3M Shrink DIP User Manual

.070"

Shrink

DIP

DIP Sockets

• For DIPs with .070" (1.78 mm) lead spacing

• Pin counts from 28 through 90 leads

• Lever actuated zero insertion force mechanism

• Socket contact point of .090" (2.29 mm) below top  surface of socket

TS-0366-12 Sheet

Date Issued: June 20, 2001

1 of 2

Physical

Flammability:

Electrical

Curr

Insulation Resistance:

ithstanding V

Environmental

Operating T

emperatur

Insulation

Material: Glass

Color: Green

Marking:

Contact

Material:

Plating:

ent Rating:

oltage:

e Rating:

Filled Polysulfone

UL 94V

3M Logo & Part Number Identifier

Beryllium Copper Gold Flash over 50 m" (1.3 mm) Nickel

1 Amp > 1 ¥ 109 W at 500 Vdc 1000 V

- 55°∞C to +150°

-0

rms at Sea Level

∞C

Mechanical

When used as a test socket at room temperature 24°

3M Electronic Handling and Protection Division

6801 River Place Blvd. Austin, TX 78726-9000

∞

C the socket will last 20,000 actuations.

For

technical, sales or ordering information call

or visit our website: http://www.3M.com/ehpd

800-328-0411

.070"

Shrink

DIP

DIP Sockets

Contact

Quantity

A B C D E

Dimensions

28 1.60 [ 40.5] 1.42 [ 36.1] .70 [ 17.8] .40 [ 10.16] .91 [ 23.14]

1.73 [ 44.0 ] 1.56 [ 39.6 ] .70 [ 17.8 ] .40 [ 10.16 ] 1.05 [ 26.67 ]

42 2.10 [ 52.9] 1.90 [ 48.5] .90 [ 22.9] .60 [ 15.24] 1.40 [ 35.60 ]

56 2.57 [ 65.4] 2.40 [ 61.0] .90 [ 22.9] .60 [ 15.24] 1.89 [ 48.01]

64 2.90 [ 72.5] 2.68 [ 68.0] 1.10 [ 28.3] .80 [ 20.70] 2.20 [ 55.18]

90 3.77 [ 95.7] 3.59 [ 91.3] 1.23 [ 31.3] .90 [ 22.86] 3.08 [ 78.32]

2X .13

[3.3]

2XX-XXXX-00

TEXTOOL

PAT

. NO 3763455

2X Dia. .080 ± .002 [ 2.00 ± .05 ] (Clearance for mounting screw)

.09

]

[2.2

Ref

Tolerance

Dimension

Tolerance

inch

(mm)

.00

(.0)

± .010 ±

(±

.25)(± .13)

.000

(.00)

.005

.020 [0.51] Standoffs

.46

1.6 ]

.070

.12

[3.3 ]

Contact

Tail

Length

[1.78 ]

Pitch

Ordering Information

Socket

228-1290-00-0602J 28 228-1290-XX-0602J

232-1291-00-0602J 32 NOT AVAILABLE

242-1293-00-0602J 42 242-1293-XX-0602J



1

256-1292-00-0602J 56 NOT AVAILABLE

264-1300-00-0602J 64 264-1300-XX-0602J

290-1294-00-3302J 90 290-1294-XX-0602J

.014 x .030

[ 0.36 ] [ 0.76 ]

Contact T

Part Number

ails

.46

1.7 ]

Closed

.49

[12.4]

.41

[10.4]

Contact Quantity Mating Receptacle Part Number

Note:

1

This socket is available only in black polyetherimide plastic.

Electronic Handling and Protection Division

6801 River Place Blvd. Austin, TX 78726-9000

Contact Tail Length: XX = 09 Solder Tail w/ flanges = 29 Solder Tail w/out flanges

For

technical, sales or ordering information call

or visit our website: http://www.3M.com/ehpd

TS-0366-12 Sheet

2 of 2

800-328-0411