ABUS SG1681 Service Manual

Flashing Light and Siren (red)

Art. no. SG1681

Can be used in interior areas and protected outer areas

•
Separate control of flash light and siren

•
Sound pressure: 100 dB (A) @ 1 m

•
Protection class: IP34

•

Page 1 of 1

The flashing light and siren can be mounted inside and outside your building. This combination signalling device
is the crucial link of a fully functioning alarm chain. In the event of an alarm, the alarm sounder generates a
loud intermittent tone with over 100 dB sound pressure. In addition to the acoustic protection, there is an
optical alert from a colored flashing light (frequency: 2 Hz). The alarm sounder and the light can be controlled
separately. The robust plastic housing (IP 34) of the combination detector offers protection against environmental
influences. To ensure a long service life, you should install the signalling device under cover and protect it from
rain. The flashing light and siren are supplied externally with 12V operating voltage. You can choose between
three different light colors, according to taste: red (SG1681), yellow (SG1682), and blue (SG1683).

Technical Data:

Dimensions (WxHxD) 122x73x43 mm
Flashing frequency 2 Hz
Width 122 mm
Housing material ABS
Height 73 mm
Length 43 mm
Power consumption 2,4 W
Luminous color Red
Illuminant 4 x Light bulb

Max. operating
temperature
Min. operating
temperature
Installation location Indoors and protected

Sound pressure 100 dB
IP protection class 34
DC voltage supply 12 V

50 °C

-10 °C

outdoor areas

Power consumption 200 mA

Powered by TCPDF (www.tcpdf.org)

Technical alterations reserved. Misprints and errors excepted. Copyright. © ABUS 02/2020