ABB CC-U Range, CC-E Range Features and Benefits
Analog signal converters
CC-U & CC-E Range
Signal converters
& Isolators
CC-U range
• 8 different standard signal outputs on one device
•
Input and output side universally congurable
• Also available with 2 threshold relay outputs
• Adjustment and operating elements on the
front side
• Safe operation by electrical 3-way isolation
• Plug-in connecting terminals, unambiguously
and clearly marked
Conversion, measurement and separation of:
• Standard signals
• Signals of RTD sensors (PT10, PT100,
PT1000)
• Thermocouple signals
• RMS values of currents and voltages
Characteristics
• The required input and output ranges can be
congured for all devices by means of directly
accessible DIP switches positioned on the
side.
•
Due to the wide input range of the gain and
offset stages all input signals between the
minimum and the maximum input value can be
universally converted to all common output sig-
nals.
•
Devices for DC or AC (50/60 Hz) supply available.
CC-E range
• Universally congurable devices and single-function devices
• Adjustment and operating elements on the front
side
• Safe operation by electrical 3-way isolation
• Unambiguous and clear connecting terminal
markings
Conversion, measurement and separation of:
• Standard signals (0-5 V, 0-10 V, 0-20 mA, 4-20
mA)
• Temperature signals of RTD sensors (PT 100)
• Thermocouple signals (types J and K)
• Current measurement signals (0-5 A, 0-20 A AC/
DC)
Characteristics of single-function devices
• No adjustment or balancing necessary.
Characteristics of universal devices
• The required input and output ranges can be
congured by means of directly accessible DIP
switches positioned on the side
• Gain adjustment of ± 5 % by means of an adjust-
ment
potentiometer on the front-side
• Offset adjustment of ±5 % by means of adjustment potentiometers on the front-side
12
Analog
Low Voltage Products & Systems 12.1
ABB Inc. • 888-385-1221 • www.abb.us/lowvoltage 1SXU000023C0202
Signal converters
Loading...