ABC Office DAHLE 450, DAHLE 20453, DAHLE 20452 User Manual

1-800-658-8788 - www.abcoffice.com
450 SERIES HOPPER SHREDDERS
20452 20453
20451.90.1830 – 01/04 -
Congratulations on your purchase of a DAHLE Hopper Feed Shredder! We
1-800-658-8788 - www.abcoffice.com
here at DAHLE USA are dedicated to providing rugged and dependable products for the large, and not so large office. We are sure your new DAHLE Hopper Feed Shredder will meet or exceed your expectations of quality and service.
If you have any questions regarding your new DAHLE paper shredder, call your sales representative, or call DAHLE Customer Service, toll free at (800) 995-1379 between 8:30 am and 5:00 pm Monday through Friday, EST.
Check off the model and record the serial number for your records in the space provided below.
20452 20453
Serial Number: __________________________
DIAGRAM KEY
1. Key Lock / Safety Stop Button
2. Reset Button
3. Power Lamp
4. Forward Button
5. Stop Button
6. Reverse Button
7. Leveling Foot Lock Nut
8. Leveling Foot
9. Waste Door
10. Waste Bin
11. Shred Bag
12. EDP Shelf
13. Access Door
14. Main Plug
1-800-658-8788 - www.abcoffice.com
CARING FOR YOUR SHREDDER
,
,
,
1-800-658-8788 - www.abcoffice.com
Clean covers with a clean dry cloth. Do not use water or solvents. Make sure you disconnect your shredder from its power source before cleaning.
Paper shredders, like all mechanical equipment, need proper maintenance to ensure efficient operation. Periodic lubrication of the cutting blades is important to offset the friction generated within the cutting head. Frequency of lubrication will vary depending on the shred size and the amount of usage. A strip-cut shredder receiving light use (1 – 2 hours per week) will require lubrication only once or twice a month, while the same machine used 1 – 2 hours per day will require lubrication weekly. A cross-cut shredder should be lubricated every ½ hour of shredding time to maintain maximum capacity and efficiency.
The procedure for lubricating your shredder is simple, and can be performed by any operator. The oil is packaged in a squeeze bottle and is applied directly to the cutting blades through the feed opening (3). Run a fine stream of lubricant from one side of the feed opening to the other. Run the shredder in REVERSE for a few seconds to help distribute the lubricant evenly. You can now continue shredding as usual.
DAHLE Shredder Oil is the only lubricant you should use in your paper shredder. It has been specially formulated so as not to leave any residue that could attract dust and clog the shredding mechanism. You can order DAHLE Shredder Oil (item # 740) from your local dealer.
Repairs on your paper shredder should only be performed by qualified technicians. If you need service, contact your local dealer, or you can contact DAHLE USA Customer Service between 8:30 am and 5:00 pm EST at (800) 995-1379.
BEFORE YOU CALL FOR SERVICE
SYMPTOM POSSIBLE CAUSES SOLUTION
No Power Unit not unlocked Unlock Safety Button
and press reset
Low capacity according to instruction.
IF ANY
Unit unplugged Connect to outlet Outlet dead Reset circuit breaker Door not fully closed Close Door Shred Bag full Change Shred Bag Cutting blades dry Lubricate cutting blades
THER PR
BLEM
R ALL Y
R ATHRIZED DAHLE
ERVI
E DEALER
1-800-658-8788 - www.abcoffice.com
1-800-658-8788 - www.abcoffice.com
SHREDDING
Turn shredder on. Press Forward Button (4) to begin shredding operation.
The shredder can be fed either from the top or the front. For this purpose, a feed opening is provided on the top for emptying waste paper baskets (paper only) and at the front for feeding cut stock and continuous forms.
Three (3) EDP shelves can be folded up to facilitate the shredding of continuous forms.
The shredder will not operate unless the Waste Door (9) and Access Door (13) are completely closed.
Microfiche and transparencies can also be shredded in the same manner as paper, however, you should shred a piece of paper after every 8 or 10 sheets of plastic. This helps clean plastic particles out of the shredding mechanism.
CAPACITY
Capacity is the number of sheets of 8½” x 11” paper that can be shredded at one time. These figures are approximate and machines may vary slightly due to various conditions. It is not recommended that you try to run your shredder at maximum capacity, as this increases the chance of a paper jam.
Model 20452 85 100 20453 65 85
20 Lb. Bond 16 Lb. Bond
1-800-658-8788 - www.abcoffice.com
Loading...