3M SF165 User Manual
3M™ Water Filtration Products
SPEC#
QUANTITY
application:
SCALE CONTROL
model:
SF165
The 3M Purification Inc. Water Filtration Products SF165 ScaleGARD™ HT System helps provide consistent Recipe Quality Water™
with reduced sediment and chlorine taste and odor. Operating cost
savings from the controlled and metered addition of scale-inhibitors
reduces the ability of calcium and magnesium to precipitate as hard
scale in both high and low temperature applications, including ice
machines, coffee, tea, espresso brewers and steamers*.
• ScaleGARD HT, SF165 combines chlorine taste and odor reduction
withs ediment reductions and helps protect against the effects of
scale formation at flow rates to 3.34 gpm (12.6 lpm) for 35,000
gallons (132,000 liters).
PRODUCT BENEFITS
• Advanced Integrated Membrane Pre-Activated Carbon Technology
(“IMPACT”) filtration media combines a membrane in series with
premium activated carbon to provide superior throughput and cartridge life.
• Reduced sediment and chlorine taste and odor for equipment protection and great tasting hot and cold beverages and ice.
• A forced-feed orice carefully controls and meters the addition of a
proprietary scale inhibitor to reduce scale build-up on heating coils.
• Superior scale reduction performance in equipment from ice machines
to equipment heating water to temperatures over 200°F (93°C).
• Sanitary Quick Change (SQC) HF65 encapsulated cartridge design
allows for fast and easy change-outs with a 1/4 turn while mini-
mizing the possibility of leakage and contamination.
• 3/4” FNPT inlet and outlet ports allow direct or easily adaptable
connections to existing plumbing lines.
• FDA CFR-21 and/or NSF compliant materials.
• System includes a pressure gauge, inlet shut-off valve and outlet
check valve for simple installation and operation.
PRODUCT SPECIFICATIONS
Model
Number
SF165 56186-01
Part
Number
Reduction Claims
Sediment, Chlorine
Taste and Odor, Scale
Micron
Rating
3
Capacity
35,000 gallons
(132,000 liters)
Service
Flow Rate
3.34 gpm
(12.6 lpm)
Application
Normal to Hard
Water
* Periodic acid de-liming of heating coils is recommended for steamer applications.
Replacement
Cartridge
HF65 (56134-07)
HF8-S (55821-06)
Cartpak (56138-11)
Sizing
Ice: Cubers to 1,200 lbs. (544 kg)
Flakers to 2,400 lbs. (1,089 kg)
Coffee Brewers and Steamers to demand
flow rates of 3.34 gpm (12.6 lpm)
SF165
14 7/8"
SPEC#
QUANTITY
MODEL NUMBER
PART NUMBER
17.8 cm
7"
11 5/8"
29.5 cm
37.8 cm
OUTLET
17 1/2"
44.5 cm
3M Purification Inc. Water Treatment
Products
PHYSICAL SPECIFICATIONS
• System includes a manifold with built-in pressure gauge, inlet water shut-off valve,
outlet check valve, mounting bracket, lter cartridge and scale-feeding system.
• Inlet and outlet plumbing connections are 3/4” FNPT.
• Filter cartridges are o-ring seal type.
• System maximum operating pressure of 125 psi (862 kPa) and operating temperatures of 100°F (37.8°C).
• Recommended service ow rate is up to 3.34 gpm (12.6 lpm)
• Filter cartridge incorporates carbon block media protected by a pleated pre-lter
membrane.
• All wetted parts and media are FDA CFR-21 compliant.
• Cartridges are sanitary in design, requiring no contact with the lter media during
cartridge change-out.
• Filter cartridges requires no pre-activation.
• Shipping Weight: 6 lbs. (2.7 kg).
• Operating Weight: 12 lbs. (5.4 kg).
IMPORTANT: INSTALLATION TIPS
2 5/16" (5.87 cm) MINIMUM
DISTANCE REQUIRED TO
REMOVE CARTRIDGE
WARNING: To reduce the risk associated with the ingestion of
contaminants:
• Do not use with water that is microbiologically unsafe or of unknown
quality without adequate disinfection before or after the system.
3M Purification Inc. recommends regularly scheduled maintenance and
replacement of the filter cartridge(s) in order for the product to perform as
advertised/sold. 3M Purification shall not be liable for system failures due
to improper maintenance.
LIMITED WARRANTY
3M Purification Inc. warrants this Product will be free from defects in material and manufacture for five (5) years from the date of purchase: The filter cartridge or filter membrane is warranted to be free from defects in material and manufacture for one (1) year. This warranty does not cover failures resulting from abuse, misuse, alteration or damage not caused by 3M Purification
Inc. or failure to follow installation and use instructions. No warranty is given as to the service life of any filter cartridge or membrane as it will vary with local water conditions and water
consumption. 3M PURIFICATION INC. MAKES NO OTHER WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OR CONDITION
OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR ANY IMPLIED WARRANTY OR CONDITION ARISING OUT OF A COURSE OF DEALING, CUSTOMER OR USAGE OF TRADE. If
the Product fails to satisfy this Limited Warranty during the warranty period, 3M Purification Inc. will replace the Product or refund your Product purchase price. This warranty does not cover
labor. The remedy stated in this paragraph is Customer’s sole remedy and 3M Purification Inc.’s exclusive obligation. For additional information, see the entire Limited Warranty located
in the product Installation and Operating Instruction Manual.
Limitation of Liability: 3M Purification Inc. will not be liable for any loss or damage arising from this 3M Purification Inc. product, whether direct, indirect, special, incidental, or c
onsequential, regardless of the legal theory asserted, including warranty, contract, negligence or strict liability. Some states and countries do not allow the exclusion or limitation of incidental
or consequential damages, so the above limitation or exclusion may not apply to you.
These installation tips are for informational purposes only and are not intended to be
used as actual installation instructions. CAUTION: To reduce the risk associated with
property damage due to water leakage:
• Read and follow Use Instructions before installation and use of this system.
• Installation and use MUST comply with all state and local plumbing codes.
• Protect from freezing, remove filter cartridge when temperatures are expected to drop
below 40°F (4.4°C).
• Do not install on hot water supply lines. The maximum operating water temperature
of this lter system is 100°F (37.8°C).
• Do not install if water pressure exceeds 125 psi (862 kPa). If your water pressure
exceeds 80 psi (552 kPa), you must install a pressure limiting valve. Contact a plumbing
professional if you are uncertain how to check your water pressure.
• Do not install where water hammer conditions may occur. If water hammer conditions
exist you must install a water hammer arrester. Contact a plumbing professional if you are
uncertain how to check for this condition.
• The disposable lter cartridge MUST be replaced every 12 months, at the rated capacity
or if a noticeable reduction in flow rate occurs.
3M Purification Inc.
400 Research Parkway
Meriden, CT 06450 U.S.A.
Toll Free: 1.800.243-6894
Worldwide: 203.237.5541
Fax: 203.630.4530
www.3Mpurification.com
ScaleGARD and Recipe Quality Water are trademarks of 3M Company used under license.
3M is trademark of 3M Company.
© 2011 3M Company. All rights reserved.
Please recycle. Printed in U.S.A.
LITFS313 0811B
70-0201-9437-2
Loading...