ABC Office FD 415 User Manual
Specifications and Main Features
- Size of Paper
- Maximum size: 117 x 17 inch
- Minimum size: 4 x 5 inch
- Weight of Paper: 64 – 157 grams/m²
- Width of Cut: 2.5 – 99 inches (Set Strategically in 0.1s)
- Cutting Method: Burst Method
- Paper Feeding: Through Rubber Ring
- Feed Pressure: Yes – Adjustable (3 positions as regards to thin, normal or thick paper)
- Tray Size: For 64 g/m² High Quality Paper – 500 sheets
- Cutting8 Speed:
- Maximum Unit: 140 sheets/min
- Minimum Unit: 90 sheets/min (at eleven inches)
- Stacker: Drop type
- Functions Present
- Jam detection and automatic stop
- Monitor display
- Automatic stop at the last sheet
- Safety cover with interlock mechanism
- Dimension (mm):
- Dimensions (in mm):
403 (W) x 482 (D) x 222 (H), body of the machine
- Receiving stand attached : + 146(D), + 185(D) up Feed Paper Stand
- Weight: - 25 Kg
- Source of Power : 120V AC, 60 Hz
- Consumption of Power: 63W (0.75A)
- Conditions of Work:
- Temperature: 5 – 40 degree Celsius
- Relative Humidity: 20 - 80, no condensation.
- Accessories:
- Electric power supply cord: 1
- Paper receiving guide: 2
- Auxiliary paper feed plate: 1
- Paper receiving stopper: 1
- Supporting compartment for paper: 1
- Booklet - thickness: 1
Frequently Asked Questions
Q: Is there any restriction on the sort of cut sheets that I may use with the FDA 415 model?
A: FDA 415 only operates on cut sheets that whose minimum applications are 4 by 5 inches to a maximum of 11 by 17 inches and has a paper weight of 64 to 157 g m/2.
Q: Are there any restrictions on the supplying cut column size?
A: Yes there is, normally speaking cut column size can be estimated and altered anywhere between 2.5 to 99 inches, supplied in steps of 0.1 inches using the length switch.
Q: If there is a paper jam situation, what would be the outcome if the situation arose?
A: In that scenario, the device would self-stop and a jam would let a yellow light slip and blow up. Jammed pages would have to be torn out in order to carry on with the designated task on hand.
Q: Can the feed pressure be changed?
A: Three positions on almost all grade thicknesses allows the feed pressure to be moved with cut sheets of normal thickness.
Q: How rapid is it possible to cut using FDA 415?
A: FDA 415 has a ratio of 140 over 90 which translates to having a cutting speed of 140 sheets per minute on high speed and 90 sheets per minute on low speed .
Q: Does the machine have a sensor?
A: Yes, because it aims to provide maximum safety, the machine has a safety cover that has an interlocking device, which will stop the movement of the machine as soon as the cover is removed.
Q: What electrical specifications are required for the FD 415 to work properly?
A: This model works with a rated voltage of 240 volts and 60Hz.
Q: What kinds of supplies are given together with the FD 415?
A: The accessories provided with this machine include: an electric power cord of approximately six feet, two guides for receiving paper, another plate, its manual for guidance.
Q: What is the maximum quantity of papers the tray can accommodate in case it gets too full?
A: The maximum capacity for a tray which is capable of accommodating 500 sheets is for 64 g/m² paper.
User Manual
Loading...