3M VEN351-K User Manual

3M™ Water Filtration Products

Vending Applications

VEN Series Sanitary Quick Change Systems

The VEN Series of 3M™ Water Filtration Products are designed to provide improved water quality and seamless beverage service specifically for vended beverages. Cup quality is especially important in this application to ensure repeated customer satisfaction.

The VEN Series interconnect and head designs ensure the use of high-quality replacement cartridges, time after time.

Welded 3/8” John Guest connections are compatible with plastic and copper connections.

The integral mounting bracket makes installation quick and easy.

The ramped interconnect completely disconnects the cartridge from the filter head with only a 1/4 turn, making this an extremely easy cartridge change-out — especially in tight areas behind the machine.

A built-in shut off valve allows cartridge changeouts without shutting off the incoming water supply.

The sanitary quick change design allows for quick and easy cartridge change-outs and minimizes contamination of the filtration media.

A True Choice For Improved Water Quality

All premium-quality VEN Series products provide:

• Chlorine taste and odor reduction — makes the difference you can taste

• Sediment reduction — helps improves beverage clarity

• Built-in KDF® media — reduces unscheduled service calls due to water borne slime build-up and hard scale build-up

• Ensured system function without activation

Choose the system that is right for your needs:

Drinking Water Quality

VH3/VEN350-K Capacity: 3,500 gallons (13,249 liters) or 56,000 cups (8 oz. vend.) Flow Rate: 1 gpm (3.8 lpm)

Features Product Benefits

•

Graded density, compressed carbon block • Helps reduce the health effects associated with filterable cysts

• 0.5 micron cyst, turbidity, fine sediment reduction • Maximizes the effective life and chlorine reduction capability of the system while reducing fine particles associated with cloudy beverages

• KDF Media

Beverage Quality Water

VH3/VEN351-K Capacity: 3,500 gallons (13,249 liters) or 56,000 cups (8 oz. vend.) Flow Rate: 1 gpm (3.8 lpm)

Features Product Benefits

•

1 Micron graded density Multi-composite carbon block • Traps and holds particles over the life of the filter for consistent

beverage clarity

• Increased contact time reduces chlorine taste and odor to over 96%

• KDF Media

Maintenance Quality Water

VH3/VEN355-K Capacity: 3,500 gallons (13,249 liters) or 56,000 cups (8 oz. vend.) Flow Rate: 1 gpm (3.8 lpm)

Features Product Benefits

•

5 micron, graded density • Helps protect equipment from the effects of water conditions

Multi-composite carbon block with heavy dirt load

• Helps extend the usable life of the filter

• Helps reduce maintenance caused by clogged valves and orifices

• KDF Media

Maximum six month changeout required.

Quotation for Specified 3M™ Water Filtration Products

Specified Model #

3.6 in.

(9.1 cm)

Part #

Price Quoted

Installed on what equipment

Quantity Required

Applications/Specifications

Model# Part#

VH3/

56092-04

56092-08

56092-11

VEN350-K

VEN351-K

VEN355-K

System

Dimensions in (cm)

3.6 W x 4.2 D x 10.6 H (9.1 x 10.7 x 26.9)

Replacement

Cartridge

VEN350-K 56093-07 X X X X X 0.5

VEN351-K 56093-15 X X X 1

VEN355-K 56093-21 X X X 5

These installation tips are for informational purposes only and are not intended to be used as actual installation instructions.

CAUTION: To reduce the risk of property damage due to water leakage, read, follow, and understand the Installation and Use instruction guide BEFORE installation and use of this system.

• Shut off downstream equipment prior to installation of the system.

• Choose mounting location to support full system weight when operating.

• Comply with all state and local plumbing codes.

• Do not exceed operating parameters for temperature or pressure. System max- imum operating pressure of 90 psi (620.5 kPa) and operating temperature of 100°F (38°C). If pressure exceeds 90 psi, a pressure limiting valve must be installed.

• Do not install outdoors.

• For commercial use on cold water line only.

• Change cartridge at least every 6 months.

• Screw-tighten the sump to the head until snug, regardless of ﬁ nal label orientation.

• Systems certiﬁ ed for Cyst reduction may be used on disinfected water that may contain ﬁ lterable cysts. EPA Establishment No. 070595-CT-001

Part#

Chlorine

Taste

and

Odor

Scale

Inhibition

8.7 in.

(22.1 cm)

(

4.2 in.

(10.7 cm)

Sediment Reduction

Cyst

Reduction

Turbidity

Reduction

Particle

Reduction

(Microns)

Capacity

Flow Rate

Gals.

(Liters)

3,500

(13,249)1(3.9)

3,500

(13,249)1(3.9)

3,500

(13,249)1(3.9)

gpm (lpm)

Carton Weight. lbs (kg)

19.3 (8.8)

Carton

Dimensions

cu. ft. (cu.

m.)

1.34 (0.4)

WARNING: Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system.

CUNO Incorporated recommends regularly scheduled maintenance and replacement of the ﬁ lter cartridge(s) in order for the product to perform as advertised/sold.

CUNO shall not be liable for system failures due to improper maintenance.

Refer to the PDS sheet for the certified claims.

Case

Qty

Five Year Warranty

CUNO Incorporated defects in materials and workmanship. This warranty, together with any and all warranties implied by law, shall be limited to a period of ﬁ ve (5) years from the date of original purchase by the consumer. This warranty does not apply to failures that result from abuse, misuse, alteration or damage not caused by CUNO. This warranty is subject to exclusions and limitations. Please refer to the Warranty Card provided with the product for details. This warranty does not apply to cartridge life. See 3M™ Water Filtration Products Price Book for Terms and Conditions for details about cartridge life.

Distributed By:

a 3M company

CUNO Incorporated

400 Research Parkway

© 2007 3M Company. All rights reserved. 3M and CUNO are trademarks of 3M Company used under license. NSF is a trademark of NSF International. KDF is a registered trademark of Zero Technologies Incorporated,

LITOCS020 1210P

Meriden, CT 06450, USA

Toll Free: 1.888.218.CUNO

Worldwide: 203.237.5541

Fax: 203.238.8701

www.cunofoodservice.com