3M CS-14 User Manual

Retrofit for Hot Beverage

Applications

Retrofit Cartridges for Competitive Systems

The 3M™ Water Filtration Products are carefully designed to help protect beverage equipment, provide consistent beverage quality, and helps ensure seamless beverage service.

Retrofit cartridges upgrade the performance of existing competitive systems with the same premium performance and design characteristics as the Series 500 and 700.

The cartridge design offers simple changeouts while minimizing corrosion potential often seen in metallic housings.

The sanitary quick change design helps minimize contamination of the filtration media, while the compact footprint allows the unit to be installed snugly behind the beverage unit or neatly under a cabinet.

The housing is durable and shatter-resistant, minimizing the potential for leaks.

Units are FDA, CFR-21 compliant for use in all food and beverage applications and are 3rd party certified for design and performance.

Three (3) premium carbon technologies are available for differing water conditions.

Maximum Protection

CS-24 Capacity: 2,000 gallons (7,571 liters) or 266 cups/day*

Features Product Benefits

• Graded density, compressed carbon block • Does not require activation

• Extends contact time for maximum chlorine and sediment reduction

• 0.5 micron cyst, turbidity, fine sediment reduction • Extended protection and long life

• Chlorine taste and odor reduction • Enhances beverages quality over the life of the filter

• Built-in scale inhibition • Protects equipment from the harmful effects of hard water

•

Helps provide seamless beverage service

General Purpose

CS-14 Capacity: 2,500 gallons (9,464 liters) or 333 cups/day*

Features Product Benefits

• Graded density, multi-compressed carbon block • Does not require activation

•1 micron sediment reduction • Enhances beverage clarity

• Chlorine taste and odor reduction • Enhances beverages quality over the life of the filter

• Built-in scale inhibition • Protects equipment from the harmful effects of hard water

Problem Water

CS-64 Capacity: 2,400 gallons (9,085 liters) or 320 cups/day*

Features Product Benefits

• Built-in 5 micron prefiltration • Suitable for water conditions with heavy dirt load

• Reduces maintenance caused by clogged valves and orifices

• Chlorine taste and odor reduction • Enhances beverage quality over the life of the filter

• Built-in scale inhibition • Protects equipment from the harmful effects of hard water

•

Helps provide seamless beverage service

•

Helps provide seamless beverage service

Quotation for Specified 3M™ Water Filtration Products

a 3M company

Specified Model #

Part #

Price Quoted

Installed on what equipment

Quantity Required

Applications/Specifications

Model#

CS-24 55896-07 11 1/8 x 3 3/8

CS-14 55896-05 11 1/8 x 3 3/8

CS-64 55891-05 11 1/8 x 3 3/8

Part#

System

Dimensions

in (cm)

(28.3 x 8.6)

Replacement

Cartridge

Same Same X X X X X 2,000

Same Same X X X 2,500

Same Same X X X 2,400

Part#

Chlorine

Taste and

Odor

Scale

Inhibition

Sediment Reduction

These installation tips are for informational purposes only and are not intended to be used as actual installation instructions.

CAUTION: To reduce the risk associated with property damage due to water leakage: To reduce the risk associated with property damage due to water leakage:

• Read and follow Use Instructions before installation and use of this system.

• Installation and use MUST comply with all state and local plumbing codes..

• Protect from freezing, remove ﬁlter cartridge when temperatures are expected to drop below 40° F (4.4° C).

• Do not install on hot water supply lines. The maximum operating water temper ture of this ﬁlter system is 100°F (38°C).

• Do not install if water pressure exceeds 125 psi (862 kPa). If your water pressure exceeds 80 psi, you must install a pressure limiting valve. Contact a plumbing professional if you are uncertain how to check your water pressure.

• Do not install where water hammer conditions may occur. If water hammer conditions exist you must install a water hammer arrester. Contact a plumbing professional if you are uncertain how to check for this condition.

• The disposable ﬁlter cartridge must be replaced every 6 months, at the rated capacity or if a noticeable reduction in ﬂow rate occurs. 1

Heavy

Sediment

Cyst

Reduction

Turbidity

Reduction

Capacity

Gals.

(Liters)

(7,570)

(9,464)

(9,085)

Flow Rate

gpm (lpm)

1.0

(3.78)

1.0

(3.78)

1.0

(3.78)

Carton

Dimensions

cu. ft. (cu. m.)

(11.8)

Carton

Qty

1.8

(0.05)

1.53

(0.04)

1.8

(0.05)

WARNING: To reduce the risk associated with the ingestion of contaminants: Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system. Systems certiﬁed for

cyst reduction may be used on disinfected water that may contain ﬁltratable cysts. EPA Establishment #070595-CT-001

3M™ Water Filtration Products contain one or more of the following NSF listed head/cartridge combinations:

CS-24/CS-24 CS-14/CS-14 CS-64/CS-64

Refer to the PDS sheet for the certified claims.

Case

Limited Warranty

CUNO Incorporated warrants this Product to be free from defects in material and workmanship for 5 years from the date of purchase. This warranty does not cover failures resulting from abuse, misuse, alteration or damage not caused by CUNO or failure to follow installation and use instructions. If the Product is defective CUNO will replace the Product or refund your Product purchase price. CUNO will not be liable for any indirect, special, incidental, or consequential damages arising from the use of this Product. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation may not apply to you. To obtain warranty service, mail your request to Warranty Claims, CUNO Incorporated, 400 Research Parkway, Meriden, CT 06450. Proof of purchase (original sales receipt) must accompany the warranty claim, along with a complete description of the Product, model number and alleged defect. This warranty gives you speciﬁc legal rights and

you may have other rights which vary from state to state, or country to country.

Distributed By:

Meriden, CT 06450, USA

Toll Free: 1.888.218.CUNO

Worldwide: 203.237.5541

www.cunofoodser vice.com

CUNO Incorporated

400 Research Parkway

Fax: 203.238.8701