1 1 81 AT0P-3615-1 90° STREET ELBOW 1/2 NPT
1 1 1 1 80 AT1L-3608-1 OVERLAY, STEAMER CONTROL PANEL
1 - 1 - 79 AT0H-3643-1 PLUG, DOME
2 2 2 2 78 AT0F-1052-41002 WASHER #10 TYPE B PLAIN
16 16 16 16 77 AT0F-3405-1 WASHER, FENDER
- 1 - 1 19 AT1M-3521-2 TRAY, CONDENSATE
1 1 1 1 18 AT0P-3614-1 BULLHEAD TEE 1/2 X 3/4 X 1/2 NPT
1 1 1 1 17 AT0P-2628-1 FITTING, 90° ELBOW, 1/4" NPTM TO 1/4" HOSE BARB
1 1 1 1 16 AT0P-1456-3 FITTING FEMALE 3/8 NPT x 1/4 BARB
- 1 - 1 15 AT0P-3509-2 SOLENOID VALVE, 1/4"-24VAC
- 1 - 1 14 AT0P-3504-40060 TUBING, PVDF, 1/4" OD x 10 3/4" LONG
- 1 - 1 13 AT0P-3495-2 MALE CONNECTOR, 1/4" TUBE TO 1/8" NPTM
1 1 1 1 12 AT0S-3398-1 ENVELOPE, CLEAR
- 1 - 1 11 AT0P-3499-1 FILTER, INLET
- 1 - 1 10 AT0P-3498-1 WASHER, GARDEN HOSE
- 1 - 1 9 AT0P-3497-1 CAP, 3/4" GARDEN HOSE
1 1 1 1 8 AT1A-3590-1 COMPONENT BRACKET ASSY
1 1 1 1 7 AT1A-3610-1 HEATER MOUNTING BRACKET ASSY
24 24 24 24 76 AT0F-2663-2 WASHER, Ø.937 OD BELLEVILLE
7 8 7 8 75 AT0F-2666-21002 WASHER, #6 EXTERNAL TOOTH LOCK
4 4 4 4 74 AT0F-2632-50001 NUT, ¼- 20 ACORN
1 1 1 1 73 AT0P-3622-1 NUT, PIPE LOCK
24 24 24 24 72 AT0F-3401-1 NUT, SPECIAL LOCKING 1/4-20UNC-2B
7 7 7 7 71 AT0F-3621-1 NUT, #6-32UNC-2B UNDERSIZE MACHINE SCREW HEX
ITEM PART NUMBER DESCRIPTION
QTY AT1A-3572-4
QTY AT1A-3572-3
QTY AT1A-3572-2
QTY AT1A-3572-1
1 1 1 1 6 AT1A-3610-2 HEATER MOUNTING BRACKET ASSY
1 1 1 1 5 AT1M-3588-2 PANEL, BACK
2 2 2 2 4 AT1M-3587-1 PANEL, SIDE
1 1 1 1 3 AT1A-3596-1 PANEL, BOTTOM ASSEMBLY
1 1 1 1 2 AT1A-3629-1 ASSEMBLY, TOP PANEL
1 1 1 1 1 AT2A-3573-1 CHAMBER WELD ASSEMBLY
ITEM PART NUMBER DESCRIPTION
QTY AT1A-3572-4
QTY AT1A-3572-3
QTY AT1A-3572-2
QTY AT1A-3572-1
445 RELEASED TO PRODUCTIONA GLS/ALB04-10-09
ECN
REV
APPRDATEDESCRIPTION
REVISIONS
Unless otherwise specified,
Dimensions: Inches
Bends: 90
Tolerances:
Angular 1°
2 Place Decimal .02
3 Place Decimal .005
T.I.R .005
√125 Micro Inches
GD&T Per ANSI Y14.5M
Do Not Scale Drawing
Drawn
Checked
Project Eng
Material:
Finish:Comments:
Name
ALB
DPS
DPS
N/A
N/A
Date
11/24/2008
11/24/2008
11/24/2008
AccuTemp Products, Inc.
8415 N. Clinton Park
Fort Wayne, IN 46825
Title
MODULE 6 PAN
COMMON COMPONENTS
Drawing No.
Size
E
Scale: 1:4
AT1A-3572
ECN: 445
Rev
B
Sheet 1 of 5
Page 9
32
SP8914-0905
Page 6
CAST HEATER ASSEMBLY
INSULATION ASSEMBLY
COMMON COMPONENT ASSEMBLY
29
31
44
4
5
60
4
4
PIN 1
6
61
PIN 3
PIN 2
33
11
76
62
77
7
75
6
30
28
27
26
71
3
AT1A-3572-1 THRU -4
SOME COMPONENTS REMOVE FOR CLARITY
Unless otherwise specified,
Dimensions: Inches
Bends: 90
Tolerances:
Angular 1°
2 Place Decimal .02
3 Place Decimal .005
T.I.R .005
√125 Micro Inches
GD&T Per ANSI Y14.5M
Comments:
Do Not Scale Drawing
Drawn
Checked
Project Eng
Material:
Finish:
Name Date
ALB
DPS
DPS
N/A
N/A
11/24/2008
11/24/2008
11/24/2008
AccuTemp Products, Inc.
8415 N. Clinton Park
Fort Wayne, IN 46825
Title
MODULE 6 PAN
COMMON COMPONENTS
Drawing No.Size
E
Scale: 1:4
AT1A-3572
ECN: 445
Rev
B
Sheet 2 of 5
Page 10
37
SP8914-0905
Page 7
COMMPN CONPONENTS ASSEMBLY
5
65
5
81
37
80
18
97
2
4
1
37
94
63
73
66
56
53
17
37
69
56
52
88
56
42
68
92
90
98
91
12
9
10
11
50
49
37
15
47
48
37
37
13
14
89
57
57
22
?
70
74
86
64
?
98
79
43
56
16
72
7
24
23
25
6
?
83
67
34
36
95
63
65
19
4
65
AT1A-3572-1
AT1A-3572-3
8
3
37
65
35
20
38
58
55
58
84
58
54
58
21
39
37
37
Unless otherwise specified,
Dimensions: Inches
Bends: 90
Tolerances:
Angular 1°
2 Place Decimal .02
3 Place Decimal .005
T.I.R .005
√125 Micro Inches
GD&T Per ANSI Y14.5M
Comments:
Do Not Scale Drawing
Drawn
Checked
Project Eng
Material:
Finish:
Name Date
ALB
DPS
DPS
N/A
N/A
11/24/2008
11/24/2008
11/24/2008
AccuTemp Products, Inc.
8415 N. Clinton Park
Fort Wayne, IN 46825
Title
MODULE 6 PAN
COMMON COMPONENTS
Drawing No.Size
E
Scale: 1:3
AT1A-3572
ECN: 445
Rev
B
Sheet 3 of 5
Page 11
65
SP8914-0905AT1A-3570 - REV-A
Page 8
SEE PAGE 12 FOR BREAK DOWN
COMMON COMPONENTS ASSEMBLY
5
37
82
74
37
81
18
98
37
70
2
1
4
89
12
79
65
17
56
37
57
42
52
56
56
71
69
91
66
92
56
16
90
57
37
51
87
75
64
?
