AAEON PER-C10L User Manual

Mini-PCI Ethernet Module PER-C10L

Notice

This guide is designed for experienced users to setup the system in the shortest time.
Always completely disconnect the power cord from your board whenever you are working on it. Do not make connections while the power is on, because a sudden rush of power can damage sensitive electronic components.
Always ground yourself to remove any static charge before touching the board. Modern electronic devices are very sensitive to static electric charges. Use a grounding wrist strap at all times. Place all electronic components on a static-dissipative surface or in a static-shielded bag when they are not in the chassis
Part No. 2007C10L13 Printed in Taiwan Sept. 2009
PER-C10L Quick Installation Guide 1
Mini-PCI Ethernet Module PER-C10L
A Message to the Customer
Fist of all, thank you for purchasing PER-C10L Mini PCI Ethernet module. This Quick Installation Guide will help you on the process of the installation. Please read it thoroughly before you start to install it. The product comes with a sheet of warranty for two years assurances except for improper use. Therefore, we strongly suggest you to read and refer to the Quick Installation Guide before any installation. You may visit AAEON website for the latest version of the instruction. Please refer to
PER-C10L Quick Installation Guide 2
Http://www.aaeon.com
Mini-PCI Ethernet Module PER-C10L
Product Warranty
AAEON Customer Services
All products in AAEON are designed as the strictest specifications to ensure that the products will own the reliable performance in the typical industrial environments. Whether your purchase from AAEON is made to the purpose of the laboratory or the factory facility, you can be assured that every purchase in AAEON will provide the reliability and stability of operation. Your satisfaction is our primary concern. Here is a guide for AAEON's customer services. Ensure you get the full benefits of our services, please follow the instructions below step by step.
Technical Support
We require you to get the maximum performance from your products. If you run into technical difficulties, we’ll be here always for you. For the most frequently asked questions, you can easily find solutions in
your product documentation. The guide is specified detailedly so please refer to it first. Therefore, we suggest strongly that you can read it before asking for a customer service over the phone. If you still cannot find the answer, gather all questions you can think of and have the product at hand before giving a call to your dealer. All dealers of AAEON are well-trained and ready to provide you as many supports as we can. Based on the customer service we’ve encountered until now, most of problems are minor and able to be
PER-C10L Quick Installation Guide 3
Mini-PCI Ethernet Module PER-C10L
easily solved over the phone. In addition, free-charged technical support is available from AAEON engineers in the office time. We are always pleased to give advice regarding to any installation and operation for AAEON products.
PER-C10L Quick Installation Guide 4
Mini-PCI Ethernet Module PER-C10L
Ordering Information
TF-PER-C10L-A10
Mini-PCI 10/100Base-TX Ethernet Module w/ Realtek 8100C
TF-PER-C10L-A10-01
Mini-PCI 10/100/1000Base-TX Ethernet Module w/ Realtek 8110SC
TF-PER-C10L-A10-02
®
Mini-PCI 10/100Base-TX Ethernet Module w/ Intel
TF-PER-C10L-A10-03
Mini-PCI 10/100/1000Base-TX Ethernet Module w/ Intel
TF-PER-C10L-A11
82551QM
®
82541GI
Mini-PCI 10/100-TX Ethernet Module w/ Realtek 8100C (low profile pin header, 90D DIP Type)
PER-C10L Quick Installation Guide 5
Mini-PCI Ethernet Module PER-C10L
Packing List
1 TF-PER-C10L Mini-PCI Ethernet Module
1 LAN Cable
1 Quick Installation Guide
1 CD-ROM for QIG (in PDF format) and drivers
PER-C10L Quick Installation Guide 6
Mini-PCI Ethernet Module PER-C10L
Content
A Message to the Custom er .............................................................2
Product Warranty..............................................................................3
Ordering Information......................................................................... 5
Packing List ......................................................................................6
1.1 Feature ....................................................................................... 8
1.2 Specification................................................................................9
1.3 Location of Jumper and Connector ..........................................10
1.4 Mechanical Drawing................................................................. 11
1.5 10/100Base-TX Ethernet Connector (CN1)..............................12
1.6 10/100/1000Base-TX Ethernet Connector (CN1).....................12
1.7 LED pin (CN2) ..........................................................................12
PER-C10L Quick Installation Guide 7
Mini-PCI Ethernet Module PER-C10L
1.1 Feature
Mini-PCI Type III Interface
Single 10/100Base-TX or 10/100/1000Base-TX Ethernet
Port
Supports Wake-On-LAN Function
PER-C10L Quick Installation Guide 8
Mini-PCI Ethernet Module PER-C10L
1.2 Specification
Chipset Intel® 82551QM / Realtek 8100C For 10/100Base-TX
®
82541GI / Realtek
Intel 8110SC
For 10/100/1000Base-TX
Speed Supports 10Mbps/ 100Mbps/ 1000Mbps, Auto-negotiation
Function IEEE 802.3x compliant flow control support, IEEE 802.1Q
Virtual LAN, supports Wake-On-LAN function
Power Management Supports ACPI, PCI power Management
Operating Temperature 32 ℉ ~140 ( 0~ 60)
PER-C10L Quick Installation Guide 9
Mini-PCI Ethernet Module PER-C10L
1.3 Location of Jumper and Connector
CN1 CN2
For Intel
CN1 CN2
For Realtek
For Realtek (CN DIP Type)
PER-C10L Quick Installation Guide 10
CN1
CN2
Mini-PCI Ethernet Module PER-C10L
1.4 Mechanical Drawing
5
3
7
6
.
.
9
3
5
5
50.95
48.45
36.47
For Intel
0.00
0
0
.
0.00
0
0
0
.
0
For Realtek
3
6
.
3
5
5
7
.
9
5
50.95
48.45
36.47
51.29
59.75
50.95
48.32
36.42
For Realtek (CN DIP Type)
0.00 .00
PER-C10L Quick Installation Guide 11
Mini-PCI Ethernet Module PER-C10L
1.5 10/100Base-TX Ethernet Connector (CN1)

