3M™ Sole Grounder
Sole Grounder - Full Coverage
This grounder provides maximum floor contact by covering both the ball of the foot and the heel. Three elastic
straps create a comfortable secure fit. This quality grounder is tested for electrical performance and is lot
numbered for QC traceability. 3M uses time-tested construction techniques including computer controlled
stitching, riveting, die cutting, and heat cutting to ensure consistent performance.
Standards
Meets the requirements of ansI/esd s-20.20, eIa 625, MIl-sTd-1686, and MIl-HdBK-263.
Specifications
resistor: 1 or 2 megohm
Color: Black
ribbon: Multi-strand, carbon suffused nylon on polyester,
sewn in sinusoidal pattern to provide side to side
conductivity.
Hook and Loop: 3/4” Black
d-ring: 2
elastic strap 3/4” Black
sole exterior: <105 ohms
1 megohm
resistor
18” conductive ribbon.
elastic strap
Front view
elastic Hook and Loop
d-rings for complete adjustability
side view
3-layer sole
for durability
Part Numbers
sg1M-Xl extra large sole grounder, 1 meg resistor
sg1M-l large sole grounder, 1 meg resistor
sg1M-sM small/Medium sole grounder, 1meg resistor
sg2M-l large sole grounder, 2 meg resistor
sg2M-sM small/Medium sole grounder, 2meg resistor
p r o d u c t
Sole Grounder - Full Coverage
p r o d u c t
Full Coverage sole grounder
i t e m n u m b e r
s e e a b o v e
See 3M Data Sheets for these
related items:
3M™ Foot grounder Tester
3M™ Floor Mats
d a t a
d at a s h e e t
1131-a
s h e e t
3M Electronic Solutions Divsion
6801 River Place Blvd.
Austin, TX 78726-9000
us and Canada: 866-722-3736
Fax: 866-722-3735
Intl: 919-718-0000; Fax: 919-774-8174
email: 3Mstaticinfo@mmm.com; www.3M.com/static © 2008
How Foot Grounders Work
Foot grounders discharge static from a person to ground by connecting the person to a grounded walking surface. a conductive ribbon
placed inside the wearer’s shoe or sock makes electrical contact with
the skin through perspiration. The ribbon is joined to a resistor which
limits current should accidental exposure to electricity occur. The other
end of the resistor is joined to a conductive sole. This sole contacts a
grounded esd floor mat or esd flooring system. Foot grounders must
be worn on both feet to maintain ground contact while walking.
3M is a trademark of 3M Company.
all other trademarks herein are the property
of their respective owners.