Accton Technology E0698-R02, EH2041S, CheetaHub Classic-2041 User Manual
CheetaHub Classic-2041
Quick Installation Guide
EH2041S
E0898-R02
CheetaHub Classic-2041
Smart Ethernet Hub with
16 10BASE-T (RJ-45) ports,
1 10BASE2 (BNC) port,
and 1 AUI port
Copyright © 1998 by Accton Technology Corporation. All rights reserved.
No part of this document may be copied or reproduced in any form or by any means without the prior
written consent of Accton Technology Corporation.
Accton makes no warranties with respect to this documentation and disclaims any implied warranties
of merchantability, quality, or fitness for any particular purpose. The information in this document is
subject to change without notice. Accton reserves the right to make revisions to this publication
without obligation to notify any person or entity of any such changes.
International Headquarters USA Headquarters
No. 1 Creation Road III, P.O. Box 51420
Science-based Industrial Park Irvine, CA 92619-1420
Hsinchu 300, Taiwan, R.O.C. Phone Numbers Phone: 886-3-5770-270 Sales: 888-398-2101 or 949-707-4800
FAX: 886-3-5770-267 Support: 888-398-4101 or 949-707-4847
BBS: 886-3-5770-654 RMA: 888-398-3101 or 949-707-4828
Internet: support@accton.com.tw FAX: 949-707-2460
Accton is a trademark of Accton Technology Corporation. Other trademarks or brand names mentioned
herein are trademarks or registered trademarks of their respective companies.
EH2041S
E0898-R02
Quick Installation GuideCheetaHub Classic-2041
Contents
Introduction 1
Package Contents 1
Description of Hardware 1
Mounting the Hub 1
Stacking Hubs on a Flat Surface 2
Mounting Hubs in a Rack 2
Connecting the Hub System 2
Making a Connection via an MDI-X Station Port 2
Making a Connection via the MDI Daisy-Chain Port 3
Making a Connection to the BNC Port 3
Making a Connection to the AUI Port 3
Powering on the Hub 3
Verifying Hub Status 4
Applications 4
Product Specifications 4
Base Unit 4
Network Criteria 5
Introduction
The CheetaHub Classic-2041 includes 16 RJ-45 ports,
1 BNC port for connection to thin Ethernet (10BASE2), and 1
AUI port for connection to a variety of media types including
10BASE5 or fiber (using a suitable transceiver). With these
options, you can easily link the hub to a thin or thick Ethernet
backbone, or connect to a remote office. The hub also has an
indicator panel that includes utilization and link/traffic LEDs,
making it easy to monitor the hub. This guide contains all the
information required to install and operate the hub.
Package Contents
The package includes:
• CheetaHub Classic-2041 (Model No. EH2041S)
• Four rubber foot pads • BNC connector
• Rack mount bracket kit • Quick Installation Guide
• AC power cord • Owner registration card
Description of Hardware
This hub consists of 16 RJ-45 10Mbps ports, 1 BNC port, and 1 AUI port. The
following figure shows the front and back panel of the hub:
Troubleshooting 5
Diagnosing Hub Indicators 5
Power and Cooling Problems 6
Installation 6
Port and Cable Assignments 6
RJ-45 Port Description 6
EMI Certification 6
FCC Class A (USA) 6
Class A (Canada Department of Communications) 7
Class A (Taiwan Bureau of Commodity Inspection) 7
Class A Compliance (Korea) 7
VCCI Class A Compliance (Japan) 7
CE Mark Declaration of Conformance for EMI and Safety (EEC) 7
Safety Compliance 8
Underwriters Laboratories Inc. (USA) 8
Wichtige Sicherheitshinweise (Germany) 8
Warranty 9
Mounting the Hub
This hub can be placed directly on your desktop, or mounted in a rack.
Before you start installing the hub, make sure you can provide the right operating
environment, including power requirements, sufficient physical space, and proximity
to other network devices that are to be connected. Verify the following installation
requirements:
• Power requirements: 100 to 240 VAC (± 10%) at 50 to 60 Hz (± 3Hz). The hub's
power supply automatically adjusts to the input voltage level.
• The hub should be located in a cool dry place, with at least 10 cm. (4 in.) of
space at the front and back for ventilation.
• Place the hub out of direct sunlight, and away from heat sources or areas with a
high amount of electromagnetic interference.
• If you intend to mount the hub in a rack, make sure you have all the necessary
mounting screws, brackets, bolts and nuts, and the right tools.
• Check if network cables and connectors needed for installation are available.
1
Loading...