A4Tech XG760 User Manual

X7 Oscar Wireless Gaming Mouse

Model: XG-760

www.a4tech.com

THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.

Federal Communications Commission Requirements

The equipment has been tested and found to comply with the limits for Class B Digital Device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruction, may cause harmful interference to radio communication. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

●Reorient of relocate the receiving antenna.

●Increase the separation between the equipment and receiver.

●Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ●Consult the dealer or an experienced radio/TV technician for help.

THE CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE PARTY RESPONSIBLE FOR COMPLIANCE COULD VOID THE USER'S AUTHORITY TO OPERATE THE EQUIPMENT.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1)This device may not cause harmful interference, and receiver.

(2)This device must accept any interference received, including interference that may cause undesired operation.

FCC Radiation Exposure Statement

The equipment complies with FCC radiation exposure limits set forth for uncontrolled equipment and meets the FCC radio frequency (RF) Exposure Guidelines in Supplement C to OET65. The equipment has very low levels of RF energy that it is deemed to comply without testing of specific absorption ratio (SAR).

1

Mouse Button Diagram

Hardware Installation

1). Connect the Multi-link receiver

Take out the Multi-link receiver from bottom of the mouse and connect it to your computer or Notebook.

2). Insert the batteries

Push down the mouse cover to open the battery cover and insert the supplied batteries. Please make sure the positive

(+) and negative (-) ends of the battery match the polarity indicators inside the battery compartment.

3). Turn on your Mouse

Push the power switch to ON position and turn on your mouse. >>Then LED light at the bottom of the mouse is on immediately.

Software Installation

X7 Oscar mouse editor offers 2 flexible ways to install the driver, Normal Installation and Mobile Execution. X7 Oscar mouse editor main program has a special feature that it can be executed directly without the need to install the software to Windows system. This is convenient when you are using a public computer and installing mouse driver to the system is prohibited or restricted. In such circumstances, you do not need to install the mouse driver, but just run the X7 Oscar’s main program directly from your storage device, e.g., a memory stick.

Normal Installation

1). Uninstall any mouse software on your system.

2). Insert enclosed CD to start installation and follow the on-screen instructions to finish the software installation. You may manually double click the “auto-run” program if execution does not automatically start.

3). The shortcut icon "" will appear on your desktop screen, and then you have successfully installed the software. (Otherwise, installation is failed and you have to remove the software and re-install.)

To remove the software, follow the below steps:

Go to START>> PROGRAMS >>A4TECH Software >> "X7 Oscar Mouse Editor" >> "Uninstall X7 Oscar Mouse Editor", see figure on the right.

2

X7 Oscar Mouse Editor

Mode Number:

Select a mode number to edit.

Mouse Button Definition:

Display current mouse button settings or setup new settings to mouse buttons.

Save new settings to receiver and apply the new settings immediately.

Main Menu of XG Oscar

3

Mode Name/Select:

Name a new mode or select

modes to use.

Description of Reminder:

Enter short description here for each button setting, which will be displayed later as the reminder on the screen.

Button Settings and Relevant Functions

Click any “button definition area” on the main menu; you will see the function listing as shown below. According to your preference, you may select one of them as the button setting. You also can enter a short description on the “Description of reminder” area, which will be displayed on the screen when it is activated as the reminder.

No Settings

There is no button setting being defined.

Keyboard...

You may setup the mouse button to simulate a keyboard's keystroke, or a key combination with "Win", "Ctrl", "Shift" and "Alt", then followed with any keystroke on the keyboard, and then assign it to the designated mouse button.

Mouse

Except mouse left button, you may setup any of mouse buttons to be one of "mouse left button, mouse right button, mouse middle button, mouse 4th button, mouse 5th button, wheel up and wheel down".

Open a file

One click to open a program file or a document. You may setup any of mouse buttons of 2, 3, 4, 5, 6, wheel up(UP) and wheel down(DN) with "Open a File" function.