Pin Signal Pin Signal

1 OMDI0+ 2 OMDI0­3 OMDI1+ 4 OMDI1­5 GND 6 GND 7 N.C. 8 N.C. 9 N.C. 10 N.C.
1.6 10/100/1000Base-TX Ethernet Connector (CN1)
Pin Signal Pin Signal
1 OMDI0+ 2 OMDI0+ 3 OMDI1+ 4 OMDI1­5 GND 6 GND 7 OMDI2+ 8 OMDI2­9 OMDI3+ 10 OMDI3-
1.7 LED pin (CN2)
Pin Signal Pin Signal
1 Link / Active LED (+) 2 Link / Active LED (-) 3 Speed 100Base-TX LED (+) 4 Speed 100Base-TX LED (-) 5 Speed 1000Base-T LED (+) 6 Speed 1000Base-T LED (-)
PER-C10L Quick Installation Guide 12
Mini-PCI Ethernet Module PER-C10L
Below Table for China RoHS Requirements
产品中有毒有害物质或元素名称及含量
AAEON Main Board/ Daughter Board/ Backplane
有毒有害物质或元素
部件名称
印刷电路板
及其电子组件
外部信号
连接器及线材
O:表示该有毒有害物质在该部件所有均质材料中的含量均在
SJ/T 11363-2006 标准规定的限量要求以下。
X:表示该有毒有害物质至少在该部件的某一均质材料中的含量超出
SJ/T 11363-2006 标准规定的限量要求。
备注:此产品所标示之环保使用期限,系指在一般正常使用状况下。
(Pb)汞 (Hg)镉 (Cd)
×
×
六价铬
(Cr(VI))
多溴联苯
(PBB)
多溴二苯醚
(PBDE)
PER-C10L Quick Installation Guide 13
Loading...