?
66
43
80
22
73
8
24
23
25
96
34
39
37
65
63
35
65
3
4
65
AT1A-3572-2
AT1A-3572-4
37
45
38
Unless otherwise specified,
Dimensions: Inches
Bends: 90
Tolerances:
Angular 1°
2 Place Decimal .02
3 Place Decimal .005
T.I.R .005
√125 Micro Inches
GD&T Per ANSI Y14.5M
Comments:
Do Not Scale Drawing
Drawn
Checked
Project Eng
Material:
Finish:
Name Date
ALB
DPS
DPS
N/A
N/A
11/24/2008
11/24/2008
11/24/2008
AccuTemp Products, Inc.
8415 N. Clinton Park
Fort Wayne, IN 46825
Title
MODULE 6 PAN
COMMON COMPONENTS
Drawing No.Size
E
Scale: 1:3
AT1A-3572
ECN: 445
Rev
B
Sheet 4 of 5
Page 12
82
SP8914-0905AT1A-3570 - REV-A
Page 9
COMMON COMPONENT ASSEMBLY
85
8
41
59
93
Unless otherwise specified,
Dimensions: Inches
Bends: 90
Tolerances:
Angular 1°
2 Place Decimal .02
3 Place Decimal .005
T.I.R .005
√125 Micro Inches
GD&T Per ANSI Y14.5M
Comments:
Do Not Scale Drawing
Drawn
Checked
Project Eng
Material:
Finish:
Name Date
ALB
DPS
DPS
N/A
N/A
11/24/2008
11/24/2008
11/24/2008
AccuTemp Products, Inc.
8415 N. Clinton Park
Fort Wayne, IN 46825
Title
MODULE 6 PAN
COMMON COMPONENTS
Drawing No.Size
E
Scale: 1:4
AT1A-3572
ECN: 445
Rev
B
Sheet 5 of 5
Page 13
14
SP8914-0905
Page 10
COMPONENT BRAKET ASSEMBLY
7
12
15
15
11
8
6
5
2
3
12
16
1
13
12
4
9
10
AT1A-3590-1
17
1 17 AT0E-3654-1 ALARM, PIEZO ELECTRIC
1 16 AT0E-2825-5 GENERAL PURPOSE RELAY 24VAC
3 15 AT0F-2666-40000 WASHER, #10 INTERNAL TOOTH LOCK
2 14 AT0F-2778-41002 NUT, #10-24 UNC-2B HEX MACHINE SCREW
6 13 AT0F-3620-40010 SCREW, PHILLIPS PAN HEAD #10-32 X 3/8" TAPTITE 2
6 12 AT0F-3620-21052 SCREW, PHILLIPS PAN HEAD #6-32 x 5/8" TAPTITE 2
1 11 AT0F-2755-41042 SCREW, #10-24UNC X 1/2 PHILIPS ROUND HEAD MACHINE
4 10 AT0H-3407-1 C B SUPPORT, REVERSE MT'G.
1 9 AT0E-3230-2 PCB, DUAL PURPOSE WATER SENSOR
1 8 AT0E-2662-5 TRANSFORMER
1 7 AT0E-1587-4 3 POLE CONTACTOR
1 6 AT0E-2731-1 FUSE 3 AMP 250V
1 5 AT0E-3162-1 FUSE ½ AMP 250V FAST ACTING
1 4 AT0E-2708-1 3AG OMNI-BLOK FUSE BLOCK 2 POS
1
3
MARKER STRIP BARRIER BLOCK 6 POSAT0E-3062-3
6 POSITION TERMINAL BLOCKAT0E-1134-621
COMPONENT BRACKETAT1M-3591-111
445 A RELEASED TO PRODUCTION 03-06-09 GLS/ALB
ECN REV DESCRIPTION DATE APPR
REVISIONS
QTY
ITEM PART NUMBER DESCRIPTION
AT0A-3590-1
Unless otherwise specified,
Dimensions: Inches
Bends: 90
Tolerances:
Angular 1°
2 Place Decimal .02
3 Place Decimal .005
T.I.R .005
√125 Micro Inches
GD&T Per ANSI Y14.5M
Comments:
Do Not Scale Drawing
Drawn
Checked
Project Eng
Material:
Finish:
Name Date
ALB
GLS
GLS
N/A
N/A
1/12/2009
1/12/2009
1/12/2009
AccuTemp Products, Inc.
8415 N. Clinton Park
Fort Wayne, IN 46825
Title:
COMPONENT BRACKET
ASSEMBLY STEAMER
D
Drawing No.:
AT1A-3590
ECN: 445Scale: 1:2
Size:
Rev.
A
Sheet 1 of 1
Page 14
1
SP8914-0905
Page 11
DOOR ASSEMBLY CONFIGURATIONS
1
1
1
2
4
3
AT1A-3600-1
1
AT1A-3600-2
OTHERWISE SAME AS AT1A-3600-1
2
5
3
AT1A-3600-4
1
AT1A-3600-6
OTHERWISE SAME AS AT1A-3600-4
7
11
8
10
9
11
6
7
11
8
10
9
11
6
- 4 - 4 - - 11 AT0F-2061-41080 SCREW, #10-24 x 1" FLAT HD MACHINE
- 4 - 4 - - 10 AT0F-2061-21020 SCREW, #6-32 X ¼" FLAT HEAD MACHINE
- 1 - 1 - - 9 AT0H-3443-3 CATCH, BALL-STYLE GRAB
- 1 - 1 - - 8 AT0H-3443-2 CATCH, BALL-STYLE GRAB
- 1 - 1 - - 7 AT1M-3670-1 PLATE, HOLD OPEN FRONT
- 1 - 1 - - 6 AT1M-3671-1 PLATE, HOLD OPEN DOOR
1 1 1 - - - 5 AT1A-3442-2 CRACK OPEN HINGE ASSEMBLY
- - - 1 1 1 4 AT1H-2432-J SHIM
1 1 1 1 1 1 3 AT1H-2432-H STRIKE
2 2 2 2 2 2 2 AT1M-3655-1 SPACER HINGE
REVISIONS
2
- 1 - 1 - - 1 AT1A-3645-3 DOOR ASSEMBLY
1 - - - 1 - 1 AT1A-3646-2 DOOR ASSEMBLY
- - 1 - - 1 1 AT1A-3645-1 DOOR ASSEMBLY
4
3
2
5
3
ITEM PART NUMBER DESCRIPTION
QTY
QTY
QTY
QTY
QTY
QTY
AT1A-3600-5
AT1A-3600-3
LRW/ALB03-31-09RELEASAED TO PRODUCTIONA445
APPRDATEDESCRIPTIONREVECN
AT1A-3600-6
AT1A-3600-5
AT1A-3600-4
AT1A-3600-3
AT1A-3600-2
AT1A-3600-1
Unless otherwise specified,
Dimensions: Inches
Bends: 90
Tolerances:
Angular 1°
2 Place Decimal .02
3 Place Decimal .005
T.I.R .005
√125 Micro Inches
GD&T Per ANSI Y14.5M
Comments:
Do Not Scale Drawing
Drawn
Checked
Project Eng
Material:
Finish:
Name Date
ALB
LRW
ALB
N/A
N/A
3/31/2009
3/31/2009
3/31/2009
Title:
Size:
Drawing No.:
D
Scale: 1:4
AccuTemp Products, Inc.
