Abocom WR404 User Manual
802.11g Wireless VPN Router
The WR404 is a high-speed wireless VPN router with a 4-port fast Ethernet
switch. The WR404 features the Virtual Private Network (VPN) function,
which creates encrypted “tunnels” through the Internet allowing offsite users,
telecommuters or branch office to securely connect to your office network.
With the implementation of WEP,WPA ,802.1x, etc… users will be able to
have high performance, secure wireless communication within the enterprise.
When equipped with two different radios, i.e., 802.11g and 802.11b, the
WR404 can also provide dual band wireless connections for all 802.11g and 802.11b client users.
The WR404 has multiple security capabilities to protect your company resources and data security. These firewall capabilities
include Stateful Packet Inspection (SPI) to prevent malicious DoS attacks, Intrusion Detection System (IDS), etc.
The WR404 comes with dual WAN ports, which provides dual connections to the Internet to reduce the risk of a potentially
catastrophic shutdown if one of the connections should fail. Both WAN links backup each other automatically. Internet
connection never fails. In addition, the included built-in 4-port switch allows direct connection of up to four wired computers
or daisy-chain out to more hubs and switches, while several wireless clients can also securely connect to the network. You can
create a network as big as you need. Plus, the user-friendly web-based utility provides the freedom and flexibility for anytime,
any place management.
FEATURES
NAT
Supports PPPoE,
Dial-on-Demand and auto-disconnect for PPPoE
DHCP Server/Client
Web-based Management
VPN (IPSec) Tunneling
Policy-based packet filter
Stateful Packet Inspection protects against DoS attack
Supports Virtual Server
Supports Dynamic DNS
Supports Dual WAN auto backup
SPECIFICATIONS
General
Protocols Supported
Firewall /Alert
VPN
IPSec support
Management
Functions
IP, NAT, ICMP, DHCP client/server, PPPoE, PPP, PAP, CHAP, NTP, HTTP
NAT, Stateful Packet Inspection (SPI), DoS (Denial of Service), Intrusion Detection System (IDS), Attack
Alert (Email) /Logging, Access Control, Web URL content filtering,
IPSec (ESP, AH), MD5, SHA-1, DES, 3DES, IKE
IPSec-based 56-bit (DES) or 168-bit (3DES) encryption algorithm, MD5 or SHA-1 hashing algorithm,
AH/AH-ESP support, PKI features with X.509 v.3 certificate support, remote access VPN (client-to-site), site-
to-site VPN, IPSec NAT traversal (VPN pass-through)
Web-Based configuration and management, or GUI Setup program for Windows 98/ME/NT/2000/XP
WELF-based logging format, SYSLOG, e-mail alerts
802.11d Multiple regulatory domains
Access Point Radio enable/disable
Power-saving operation
Multiple transmit power levels
Mangement Application Interface (API)
Hidden SSID
Multiple SSID
Intra-BSS Bridging
Configurable fragmentation & de-fragmentation
Configurable RTS/CTS access
Configurable and auto-negotiated long and short preambles
Applications
IP addressing
Routing
Network Timer
LED Indicators
Firmware Upgrade
LED Indicators
Ports
Input power
DDNS (Dynamic DNS), Proxy DNS, UPnP, VPN ( IP- Sec ), Virtual Server, Special Internet Applications,
Dial-on-Demand and Auto-Disconnect, Authentication with PAP and CHAP for PPPoE
Static IP address assignment on both WAN and LAN
Internal DHCP server on LAN
DHCP client on WAN
PPPoE client support on WAN
RIP v1, RIP v2 (static routing, dynamic routing)
SNTP
Power/Error
WAN Link/Act
LAN* Link/Act
HTTP, TFTP download or proprietary network protocol download
Power/Error
WAN Link/Act
LAN* Link/Act
WAN: 2 x 10/100Mbps RJ-45 port for Cable/DSL Modem
LAN: 4 x 10/100Mbps switched ports, UTP Category 5 or better (100Base-TX)
DC 5V, 2.4A
Green: Power On; Red: System Error
Green for 100/10M (flashing for activity)
Local (1 – 4 ) Green for 100M/10M (flashing for activity)
Green: Power On; Red: System Error
Green for 100/10M (flashing for activity)
Local (1 – 4 ) Green for 100M/10M (flashing for activity)
Loading...