Abocom WR104 User Manual

WR104

Wireless Router with
4-port Fast EtherSwitch

INTRODUCTION

The Wireless Router with 4-port Fast EtherSwitch is a broadband
IEEE 802.11b compliant wireless router with a built in four-port fast Ethernet switch.
It offers the easiest way to share and extend your high-speed DSL/cable modem
Internet connection, either with or without wires. This high-performance
IEEE 802.11b standards-based router connects all of your PC's equipped with
wireless PC cards, while an integrated 4-port fast Ethernet switch connects your
devices that need Ethernet wiring.
The Wireless Router with 4-port Fast EtherSwitch provides not only the ease
of Internet access, but also the privacy of data transmission. Network Address
Translation (NAT) and VPN pass-through provide your network with protection
from hackers, while 64 and 128-bit WEP encryption guard your wireless network
for maximum privacy. All incoming data packets are monitored and filtered.
It can also be configured to block internal users from accessing to the Internet.

FEATURE
* Fully compatible with IEEE 802.11b standard and supports a high

data rate up to 11 Mbps

*

Interoperable with IEEE 802.11b (DSSS) 2.4GHz-Compliant

equipment

*

Capable of 64/128-bit WEP encryption

*

Adjustable antennas provide for better access angle

*

MAC address filtering, IP filtering, DHCP client/server

Specification

IEEE 802.3 10Base-T Ethernet
IEEE 802.3u 100Base-TX Fast Ethernet

Standards

Frequency

Channels

Data Rate (wireless)

Security Encryption

Antenna

Ports

Buttons

LED indicators

Protocols Supported

Management

Input power specifications

Power Consumption

Physical Dimension

Weight

Agency and Regulatory

Operating Temperature

Operating Humidity

ANSI/IEEE 802.3 N-way Auto-Negotiation
IEEE 802.11b Wireless LAN

2.412 GHz to 2.4835 GHz Direct Sequence Spread Spectrum (DSSS)

11 Channels (US, Canada)
13 Channels (Europe)
14 Channels (Japan)

1, 2, 5.5, and 11Mbps

64-bit, 128-bit WEP encryption

Two fixed type antennas

WAN: One 10/100Mbps RJ-45 port for Cable/DSL Modem
LAN: Four 10/100Mbps switched ports

Two MDI/MDIX buttons; one is for WAN connection,
the other is for the 4 local port uplinkOne Factory Reset button

Power / Error Green / Orange
Internet (100/10Mbps) Green / Yellow (flashing for activity)
Local (100/10Mbps) Green / Yellow (flashing for activity)
Wireless LAN Green (flashing for activity)

TCP/IP, NAT, ARP, ICMP, DHCP client/server, PPPoE, PPP, PAP, CHAP, NTP,HTTP, TFTP, POP3, RIP1/RIP2

Web-Based configuration and management

DC 5V, 1.5A

5W

161 x 113 x 21mm (Width x Depth x Height)

550g

FCC part 15 Class B, CE mark

0 C to 50 C

0-90% non-condensing

th

3

*

Compatible with all major operating systems

*

1 port 10/100 Mbps N-Way Fast Ethernet for WAN (Internet connection)

*

4 ports 10/100Mbps N-Way Fast Ethernet Switch for LAN

*

Supports VPN (PPTP, L2TP, IP-Sec pass thru)

*

Supports PPPoE

*

Auto-reconnect for PPPoE

*

Supports Static DNS/IP

*

Supports Internet applications such as Web, ICQ, FTP, Telnet, E-Mail,
News, NetMeeting, Net2Phone, PCAnyWhere, mIRC, CuSeeMe,
AoE etc.

*

Natural firewall keeps hackers out

*

Support DoS (Denial of Service) hacker pattern detection and Event Log.

*

DHCP Server allocates up to 253 client IP addresses.

*

DHCP Client Table (Keep lock IP + MAC address)

*

DHCP Client to get global IP address automatically.

*

Virtual server.

*

Policy based Packet Filters/Access Control and Time Schedule Control.

*

Web UI Local/Remote Configuration and Management.

*

Flash memory for firmware upgrade.

*

Virtual DMZ Host.

*

Blocks WAN request and Remote "Ping" request

*

System Configuration can be save or load

*

Support Network time (SNTP) and System Log