8415 N. Clinton Park
Fort Wayne, IN 46825
MODULE, DOOR
CONFIGURATION
AT1A-3600
ECN: 445
Rev.
A
Sheet 1 of 1
Page 15
1
SP8914-0905
Page 12
Door Assembly
2
REVISIONS
1 1 1 2 AT1A-3647-1 INNER DOOR ASSEMBLY
1 - - 1 AT1A-3646-3 OUTTER DOOR ASSEMBLY
AT1A-3645-1
- 1 - 1 AT1A-3646-2 OUTTER DOOR ASSEMBLY
AT1A-3645-2
AT1A-3645-3
03-06-09RELEASED TO PRODUCTIONA445
LRW/ALB
APPRDATEDESCRIPTIONREVECN
- - 1 1 AT1A-3646-1 OUTTER DOOR ASSEMBLY
ITEM PART NUMBER DESCRIPTION
QTY
AT1A-3645-3
QTY
AT1A-3645-2
Unless otherwise specified,
Dimensions: Inches
Bends: 90
Tolerances:
Angular 1°
2 Place Decimal .02
3 Place Decimal .005
T.I.R .005
√125 Micro Inches
GD&T Per ANSI Y14.5M
QTY
AT1A-3645-1
Do Not Scale Drawing
Drawn
Checked
Project Eng
Material:
Finish:Comments:
Name
ALB
LRW
LRW
N/A
N/A
Date
2/28/2009
2/28/2009
2/28/2009
Title:
Drawing No.:
Size:
C
Scale: 1:4
AccuTemp Products, Inc.
8415 N. Clinton Park
Fort Wayne, IN 46825
DOOR ASSEMBLY
AT1A-3645
ECN: 445
Sheet 1 of 1
Rev.
A
Page 16
NOTE:
SP8914-0905
Page 13
OUTER DOOR ASSEMBLY
4
2
7
4
1
2
APPLY ITEM #9 ON ITEM #6 BEFORE ANY ASSEMBLY.
REMOVE ITEM #4 COVER FOR AT1A-2428-2
1
9
6
1
DETAIL A
SCALE 1 : 1
5
69
7
7
AR AR AR 9 AT0H-3065-3 THREAD LOCKER 248
2
3 3 3 8 AT0F-2691-41011 NUT, #10-24 WAXED NYLOC
- 5 - 7 AT0F-3480-41166 SCREW, #10-24 x 2" DRL SPAN FLT HD MACH
5 - 5 7 AT0F-2061-41140 SCREW, #10-24 x 1¾" FLAT HD MACHINE
- 4 - 6 AT0F-3480-41066 SCREW, #10-24 x 3/4" DRL SPAN FLT HD MACH
DESCRIPTION APPRREV DATEECN
REVISIONS
4 - 4 6 AT0F-2061-41060 SCREW, #10-24 x ¾" FLAT HD MACHINE
1 1 1 5 AT1H-3609-1 LATCH HANDLE ASSEMBLY
2 2 2 4 AT1H-2058-3 HINGE, STEAMER DOOR
8
3
1 1 1 3 AT1M-3046-1 LATCH MOUNTING PLATE RIGHT HAND
2 2 2 2 AT1M-2689-1 HINGE MOUNTING PLATE
1 - - 1 AT1M-3648-2 OUTER DOOR PANEL
- 1 1 1 AT1M-3648-1 OUTER DOOR PANEL
AT1A-3646-1
QTY
QTY
QTY
ITEM PART NUMBER DESCRIPTION
AT1A-3646-2
AT1A-3646-3
LRW/ALBA 03-06-09445 RELEASED TO PRODUCTION
AT1A-3646-3
AT1A-3646-2
AT1A-3646-1
Unless otherwise specified,
Dimensions: Inches
Bends: 90
Tolerances:
Angular 1°
2 Place Decimal .02
3 Place Decimal .005
T.I.R .005
√125 Micro Inches
GD&T Per ANSI Y14.5M
Comments:
Do Not Scale Drawing
Drawn
Checked
Project Eng
Material:
Finish:
Name Date
ALB
LRW
LRW
N/A
N/A
2/27/2009
2/27/2009
2/27/2009
Title:
Size:
Drawing No.:
D
Scale: 1:2
AccuTemp Products, Inc.
8415 N. Clinton Park
Fort Wayne, IN 46825
OUTTER DOOR
ASSEMBLY
AT1A-3646
ECN: 445
Rev.
A
Sheet 1 of 1
Page 17
10
Page 14
SP8914-0905AT1A-3570 - REV-A
Page 14
INNER DOOR ASSEMBLY
7
2
10
5
6
2
11
5
8
10
11
8
6
9
8 12 AT0F-3368-2 BLIND RIVET
6 11 AT0F-1052-51002 WASHER 1/4 TYPE B PLAIN
18 10 AT0F-2691-41011 NUT, #10-24 WAXED NYLOC
12
10
7
3
AT1A-3647-1
2
1
10
1 9 AT1G-2633-1 INNER DOOR GASKET (6 PAN)
2 8 AT1M-3507-1 RETAINER, SIDE SMALL DOOR GASKET
2 7 AT1M-3652-1 RETAINER, DOOR GASKET
2 6 AT1M-3524-1 RETAINER, SIDE DOOR GASKET
4 5 AT1M-3653-1 SPRING, INNER DOOR
1 4 AT1M-3466-2 BRACKET, DOOR
1 3 AT1M-3466-1 BRACKET, DOOR
3 2 AT1M-3651-1 Z BRACKET, INNER DOOR
1 1 AT1A-3649-1 PANEL, INNER DOOR WELDMENT
ITEM PART NUMBER DESCRIPTION
QTY
LRW/ALB03-06-09RELEASED TO PRODUCTIONA445
REVISIONS
AT1A-3647-1
Unless otherwise specified,
Dimensions: Inches
Bends: 90
Tolerances:
Angular 1°
2 Place Decimal .02
3 Place Decimal .005
T.I.R .005
√125 Micro Inches
GD&T Per ANSI Y14.5M
Comments:
APPRDATEDESCRIPTIONREVECN
Do Not Scale Drawing
Drawn
Checked
Project Eng
Material:
Finish:
Name Date
ALB
LRW
LRW
N/A
N/A
2/27/2009
2/27/2009
2/27/2009
Title:
Size:
Drawing No.:
D
Scale: 1:2
AccuTemp Products, Inc.
