Page 1
Door fitting HLS214 ZS
Technology
According to DIN EN 1906 SK 1 and DIN 18 257 ES 0
•
Integrated pulling protection with cylinder cover plus freely rotating special steel disc
•
Increased leverage resistance: solid cams plus inner screws
•
Proven layered construction: hardened steel bottom plate, plus sturdy cover plate
•
HLT: spacing: 92 mm, square bolt: 10 mm
•
KLT: spacing: 72 mm, square bolt: 8 mm
•
Just one version is necessary to cover cylinder protrusions from 10 - 18 mm
•
Page 1 of 1
Operation and use
For main entrance doors
•
Grip plate outside, handle inside
•
HLS: Suitable for door thicknesses of 52 - 67 mm
•
KLS: Suitable for door thicknesses of 37 - 47 mm
•
Variants
Finishes: F1 (alu anodized), F2 (silver anodized)
•
Standard door fitting with cylinder protection
Powered by TCPDF (www.tcpdf.org)
Technical alterations reserved. Misprints and errors excepted. Copyright. © ABUS 06/2019
Loading...