ABUS AZ4230 Service Manual

Terxon LX 8-Zone Wired Extension

Art. no. AZ4230

5-wire bus connection

•
2 transistor outputs

•
Enables individual identification of detectors (advisable in areas where safety and security are important)

•
Allows clustering in logical areas

•
Minimises cabling work

•

Page 1 of 1

The Terxon LX 8-zone Wired Extension is an extension module for the Terxon LX. With this module you can extend
your alarm system by 8 wired alarm zones. The 8 zones of the wired extension are connected to the motherboard
of the Terxon LX via bus cables. You can connect up to 32 extension modules (wireless or wired) to your existing
alarm control panel. The Terxon LX can thus be expanded to 264 zones. The additional alarm zones are freely
programmable and monitored against tampering. The type of wiring – NC or DEOL – is left up to you, but it must
be the same for all zones. You can address the zones of the extension module via jumper.

Technical Data:

Dimensions (WxHxD) 128x183x35 mm
Connections 5-wire bus
Number of wired zones 8
Width 128 mm
Housing material ABS
Height 183 mm
Length 35 mm
Power consumption 60 W
Max. operating

55 °C

Max. humidity 96 %
Min. operating

-10 °C
temperature
Net weight 0,31 kg
Tamper monitoring Yes
Switching outputs 2
DC voltage supply 12 V
Power consumption 60 mA
Zone closure NC, DEOL (FSL)

temperature

Powered by TCPDF (www.tcpdf.org)

Technical alterations reserved. Misprints and errors excepted. Copyright. © ABUS 01/2020