Abit TH7-RAID, TH7 User Manual Rev. 2.01

Specifications and Main Features

1. CPU Support

Intel Pentium 4 Processor with a Socket 423 is supportable.
400 megahertz (MHz) system data bus.

2. Chipset

Intel: 82850MCH + 82801BAICH2.
Microchip supports 400 MHz Front Side Bus.
Compatible with 4X AGP only for 1.5V devices.
Complies with Advanced Configuration Power Interface.
Enhances Ultra DMA 100/66/33 mode compatibility.

3. Ultra DMA 100/RAID

Integrated HighPoint HPT370 IDE Controller.
100MB worse with ultra DMA sharing aids in quicker bandwidth fluctuation and data affiliation.
Access on RAID 0; striping and RAID 1; mirroring, along with RAID mode 0+1.

4. Memory

With Direct Rambus RIMM modules, provide support for 4 x 184 pin sockets.
The RDRAM maximum capacity supported is 512MB. Thus, the combination being 64, 128, 256, and 512 allows a maximum of 2GB for the 2RDRAM.
Computer Memory 600 or PC800 RDRAM is compatible.

5. Audio

The inclusion of integrated AC 97 digital audio controller encompasses.
Audio Codec with 97 features such as 2 channels is included.

6. System BIOS

SoftMenu technology of the second generation.
Integrated Award Plug and Play BIOS supporting saves on loading screens with APM and ACPI.
The anti virus function which retracts writing is called immunx.

7. Multi I/O Functions

Four channels of Bus Master IDE Ports of ultra DMA 33/66/100 along with Mouse and keyboard PS/2 sockets.
Max Space: Floppy Port 2.88MB, Parallel Port, EPP/ECP, Serial ports, 3 pin USB connectors, Audio connectors such as line in, game pads.

8. LAN (Manufacturer Option)

WINBOND W83553CF PCI Li go Ethernet controller
10/100 Ethernet support
Fully compliant with ACPI and supports Wake on LAN

9. Other Features

Form factor of mother board is ATX
1 AGP slot supporting Speed of up to 4X, 5 PCI slots, and 1 CNR slot
Features temperature monitoring for system and CPU, Fan Speed, and Voltages
Power on with Keyboard and Mouse

Frequently Asked Questions

Q1: Which processors can be used with the Motherboard, TH7-RAID?

A1: An Intel Pentium® 4 socket which is rated 423 is supported with the motherboard, TH7-RAID.

Q2: What is the maximum memory capability for the motherboard TH7-RAID?

A2: The motherboard possesses 4 pcs of 184 pins RDRAM for memory enhancement with a limit of 2GB capacity.

Q3: Is the motherboard TH7-RAID able to perform RAID functions?

A3: Yes, example of supported RAID’s are RAID 0 (which includes striping), RAID 1 (which covers mirroring), and RAID 0+1 (consisting of striping plus mirroring) covers.

Q4: What is the Audio Integrated Performance of the motherboard TH7-RAID?

A4: A 2 channel Audio CODEC is embedded with the board which is combined with the AC’97 Digital Audio controller.

Q5: What about the USB interfaces, can I use USBs with this motherboard TH7-RAID?

A5: Yes, you can use the USBs with this motherboard as there are 3 connectors onboard for USBs enabled devices.

Q6: Which power supply must be used with the TH7-RAID Motherboard?

A6: +5VSB compliant ATX 2.03 specification which is an ATX12V power supply is required.

Q7: Ultra DMA 100 transfer rates are supported in TH7-RAID motherboard, what’s the maximum capability when it comes to IDE transfer?

A7: Capable of 100 Ultra DMA for the TH7-RAID is available in the TH7 model.

Q8: Is there a provision for hardware monitoring in the TH7-RAID motherboard?

A8: Yes, it monitors fan speed voltages and CPU/system temperature.