8415 N. Clinton Park
Fort Wayne, IN 46825
INNER DOOR
ASSEMBLY
AT1A-3647
ECN: 445
Rev.
A
Sheet 1 of 1
Page 18
NOTES:
SP8914-0905
Page 15
RELAY ASSEMBLY
1. ITEM 9, PAD, SSR HEAT SINK CAN BE SUBSTITUTED WITH HEAT SINK COMPOUND
A
10
11
8
9
5
2
TIMER
TERMINAL #2
THERMOSTAT
TERMINAL #5
RELAY CR3
TERMINAL #6
TIMER
TERMINAL #2
THERMOSTAT
TERMINAL #5
TIMER
TERMINAL #2
A
6
2
RELAY CR3
TERMINAL #6
4
2
7
2
THERMOSTAT
TERMINAL #5
A
1
AT1A-2511-1
A
SSR2
A
SSR1
3
AT1A-2511-2
OTHERWISE SAME AS AT1A-2511-1
A
SSR3
A
SSR2
A
SSR1
RELAY CR3
TERMINAL #6
AT1A-2511-3
OTHERWISE SAME AS AT1A-2511-1
SSR 3
SSR 2
13
SSR 1
PRESSURE
SWITCH
4
PRESSURE
SWITCH
7
TIMER
TERMINAL #2
THERMOSTAT
TERMINAL #5
RELAY CR3
TERMINAL #6
1 - - - AT0A-1454-8 13 WIRE HARNESS ASSY
1 - - - AT0A-1454-7 12 WIRE HARNESS ASSY
6 6 4 2 AT0F-2666-30000 11 WASHER, #8 INTERNAL TOOTH LOCK
6 6 4 2 AT0F-2755-31030 10 SCREW, #8-32UNC X 3/8 PHILIPS ROUND HEAD MACHINE
3 3 2 1 AT0E-2996-1 9 PAD, SSR HEAT SINK
3 3 2 1 AT0E-2059-3 8 RELAY, SOLID STATE
1 1 - - AT0A-1454-6 7 WIRE HARNESS ASSY, TRIPLE SSR ORANGE
- - 1 - AT0A-1454-5 6 WIRE HARNESS ASSY, DOUBLE SSR ORANGE
- - - 1 AT0A-1454-4 5 WIRE HARNESS ASSY, SINGLE SSR ORANGE
1 1 - - AT0A-1454-3 4 WIRE HARNESS ASSY, TRIPLE SSR WHT/BRN
- - 1 - AT0A-1454-2 3 WIRE HARNESS ASSY, DOUBLE SSR WHT/BRN
- 1 1 1 AT0A-1454-1 2 WIRE HARNESS ASSY, ALL SSR WHT/BRN
1 1 - - AT0E-2206-2 1 HEAT SINK, 10.50" LONG
- - 1 1 AT0E-2206-1 1 HEAT SINK, 7.00" LONG
CHG'D: (AT1A-2511-1 & -2) TIMER TERMINAL
340 D
325 C ADDED: AT1A-2511-5 02-09-07 LRW/ALB
281 B UPDATED PICTORIALLY 08-22-06 GLS/ALB
220 A
ECN REV DESCRIPTION DATE APPR
#2 WAS THERMOSTAT TERMINAL #5;
THERMOSTAT TERMINAL #5 WAS
THERMOSTAT TERMINAL #4
CHG’D: (AT1A-2511-1) MNTG LOCATION OF ITM
8 AT0E-2059-3 SSR ON ITM 1 AT0E-2206-1,
ADDED, 31" LONG, 12" LONG, SSR1, SSR2,
SSR3, THIS SURFACE UP
REVISIONS
05-08-07 GLS/ALB
04-22-05 RP/ALB
C
AT1A-2511-5
OTHERWISE SAME AS AT1A-2511-1
12
PART NO. ITEM DESCRIPTION
QTY AT1A-2511-5
C
QTY AT1A-2511-3
QTY AT1A-2511-2
QTY AT1A-2511-1
Unless otherwise specified,
Dimensions: Inches
Bends: 90
Tolerances:
Angular 1°
2 Place Decimal .02
3 Place Decimal .005
T.I.R .005
√125 Micro Inches
GD&T Per ANSI Y14.5M
Comments:
Do Not Scale Drawing
Drawn
Checked
Project Eng
Material:
Finish:
Name
ATP 3-22-05
3-22-05GLS
GLS 3-22-05
N/A
N/A
Date
Title:
D
Scale: 1:1.5
AccuTemp Products, Inc.
8415 N. Clinton Park
Fort Wayne, IN 46825
HEAT SINK ASSY
AT1A-2511
EDR: 088
Sheet 1 of 1
Rev.Drawing No.:Size:
D
Page 19
NOTES:
SP8914-0905
Page 16
LEG ASSEMBLY
1
PACK ITEM #8 INTO THE BAG SHOWN ON AT1A-3387.
AT1A-3500-1
5
4
1
6
6
7
7
AT1A-3500-3
3
6
7
8
2
1
3
8
6
7
2
1
4 - 4 - AT0H-3040-1 8 RUBBER BULLET FOOT TIP
8 - - - AT0F-3448-51056 7 SCREW, 1/4-20x5/8" DRL SPAN PAN HD MACH
AT1A-3500-2
AT1A-3500-4
- 8 8 4 AT0F-2875-51050 7 SCREW, 1/4-20UNC X 5/8 HEX HEAD MACHINE
8 8 8 4 AT0F-1922-50000 6 WASHER, 1/4" HELICAL SPRING LOCK
- 1 - - AT1A-3038-5 5 LEG BASE FLANGE LEFT ASSEMBLY
- 1 - - AT1A-3038-4 4 LEG BASE FLANGE RIGHT ASSEMBLY
1 - 1 - AT1A-3038-2 3 LEG BASE LEFT ASSEMBLY
1 - 1
- 2AT1A-3038-1
LEG BASE RIGHT ASSEMBLY
- - - 2 AT1M-2872-1 1 DRAIN PAN BRACKET
PART NUMBER ITEM DESCRIPTION
QTY
QTY
QTY
QTY
445 A RELEASED TO PRODUCTION 03-06-09 GLS/ALB
ECN REV DESCRIPTION DATE APPR
REVISIONS
AT1A-3500-4
AT1A-3500-3
AT1A-3500-2
AT1A-3500-1
Unless otherwise specified,
Dimensions: Inches
Bends: 90
Tolerances:
Angular 1°
2 Place Decimal .02
3 Place Decimal .005
T.I.R .005
√125 Micro Inches
GD&T Per ANSI Y14.5M
Comments:
Do Not Scale Drawing
Drawn
Checked
Project Eng
Material:
Finish:
Name Date
ALB
GLS
GLS
N/A
N/A
10/25/2007
10/25/2007
10/25/2007
Title:
Size:
Drawing No.:
D
Scale: 1:4
AccuTemp Products, Inc.
