3 PLUS L38B Product Manual

L38B Product Manual

Version

Date

Author

Page No.

Update details

1.0

2015-11-30

Zhong Da

Premier release

Contents

Usage environment

Operation temperature

-20°C to 55°C。

Waterproof functionality classification

Day-to-day waterproof functionality.
The band can be used during daily ablution or in midst of rain, so long as only the

surface is exposed to the water drops and no water pressure is exerted on the
device.

Battery

3 days with regular utilization.

Charging

Before first usage, please charge the band for 2 hours.

Connecting charger

1. Connect the charger with the band.

2. Make sure that the band is in contact with the charger.

3.

Insert the micro-USD cable into the band charging stand.

Connect the USD cable with a power source.

A “Charging” icon will be shown on the screen. When the charging is completed,
a “Full” icon will be shown on the screen.

A full charge will take only one and half hours. When the remaining charges are
not sufficient, a “Low charges” icon will be shown on the screen.

Getting APP

Getting band APP：
To setup your band with a mobile device, you must first get the band APP.
Search for

3PLUS ELITE

in the App Store or the Android store. Download and

install the APP in your mobile device.

Connecting APP

1. Turn on the Bluetooth on your mobile device;

2. Open the 3PLUS ELITE App on your mobile device.
If you are a new member, please register or login with an existing account. Click
“Setup” after entering your personal information;

3. Make sure that the band is located nearby. Select 3PLUS ELITE from your Bluetooth
menu;

4. A connection request will be shown on your mobile device.

Tap on the screen to accept the connection;

5. When the band is connected successfully, both your band and mobile device will
receive a notification.

If the connection is not successful, please repeat the same steps.
The connection is a one-time process. If you would like to connect the band with
other account, you must cancel the existing connection first.

Wearing the device

Wearing the device

Button up the band
Wear the band on your wrist. Fasten it up. Push the buckle through the button

opening.

Recommendation:
Add a few drops of water on the wrist band opening will make the buckling up

easier.

Booting up the device

Double tapping the display sensor area will boot up the screen.
The band will only respond when the specific sensor area is tapped.
The band screen will go off when not in use. Double tap the screen to
boot up the device.

To make sure that the band will respond accurately to your tapping, we recommend that
you use your finger tip instead of your finger nail.

Screen operation

All screen operations can be done by touching the screen with your finger tip.

Slide left or right to change the screen and menu. Slide your finger horizontally on the
screen surface.

Tips:
If you are not sure what to do on a specific screen, try swiping left or right to switch to
another interface.

Main Menu

Time, date ，

Calories ，

Distance ，

Steps ，

Sport duration ，

Heart rate ，

Timer ，

Slide left or right to change the interface.

Clock interface

Time interface,

Time and date on your band will be automatically synchronized with the connected
mobile device.

You can also setup your preferred time and date manually through the settings of 3PLUS
ELITE APP.

Please make sure that the battery charges on your band is sufficient to avoid resetting of
the time.