Usage:
1). Select "Open a file" from the pull-down button menu as figure A shows.
2). A screen of file listings will pop up as figure B shows.
3)	Select one of the files that you would open it with the associated button and click "Open".
4)	Now you can see the file you selected has been assigned to the button.
5)	Click "Apply" to save the new button setting.
Example:		Figure A
While in the session of a meeting or teaching, it is embarrassing to keep others waiting due to searching for a document, or
look up for a program or a shortcut. With "Open a File" function, you may have better way to resolve this issue. By setting
up each button in association to the document, program or shortcut, all you need to do is to shift to the mode and click each
mouse button to open all the files instantly. You may also open an on-line reminder to check each mouse button
association details.
		Figure B

4

Memo

See below "Memo" section in more details.

One click to open the Memo screen and list out all the current button settings as the reminder. You may setup any of mouse buttons of 2, 3, 4, 5, 6, wheel up(UP) and wheel down(DN) with "Memo" function.

Usage:
1). Select "Memo" from the pull-down button menu as figure C shows.
2). Click "Apply" to save button setting.
	Figure C
Example:
This function is useful during the session of a meeting or teaching, when you are not very sure which button is associated
with the function you need.
Click the "Memo" button will bring the "Memo" screen as figure D shows. Now you can check each button setting and
activate them immediately.
For instance, the teacher can open all the handout documents in seconds by clicking the button in association with the
mouse buttons.	Figure D
The Memo function is available for mouse button 2, 3, 4, 5, 6, Wheel up(UP) and Wheel down (DN).
Office Sets

You may setup any one of Office command sets such as: "Zoom In, Zoom Out, Paste Text, Double Click and Treble Click" to the mouse buttons. Zoom In/Out: One click to perform zoom in or zoom out function, applicable to CAD, ACDSee, Windows or text editing programs.

Paste Text: One click to perform "Select, Copy & Paste" texts, it turns office jobs can never be so simple.

Key Combination

Quick access to Office commands of key combinations, such as: Cut, Copy, Paste, Delete, Search, Select All, Redo, Undo, New File, Open File, Save File, Print...etc.

Multimedia

Quick access to Multimedia commands, such as: Media Player (Open), Previous, Next, Stop, Play/Pause, Mute, Volume+, Volume-...etc.

Internet

Quick access to usually used Internet commands, such as: Backward, Forward, Stop, Refresh, Search, My Favorite, Web Browser, E-mail...etc.

System

Quick access to Windows commands, such as: Open Calculator, Open My Computer, Sleep, Power Off...etc.

Gesture 16-in-1

This 16-in-1 mouse utility offers 16 directions to draw the lines with the

mouse and the preset commands will be executed immediately. Note that

5

this gesture function is only available for mouse button and . See more details on the Gesture 16-in-1 section.

Screen Shot

Button / / can be set as "Screen Shot". One click to take a screenshot of a chosen area of the screen or video and quickly share with others.

Screenshot Usage

Configure your screenshot button:

1.Open the Main Menu and choose any of mouse buttons , or as “Screen Shot” function.

2.Select “Screen Shot” from the pull-down button m enu(Shown as right).

3.Click "Apply" to save the setting

Take a screenshot

Press the screenshot button and move the mouse to choose the area you want to capture (A dashed pane will show up), then release the button to take a screenshot.

Paste

Press "Ctrl + V" on the keyboard to paste your screenshot in any of your applications!

Edit/Save

Save or edit the captured image in paint software

Screen Shot – Ideal for office and internet uses

One click to take a screenshot of a chosen area of the screen or video and quickly share with others.

Select Macro File

There are many useful macro functions you may choose from, including commands for PowerPoint(PPT) / Media Center Edition(MCE) / Gaming(CS) ...etc. They are backward compatible with X7 Oscar file format, and can be downloaded from the website: http://www.x7.cn.

DPI Setting

Customizable and independent 3,200 DPI resolution for each X and Y axes.

XG Oscar offers customizable and independent resolution for each X and Y axes that best suits various LCD resolutions, in particular, it is crucial for some game plays.

6