8415 N. Clinton Park
Fort Wayne, IN 46825
MODULE,
LEG CONFIGURATION
AT1A-3500
ECN: 445
Sheet 1 of 1
Rev.
A
Page 20
PART NUMBER RATED VOLTAGE / WATTAGE
SP8914-0905
Page 17
C
AST HEATER KIT
AT1A-3530-1 208V 6.0KW 230V 7.3KW 240V 8.0KW 380V 6.7KW 400V 7.4KW 415V 8.0KW 440V 9.0KW 480V 10.7KW
AT1A-3530-2 240V 6.0KW
NOTES:
1
PLACE ITEMS 2 THRU 6 INTO ITEM 7.
AT1A-3530-3 208V 8.0KW 240V 10.7KW 380V 9.0KW 400V 10.0KW 415V 10.7KW 480V 14.0KW
AT1A-3530-4 380V 13.0KW208V 12.0KW 400V 14.8KW240V 16.0KW
415V 16.0KW 440V 18.0KW
AT1A-3530-6 208V 10.0KW
AT1A-3530-7 208V 17.0KW
2
WRAP ITEM 1 WITH ITEM 8.
TERMINAL #3
TERMINAL #2
TERMINAL #1
TERMINAL #6
TERMINAL #5
TERMINAL #4
10
4
7
1
1
2
6
3
2
5
5 5 5 5 5 5 10 AT0S-3535-1 PLANK FOAM
1 1 1 1 1 1 9 AT0S-3533-1 BOX, CARDBOARD
AR AR AR AR AR AR 8 AT0S-2770-1 FOAM OR BUBBLE WRAP
1 1 1 1 1 1 7 AT0H-2782-2 BAG, 9 X 12 RECLOSABLE
25 25 25 25 25 25 6 AT0F-3401-1 NUT, SPECIAL LOCKING 1/4-20UNC-2B
1 1 1 1 1 1 5 AT0H-3532-1 PAINT BRUSH
1 1 1 1 1 1 4 AT1T-3534-1 INSTRUCTIONS, CAST HEATER FIELD REPLACEMENT
1 1 1 1 1 1 3 AT1E-2653-3 OVERTEMP SWITCH
9
1 1 1 1 1 1 2 AT0H-3412-2 WAKEFIELD 120 THERMAL JOINT COMPOUND
1 - - - - - 1 AT1A-3531-7 CAST HEATER ASSEMBLY
- 1 - - - - 1 AT1A-3531-6 CAST HEATER ASSEMBLY
- - 1 - -
- -
-- -1 1
- - - - 1 - 1
-
--
- - 1 1 AT1A-3531-1 CAST HEATER ASSEMBLY
- 1 AT1A-3531-4 CAST HEATER ASSEMBLY
AT1A-3531-3 CAST HEATER ASSEMBLY
AT1A-3531-2
CAST HEATER ASSEMBLY
410 A RELEASED TO PRODUCTION 05-15-08 LRW/ALB
ECN REV DESCRIPTION DATE APPR
REVISIONS
QTY
AT1A-3530-7
QTY
AT1A-3530-6
QTY
AT1A-3530-4
QTY
AT1A-3530-3
QTY
AT1A-3530-2
QTY
ITEM PART NUMBER DESCRIPTION
AT0A-2615-1
Unless otherwise specified,
Dimensions: Inches
Bends: 90
Tolerances:
Angular 1°
2 Place Decimal .02
3 Place Decimal .005
T.I.R .005
√125 Micro Inches
GD&T Per ANSI Y14.5M
Comments:
Do Not Scale Drawing
Drawn
Checked
Project Eng
Material:
Finish:
Name Date
ALB
LRW 5/8/2008
N/A
N/A
5/8/2008
5/8/2008LRW
Title:
Size:
Drawing No.:
D
Scale: 1:5 Sheet 1 of 1
AccuTemp Products, Inc.
8415 N. Clinton Park
Fort Wayne, IN 46825
CAST HEATER
REPLACEMENT KIT
AT1A-3530
ECN: 0
Rev.
A
Page 21
WHT
SP8914-0905
Page 18
CON TACTO R
BLK
GRN
AT0E-2662-5
480V
440V
240V
208V
BLK
COM
FINA L SELECTIO N O F
PRIMARY VOLTAGE TO BE
MAD E IN FINAL ASS EMBLY
24V
YEL
BRN
.5 A
F4
.5 A
L3
ZR5
WHT
WHT
BLK
F3
YEL
YEL
BRN
THERMAL
LIMIT SW3
L2
L1
275V
ZR1
275V
BLK
BLK
WHT
BLK
L1
T1
1
2
3
4
5
6
SSR
HEATING ELEMENT S
3
+
-
4
R1
WHT/BR N
R2
R3
VIO
WHT/BRN
*H. W . LIMIT SW 7
*BLK
VIO
J3
J4
ORN
LOW LIMIT
GRN
LT BLU
HIGH LIMIT
L1L2
PRB 2
GND
WATER SENSOR BOARD
PRB 1
J1
J2
K2
COM
N.O. N.C.
K1
COM
N.O. N.C.
PNK
J9
DK BRN
J7
RED
J8
*DK BRN
J5
*BLU
J6
AUTO-FILL O PTION ONLY
*BLK
YEL
COM
7
8
5
N.O.
N.C.
1
3
COM
6
N.O.
N.C.
2
4
WHT/BRN
DOOR SW
YEL
*
AUTO-FILL ONLY
ZR7 275V
FILL
W. VLV.
445 A RELEASE TO PRODUCTION 01/26/09 G. SEITZ
ECN REV DESCRIPTION DATE APPR
REVISIONS
YEL
LOW
WAT ER
PRTD
GRY
WHT/GRY
BRN
HIGH
WAT ER
GRY
OVER
TEMP
1 2
J2
POW ER
INPU T
1 2 3 4 5 6
+24V
GND
VIO
ORN
J7
ON/
OFF
DIGITAL
BLUE-
BLUE+
1 2
J3
SENSOR
INPU T
AT1T-3595-1
1 PHASE, 208V - 240V
(ATMOSPHERIC
STEAMER)
CONTROLLER
Unless otherwise specified,
Dimensions: Inches
Bends: 90
Tolerances:
Angular 1°
2 Place Decimal .02
3 Place Decimal .005
T.I.R .005
√125 Micro Inches
GD&T Per ANSI Y14.5M
Comments:
Do Not Scale Drawing
Drawn
Checked
Project Eng
Material:
Finish:
Name
G. SEITZ
G. SEITZ
L. WOLF
-
-
Date
12/02/08
01/26/09
00/00/00
AccuTemp Products, Inc.
8415 N. Clinton Park
Fort Wayne, IN 46825
Title:
SCHEMATIC, STEAMER,
ATMOSPHERIC
Drawing No.:Size:
C
AT1T-3595
ECN: 445Scale: 4:1
Rev.
