PLUSCONNECT
Wireless Activity Pedometer
Instruction Manual
Thank you for purchasing the PLUSCONNECT Wireless Activity Pedometer. Please read this user manual for detailed instructions on how to set up and enjoy the various features this device has to offer. If you have questions or require more information, visit our website at www.andonline.com.
Features
The pedometer tracks activities to help you learn how your actions translate to caloric burn so you can focus on what matters.
•Pedometer tracks steps and distance travelled.
•The built-in altitude monitor counts vertical distance climbed.
•Automatically syncs data to mobile app
WARNING: Before beginning any exercise program or changing your physical activity patterns, you should always consult with your doctor or physician, particularly if you have been inactive, are very overweight, or have or suspect any sort of medical condition that might be worsened by exercise.
Wearing Your PLUSCONNECT Wireless Activity Pedometer
The Pedometer is equipped with an advanced 3-dimensional G-Sensor that lets you wear it anywhere you like: in a pocket, a bag, on a lanyard around your neck, or even clipped to an undergarment if you wish it to be hidden from view. No matter what position the pedometer is in, it will still accurately count your steps and record your data. The pedometer’s advanced G-Sensor software compares the three-dimensional data it collects to walking, jogging and running models to ensure that each step it counts is a true rhythmic step and not an invalid movement or vibration. Just wear it and walk, jog or run—it’s that simple!
Wearing your pedometer in wet conditions
Your pedometer is water resistant but NOT waterproof. While it is designed to be sweat-proof and rain-proof, you should NEVER immerse your pedometer in water.
PLUSCONNECT Wireless Activity Pedometer Display Modes
The pedometer has one button that cycles through various displays so that you can see your core metrics without a Bluetooth® mobile device or computer. The pedometer displays 6 modes: Start, Steps, Clock, Altitude, Device nickname, and Device address.
|
Start mode |
|
Device address |
Steps mode |
|
mode |
||
|
||
Device nickname |
Clock mode |
|
mode |
||
|
Altitude mode |
Parts Identification
USB cable*
Wireless Activity Pedometer
Safety leash
Lanyard
*Do not connect any kind of Portable Power (Power Bank) to the pedometer for power charging. You can connect the device to an AC adapter or a computer USB port using the included USB cable for power charging.
Device Setup and Pairing
Getting Started
Plug the device into the USB connector provided, then plug USB into power source – either a computer* or AC adapter.
Note: Your device was put in power-save mode during shipping, therefore you need to plug into to awaken the device. *Some computer USB ports may not deliver enough power supply to charge or awaken the device. Try a different port on the same or on a different computer.
Pairing (user can pair to A&D Connect or third party applications that are compatible. For third party applications, please open your receiver’s device application and follow its instructions.)
A&D Connect
1. Download the free “A&D Connect” app from the App Store or Google play.
Choosing a Step Buffer
In order to prevent your pedometer from registering incidental movements as steps such as those which occur when you shift your position while working at a desk or a counter, your device has a sensitivity buffer that you can adjust.
By default, your device is set at 10. Setting your pedometer at 3 increases the buffer’s sensitivity – more steps will be recorded including occasional incidental steps. Setting your pedometer at 10 decreases the sensitivity – the device
will only track any consecutive step-like movements beyond 10. Setting your pedometer at 10 should be suitable for most lifestyles.
Setting Your Step Buffer
1.In Steps mode, press and hold the device button for five seconds. The small number “1” should appear beside the walking icon.
2.Pressing and holding the button for five seconds will toggle between the
1-step buffer, the 3-step buffer, the 5-step buffer and the 10-step buffer. Stop pressing when the small number by the walking icon indicates the buffer you would like the pedometer to use.
Press and hold |
|
Press and hold |
|
Press and hold |
|
Press and hold |
5 seconds |
|
5 seconds |
|
5 seconds |
|
5 seconds |
1-step filter |
|
3-step filter |
|
5-step filter |
|
10-step filter |
2.Turn on Bluetooth® settings on your mobile device (Smartphone or tablet).
3.Install and launch the “A&D Connect” app. The app will guide you through the account set up process.
Account
Registration 
Guest Account
Charging your PLUSCONNECT Wireless Activity Pedometer
The pedometer device will display “Charge Now” when the battery is low. Please plug it in to a USB power source using the included USB cable. To protect the battery life, you should charge the device when the “Charge Now” indicator appears. Do not leave the device plugged in for an extended period of time without use. Once it is fully charged, unplug it from the power source and store until use.
Note: The screen will show the battery power level when the battery is in charging.
4.Select “PLUSCONNECT Wireless Activity Pedometer” from the device set up screen, then tap “Pair” on your phone or tablet screen.
Note: If there are multiple PLUSCONNECT Wireless Activity Pedometers in a contained area, then you may see multiple devices appear to choose to pair. If you are unsure which device is yours, press the button on the Activity Pedometer repeatedly until the default nickname “HELLO” is Displayed (see PLUSCONNECT Wireless Activity Pedmoter Display Modes). Then, press and hold the button for 5 seconds. The device ID will be displayed.
|
|
|
|
Pairing |
PLUSCONNECT |
|
|
|
Request |
|
|
|
select pair |
|
Activity Pedometer |
|
|
|
|
XL-100BLE |
|
|
|
|
|
|
|
|
|
Manually Shutting Down
To protect your pedometer’s battery life, we recommend to fully charge your device at least once per month, then manually shut it down.
Manual shutdown:
In the device address mode, press and hold the button until the screen shows
Press the button. The screen shows “SUSPEND”. a message of “Activate XL-100BLE
connect XL-100BLE to USB power”.
5.Your PLUSCONNECT Wireless Activity Pedometer is now paired and you can start reporting immediately.
Loading...