ABUS AZ4110 Service Manual

LCD Keypad For Terxon SX / MX

Art. no. AZ4110

For operating and programming the alarm panel Terxon SX/MX

•
Suitable for indoor and protected outdoor use

•
Operate your alarm panel with PIN code or proximity key fob

•
Proximity chip reader integrated

•

Page 1 of 3

The LCD Keypad is an extension module for the Terxon SX and Terxon MX. Installed near the entrance door, it
allows you to quickly operate your alarm panel. The LCD keypad is connected to the Terxon SX/MX via a 4-wire bus
cable. Up to 4 control units can be integrated into the alarm system. Arranged in various parts of your building,
these extension modules provide additional convenience. The system can be conveniently activated or
deactivated via any keypad using a PIN code and proximity chip key. The status of the alarm control panel is also
displayed on the plain text display of the control unit. You can conveniently view and, of course, change system
settings, programming and the 250x event memory of the Terxon S/M. The LCD keypad is designed in an elegant
white color. Thus, it is not only an enhancement for each entrance area, but it is also optically in line with the
wireless components of the Secvest 2WAY.

Technical Data:

Dimensions (WxHxD) 135x135x30 mm
Connections 4-core bus, screw terminal

for additional tamper
contact, panic alarm
button, and button for
manually ending the exit

delay
Width 135 mm
Housing material ABS
Height 135 mm
Integrated siren Yes
Length 30 mm

Power consumption 0,36 W
Max. operating
temperature
Max. humidity 94 %
Min. operating
temperature
Installation location Indoors and protected

Net weight 0,2 kg
Tamper monitoring Yes
IP protection class 54

55 °C

-10 °C

outdoor areas

Technical alterations reserved. Misprints and errors excepted. Copyright. © ABUS 01/2020

LCD Keypad For Terxon SX / MX

Art. no. AZ4110

Security level 2

Page 2 of 3

Technical alterations reserved. Misprints and errors excepted. Copyright. © ABUS 01/2020