A
Sheet 1 of 7
Page 22
WHT
SP8914-0905
Page 19
RED
CONTACTOR
L3
ZR5
275V
RED
GRN
Y
Z
X
G
WHT
WHT
BLK
L2
L1
275V
ZR1
BLK
WHT
ZR2
275V
WHT
BLK
RED
AT0E-2662-5
480V
440V
240V
BLK
208V
COM
FINAL SELECTION OF
PRIMARY VOLTAGE TO BE
MADE IN FINAL ASSEMBLY
24V
YEL
BRN
F3
.5 A
F4
.5 A
YEL
YEL
BRN
BLK
THERMAL
LIMIT SW3
BLK
L1
T1
1
2
3
4
5
6
3
+
SSR 1
-
4
R1
R3
HEATING ELEMENTS
R2
ORN
VIO
*H. W. LIMIT SW7
COM
7
*BLK
VIO
J3
J4
ORN
LOW LIMIT
GRN
LT BLU
HIGH LIMIT
L1L2
PRB 2
GND
WATER SENSOR BOARD
PRB 1
J1
J2
K2
COM
N.O. N.C.
K1
COM
N.O. N.C.
PNK
J9
DK BRN
J7
RED
J8
*DK BRN
J5
*BLU
J6
AUTO-FILL OPTION ONLY
*BLK
YEL
8
5
N.O.
N.C.
1
3
COM
6
N.C.
N.O.
2
4
RED
RED
3
L1
SSR 2
T1
+
-
4
WHT/BRN
WHT/BRN
WHT/BRN
DOOR SW
YEL
*AUTO-FILL ONLY
ZR7 275V
FILL
W. VLV.
YEL
LOW
WATER
PRTD
VIO
ORN
1 2 3 4 5 6
GND
J7
ON/
OFF
DIGITAL
GRY
GRY
BRN
OVER
TEMP
1 2
J2
POWER
INPUT
+24V
WHT/GRY
HIGH
WATER
BLUE-
BLUE+
1 2
J3
SENSOR
INPUT
AT1T-3595-2
3 PHASE, 208V - 240V
(ATMOSPHERIC
STEAMER)
CONTROLLER
Unless otherwise specified,
Dimensions: Inches
Bends: 90
Tolerances:
Angular 1°
2 Place Decimal .02
3 Place Decimal .005
Drawn
Checked
Project Eng
Material:
T.I.R .005
√125 Micro Inches
GD&T Per ANSI Y14.5M
Comments: Finish:
Do Not Scale Drawing
Name
G. SEITZ
G. SEITZ
L. WOLF
-
-
Date
12/02/08
01/26/09
00/00/00
AccuTemp Products, Inc.
8415 N. Clinton Park
Fort Wayne, IN 46825
Title:
SCHEMATIC, STEAMER,
ATMOSPHERIC
Drawing No.:Size:
C
AT1T-3595
ECN: 445Scale: 4:1
Rev.
A
Sheet 2 of 7
Page 23
BLU or ORN
SP8914-0905
Page 20
GRY
CONTACTOR
L3
RED
ZR5
550V
GRN/YEL
L3
N
L2
G
L1
AT0E-2662-5
480V
440V
240V
208V
COM
FINAL SELECTION OF
PRIMARY VOLTAGE TO BE
MADE IN FINAL ASSEMBLY
BLK
WHT
24V
YEL
BRN
F3
.5 A
F4
.5 A
YEL
YEL
BRN
BLK
BRN
THERMAL
LIMIT SW3
L2
L1
ZR1
275V
WHT
BLK
ZR5
550V
BLK
BLK
RED
L1
T1
1
2
R3
3
4
5
6
SSR 1
WHT
HEATING ELEMENTS
3
+
-
4
WHT/BRN
R1
R2
ORN
VIO
*H. W . LIMIT SW7
*BLK
VIO
J3
J4
ORN
LOW LIMIT
GRN
LT BLU
HIGH LIMIT
L1L2
PRB 2
GND
WATER SENSOR BOARD
PRB 1
J1
J2
K2
COM
N.O. N.C.
K1
COM
N.O. N.C.
PNK
J9
DK BRN
J7
RED
J8
*DK B RN
J5
*BLU
J6
AUTO-FILL OPTION ONLY
*BLK
YEL
COM
7
8
5
N.O.
N.C.
1
3
COM
6
N.O.
N.C.
2
4
RED
RED
3
L1
SSR 2
T1
+
-
4
WHT/BRN
WHT/BRN
DOOR SW
YEL
*
AUTO-FILL ONLY
ZR7 275V
FILL
W. VLV.
YEL
LOW
WATER
PRTD
GRY
WHT/GRY
HIGH
WATER
GRY
OVER
TEMP
BRN
1 2
J2
POWER
INPUT
1 2 3 4 5 6
+24V
GND
VIO
ORN
J7
ON/
OFF
DIGITAL
BLUE+
1 2
J3
SENS OR
INPUT
BLUE-
AT1T-3595-3
3 PHASE, 380V - 415V
(ATMOSPHERIC
STEAMER)
CONTROLLER
Unless otherwise specified,
Dimensions: Inches
Bends: 90
Tolerances:
Angular 1°
2 Place Decimal .02
3 Place Decimal .005
T.I.R .005
√125 Micro Inches
GD&T Per ANSI Y14.5M
Comments:
Do Not Scale Drawing
Drawn
Checked
Project Eng
Material:
Finish:
Name
G. SEITZ
G. SEITZ
L. WOLF
-
-
Date
12/02/08
01/26/09
00/00/00
AccuTemp Products, Inc.
8415 N. Clinton Park
Fort Wayne, IN 46825
Title:
SCHEMATIC, STEAMER,
ATMOSPHERIC
Drawing No.:Size:
C
Scale: 16:1
AT1T-3595
ECN: 445
Rev.
A
Sheet 3 of 7
Page 24
Z
SP8914-0905AT1A-3570 - REV-A
Page 21
GRN
CONTAC TO R
RED
WH T
BLK
ZR5
550 V
ZR2
550 V
RED
1
2
R3
3
R2
Y
X
G
RED
WH T
WH T
BLK
L3
L2
L1
AT0E-2662-5
480 V
440 V
240 V
208 V
BLK
COM
FIN AL SE LECT ION O F
PRIMARY V OL TAGE TO B E
MADE IN FINA L A SS EM BLY
24V
YEL
BRN
.5 A
.5 A
ZR1
275 V
F3
F4
YEL
YEL
BRN
BLK
THERMAL
LIMIT SW3
VIO
BLK
RED
RED
L1
T1
L1
T1
4
5
6
HEATING ELEMENT S
3
+
SSR 1
SSR 2
-
4
ORN
3
+
-
4
R1
WH T/BRN
WHT/BRN
*H. W. LIMIT S W7
*BLK
VIO
J3
J4
ORN
LOW LIMIT
GRN
LT BLU
HIGH LIMIT
L1L2
PRB 2
GND
WATER SENSOR BOARD
PRB 1
J1
J2
YEL
K2
COM
N.O. N.C.
