ABUS SG1650 Service Manual

Optic/Acoustic Combination Signal Transmitter
Art. no. SG1650
Robust siren in aluminum housing
• Extremely loud 110 dB (A) @ 1 m
• Siren and flash light can be controlled separately
• Sabotage-monitored
Page 1 of 1
The compact alarm system siren and flash can be mounted inside and outside your building. This professional combination signalling device is the crucial link of a fully functioning alarm chain. In the event of an alarm, the alarm sounder generates an extremely loud signal tone with over 110 dB sound pressure. In addition to the audible alarm, there is an optical alert from a red Xenon strobe light that is visible over long distances (flash frequency: 1.17 Hz). The alarm sounder and the strobe light can be controlled separately. The weatherproof aluminium housing (IP 34) of the combination signalling device is protected from tampering by a wall contact and a cover contact as well as by an additional internal grill. The siren and flash are supplied externally with 12V operating voltage. With a Xenon strobe, the maximum power consumption is 750mA, without strobe 350mA.
Technical Data:
Dimensions (WxHxD) 190x310x115 mm Flashing frequency 1,17 Hz Width 190 mm Housing material Aluminium Height 310 mm Length 115 mm Power consumption 4,08 W Luminous color Red Illuminant Xenon
Max. operating temperature Min. operating temperature Installation location Indoors and outdoors Tamper monitoring Yes Sound pressure 110 dB IP protection class 34 DC voltage supply 12 V
55 °C
-25 °C
Power consumption 340 mA
Powered by TCPDF (www.tcpdf.org)
Technical alterations reserved. Misprints and errors excepted. Copyright. © ABUS 02/2020
Loading...