K1
COM
N.O. N.C.
*
PNK
J9
DK BR N
J7
RED
J8
*DK BRN
J5
*BLU
J6
AUTO-FILL OP TION ONLY
AUTO-FILL ONLY
*BLK
YEL
COM
7
8
5
N.O.
N.C.
1
3
COM
6
N.O.
N.C.
2
4
WHT/BRN
DOOR SW
ZR7 27 5V
FILL
W. VLV.
YEL
LOW
WA TE R
PRTD
GRY
WHT/GRY
HIG H
WA TE R
GRY
OVER
TEMP
BRN
1 2
J2
POWE R
INP UT
1 2 3 4 5 6
+24 V
GND
VIO
ORN
J7
ON/
OFF
DIGITAL
BLUE-
BLUE+
1 2
J3
SEN SOR
INP UT
AT1T-3595-4
3 PHASE, 440V - 480V
(ATMOSPHERIC
STEAMER)
CONTROLLER
Unless otherwise specified,
Dimensions: Inches
Bends: 90
Tolerances:
Angular 1°
2 Place Decimal .02
3 Place Decimal .005
T.I.R .005
√125 Micro Inches
GD&T Per ANSI Y14.5M
Comments:
Do Not Scale Drawing
Drawn
Checked
Project Eng
Material:
Finish:
Name
G. SEITZ
G. SEITZ
L. WOLF
-
-
Date
12/02/08
01/26/09
00/00/00
AccuTemp Products, Inc.
8415 N. Clinton Park
Fort Wayne, IN 46825
Title:
SCHEMATIC, STEAMER,
ATMOSPHERIC
Drawing No.:Size:
C
Scale: 4:1
AT1T-3595
ECN: 445
Rev.
A
Sheet 4 of 7
Page 25
WHT
SP8914-0905
Page 22
WHT
1
GRN
Y
Z
X
G
AT0E-2662-5
480V
440V
240V
208V
BLK
COM
FINAL SEL ECTIO N OF
PRIMARY VO LTAGE TO BE
MADE IN FIN AL ASSEM BLY
24V
YEL
BRN
.5 A
.5 A
CONTACT OR
RED
WHT
WH T
BLK
F3
F4
YEL
YEL
BRN
THERMAL
LIMIT SW3
L3
L2
L1
275V
ZR1
RED
WH T
BLK
ZR5
275V
ZR2
275V
BLK
RED
RED
BLK
RED
BLK
WH T
L1
T1
L1
T1
2
3
4
R3
5
6
3
SSR 1
SSR 2
4
3
4
R1
HEATING ELEMENT S
~
ORN
~
~
ORN
~
R2
WHT/B RN
WHT/BRN
VIO
*H. W. LIM IT SW7
*BLK
VIO
J3
J4
ORN
LOW LIMIT
GRN
LT B LU
HIGH LIMIT
L1L2
PRB 2
GND
WATER SENSOR BOARD
PRB 1
J1
J2
K2
COM
N.O. N.C.
K1
COM
N.O. N.C.
PNK
J9
DK BRN
J7
RED
J8
*DK BR N
J5
*BLU
J6
AUTO- FILL OPTION ON LY
*BLK
YEL
COM
7
8
5
N.O.
N.C.
1
3
COM
6
N.O.
N.C.
2
4
WHT
WH T
3
L1
SSR 3
T1
~
WHT/BRN
4
~
WHT/BRN
DOOR SW
YEL
*
AUTO-FILL ONLY
ZR7 275V
FILL
W. VLV .
YEL
LOW
WATER
PRT D
GND
VIO
ORN
J7
ON/
OFF
DIGITAL
BLUE+
1 2
J3
SEN SO R
INPUT
BLUE-
AT1T-3595-5
3 PHASE, 208V 15 – 17KW
(ATMOSPHERIC
STEAMER)
GRY
WHT/GRY
HIGH
WATER
GRY
OVE R
TEM P
BRN
1 2
J2
POW ER
INPUT
1 2 3 4 5 6
+24 V
CONTROLLER
Unless otherwise specified,
Dimensions: Inches
Bends: 90
Tolerances:
Angular 1°
2 Place Decimal .02
3 Place Decimal .005
T.I.R .005
√125 Micro Inches
GD&T Per ANSI Y14.5M
Comments:
Do Not Scale Drawing
Drawn
Checked
Project Eng
Material:
Finish:
Name
G. SEITZ
G. SEITZ
L. WOLF
-
-
Date
12/02/08
01/26/09
00/00/00
AccuTemp Products, Inc.
8415 N. Clinton Park
Fort Wayne, IN 46825
Title:
SCHEMATIC, STEAMER,
ATMOSPHERIC
Drawing No.:Size:
C
Scale: 16:1
AT1T-3595
ECN: 445
Rev.
A
Sheet 5 of 7
Page 26
GRN/Y EL
SP8914-0905
Page 23
1
WH T
BLK
CONTACTOR
L3
L2
L1
ZR2
275V
EMI FILTER
WH T
BLK
1
2
3
R1
R2
R3
2
3
N
G
L1
BLU
BRN
4
WH T
5
AT0E-2662-5
480V
440V
240V
BLK
208V
COM
FINAL SELEC TION OF
PRIMA RY VOLT AG E TO BE
MADE IN FIN AL AS SE MB LY
24V
YEL
BRN
.5 A
F4
.5 A
ZR1
275V
F3
YEL
YEL
BRN
BLK
THERMAL
LIMIT SW3
VIO
L1
T1
4
5
SSR
HEATING ELEM EN TS
3
+
-
4
WHT/BRN
*H. W. LIM IT SW7
*BLK
VIO
J3
J4
ORN
LOW LIMIT
GRN
LT BLU
HIGH LIMIT
L1L2
PRB 2
GND
WATER SENSOR BOARD
PRB 1
J1
J2
YEL
K2
COM
N.O. N.C.
K1
COM
N.O. N.C.
*
PNK
J9
DK BRN
J7
RED
J8
*DK BR N
J5
*BLU
J6
AUTO-FILL O PTION O NLY
AUTO-FILL ONLY
*BLK
YEL
COM
7
8
5
N.O.
N.C.
1
3
COM
6
N.O.
N.C.
2
4
WHT/BRN
DOOR SW
ZR7 27 5V
FILL
W. VLV .
YEL
LOW
WATER
WHT/GRY
HIG H
WA TER
GRY
PRTD
GND
ORN
VIO
J7
ON/
OFF
BLUE+
1 2
J3
SEN SO R
INPUT
DIGITAL
BLUE-
AT1T-3595-6
1 PHASE, 230V
(ATMOSPHERIC
STEAMER)
GRY
OVE R
TEM P
BRN
1 2
J2
POW ER
INPUT
1 2 3 4 5 6
+24 V
CONTROLLER
Unless otherwise specified,
Dimensions: Inches
Bends: 90
Tolerances:
Angular 1°
2 Place Decimal .02
3 Place Decimal .005
T.I.R .005
√125 Micro Inches
GD&T Per ANSI Y14.5M
Comments:
Do Not Scale Drawing
Drawn
Checked
Project Eng
Material:
Finish:
Name
G. SEITZ
G. SEITZ
L. WOLF
-
-
Date
12/02/08
01/26/09
00/00/00
AccuTemp Products, Inc.
8415 N. Clinton Park
Fort Wayne, IN 46825
Title:
SCHEMATIC, STEAMER,
ATMOSPHERIC
Drawing No.:Size:
C
Scale: 16:1
AT1T-3595
ECN: 445
Rev.
A
Sheet 6 of 7
Page 27
1
SP8914-0905AT1A-3570 - REV-A
Page 24
GRN /YEL
BLU or ORN
G
WHT
L3
N
L2
L1
AT0E-2662-5
480V
440V
240V
208V
BLK
COM
FINAL S ELECTION O F
PRIMARY VOLTA GE TO BE
MADE IN FINAL A SS EMBLY
24V
YEL
BRN
GRY
BLK
BRN
.5 A
.5 A
2
3
4
5
F3
F4
YEL
YEL
BRN
RED
WHT
BLK
CONTACT OR
L3
L2
L1
ZR1
275V
BLK
WHT
ZR5
550V
ZR2
550V
RED
EMI FIL TER
BLK
BLK
WHT
BLK
RED
L1
T1
1
2
R3
3
4
5
HEA TIN G ELEME NTS
3
+
SSR 1
-
4
R1
R2
THERMAL
LIMIT SW3
3
VIO
*H. W. LIMIT S W7
*BLK
VIO
J3
J4
ORN
LOW LIMIT
GRN
LT B LU
HIGH LIMIT
L1L2
PRB 2
GND
WATER SENSOR BOARD
PRB 1
J1
J2
K2
COM
N.O. N.C.
K1
COM
N.O. N.C.
PNK
J9
DK BRN
J7
RED
J8
*DK BRN
J5
*BLU
J6
AUTO-FILL OPTION ON LY
*BLK
YEL
COM
7
8
5
N.O.
N.C.
1
3
COM
6
N.O.
N.C.
2
4
L1
SSR 2
T1
+
-
4
ORN
WHT/BRN
WHT/BRN
DOOR SW
YEL
*
AUTO-FILL ONLY
ZR7 275 V
FILL
W. VLV .
YEL
LOW
WATER
PRT D
GRY
WHT/GRY
BRN
HIGH
WATER
GRY
OVE R
TEM P
1 2
J2
POW ER
INPUT
1 2 3 4 5 6
+24V
GND
VIO
ORN
J7
ON/
OFF
DIGITAL
BLUE+
1 2
J3
SEN SO R
INPUT
BLUE-
AT1T-3595-7
3 PHASE CE, 380 - 415V
(ATMOSPHERIC
STEAMER)
CONTROLLER
Unless otherwise specified,
Dimensions: Inches
Bends: 90
Tolerances:
Angular 1°
2 Place Decimal .02
3 Place Decimal .005
T.I.R .005
√125 Micro Inches
GD&T Per ANSI Y14.5M
Comments:
Do Not Scale Drawing
Drawn
Checked
Project Eng
Material:
Finish:
Name
G. SEITZ
G. SEITZ
L. WOLF
-
-
Date
12/02/08
01/26/09
00/00/00
AccuTemp Products, Inc.
8415 N. Clinton Park
Fort Wayne, IN 46825
Title:
SCHEMATIC, STEAMER,
ATMOSPHERIC
Drawing No.:Size:
C
Scale: 16:1
AT1T-3595
ECN: 445
Rev.
A
Sheet 7 of 7
Page 28
WARRANTY
SP8914-0905
Page 26
LIMITED WARRANTY
One Year – Parts and Labor
U.S. & Canada Only
AccuTemp Products, Inc. (AccuTemp) warrants that your AccuTemp equipment will be free of defects in
material and workmanship under normal use for a period of twelve (12) months from installation or
fifteen (15) months from date of shipment from AccuTemp, whichever date first occurs (the Warranty
Period). Registration of AccuTemp equipment is required at the time of installation. Damage to
AccuTemp equipment that occurs during shipment must be reported to the carrier, and is not covered
under this warranty. The reporting of any damage during shipment is the sole responsibility of the
commercial purchaser/user of such AccuTemp equipment.
AccuTemp provides an active service department, which should be contacted and advised of service
issues, regardless of the warranty period. During the warranty period, AccuTemp must be contacted
for warranty repairs and agrees to repair or replace, at its option, F.O.B. factory, any part which
proves to be defective due to defects in material or workmanship, provided the equipment has not been
altered in any way and has been properly installed, maintained, and operated in accordance with the
instructions in the AccuTemp Owners Manual. During the warranty period, AccuTemp also agrees to pay
for any factory authorized equipment service agency (within the continental United States and Canada)
for reasonable labor required to repair or replace, at our option, F.O.B. factory, any part which proves to
be defective due to defects in materials or workmanship, provided the service agency has received
advance approval from AccuTemp factory service to perform the repair or replacement. This warranty
includes travel time not to exceed two hours and mileage not to exceed 50 miles (100 miles round trip),
but does not include post start-up assistance or training, tightening of loose fittings or external electrical
connections, minor adjustments, maintenance, or cleaning. AccuTemp will not reimburse the expense of
labor required to replace parts after the expiration of the warranty period.
Proper installation is the responsibility of the dealer, owner-user, or installing contractor and is not
covered by this warranty. Improper installation can affect your warranty. Installation is the responsibility
of the Dealer, Owner/User or the Installation Contractor. See the Installation section of the Owners
Manual. While AccuTemp products are built to comply with applicable standards for manufacturers,
including Underwriters Laboratories (UL) and National Sanitation Foundation (NSF), it is the responsibility
of the owner and the installer to comply with any applicable local codes that may exist.
AccuTemp makes no other warranties or guarantees, whether expressed or implied, including any
warranties of performance, merchantability, or fitness for any particular purpose. AccuTemp’s liability on
any claim of any kind, including negligence, with respect to the goods and services covered hereunder,
shall in no case exceed the price of the goods and services, or parts thereof, which gives rise to the
claim. In no event shall AccuTemp be liable for special, incidental, or consequential damages, or
damages in the nature of penalties.
This constitutes the entire warranty, which supersedes and excludes all other warranties, whether
written, oral, or implied.
MP4008-0904
-
EVOLUTION
STEAMER OWNERS MANUAL
Page 29
SP8914-0905
Page 25
For Parts Questions Contact:
Accutemp Technical Services
Toll Free - 800.480.0415
Standard - 260.469.3040
Fax Orders - 260.493.8914
Email - service@accutemp.net
Internet - www.accutemp.net
Loading...