Page 1
3M™ Pleated Foil Shielded Cable
.025″ 30 AWG Solid, TPE Primary, PVC Jacket 90101 Series
• Compatible with IDC mass termination
connectors
• Functions with applications requiring standard
impedance of 100 Ω balanced (differential)
• Extremely low crosstalk, used in the all-signal
mode to quadruple signal density as compared to
standard .050 inch flat ribbon cable
• Solid pleated copper foil provides flexibility and
35 db average shielding effectiveness
• CL2 rated, rugged design and high reliability
for peripheral applications
• RoHS* Compliant
Date Modified: January 19, 2005
TS-0285-19
Sheet 1 of 2
Physical
Jacket
Material:
Color:
Primary Material:
Marking:
Standard::
Conductors:
Shielding:
Polyvinyl Chloride (PVC)
Gray
Thermoplastic Elastomer (TPE)
(UL) CL2 75C 30 AWG 3M NU
C AWM II A/B 80C 150V FT1 EU <50V
30 AWG [ 0.254 ] Tinned Stranded Copper
Solid, Pleated, Copper Foil
Electrical
Voltage Rating:
Insulation Resistance:
Characteristic Impedance:
Capacitance:
Inductance:
Propagation Delay:
Velocity of Propagation:
Note:Unbalanced is measured between ground-signal-ground conductors, with shield grounded. Balanced is measured between signal conductors within a pair, with
the shield floating.
USA: N.E.C. 725, CL2 Canada: 150V EU: <50V
(Primary Cable)> 1 × 10
Unbalanced Balanced
53 Ω 104 Ω
28.4 pF/ft (93.2 pF/m) 14.5 pF/ft (47.6 pF/m)
.08 µH/ft (0.26 µH/m) .16 µΗ/ft (0.52µΗ/m)
1.52 ns/ft (4.99 ns/m) 1.51 ns/ft (4.95 ns/m)
67% 67%
10
Ω/10 ft. [ 3m ]
Environmental
Temperature Rating:
Flammability Rating:
RoHS = Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment
UL File No.: E118773, Power Limited Circuit Cable: CL2
3M
Interconnect Solutions
http://www.3M.com/interconnects/
CL2: 75°C Canada: 80°C
USA: N.E.C. 725, CL2 Canada: FT1
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
Page 2
3M™ Pleated Foil Shielded Cable
.025″ 30 AWG Solid, TPE Primary, PVC Jacket 90101 Series
Number of
Conductors
3M Part
Number
Dimension A ± .030 Dimension B
20 90101/20 .60 [ 15.2 ] 0.475 ± .006 [ 12.07 ]
26 90101/26 .75 [ 19.1 ] 0.625 ± .006 [ 15.88 ]
36 90101/36 1.00 [ 25.4 ] 0.875 ± .009 [ 22.23 ]
40 90101/40 1.10 [ 27.9 ] 0.975 ± .009 [ 24.77 ]
50 90101/50 1.35 [ 34.3 ] 1.225 ± .009 [ 31.12 ]
68 90101/68 1.80 [ 45.7 ] 1.675 ± .012 [ 42.55 ]
80 90101/80 2.10 [ 53.3 ] 1.975 ± .015 [ 50.17 ]
100 90101/100 2.60 [ 66.0 ] 2.475 ± .017 [ 62.87 ]
Inch
[mm]
Tolerance Unless Noted
.0
Inch
A
B
.00 .000
±.05
±.1
[ ] Dimensions for
Reference only
±.010
.025 ± .002 Typ
[ 0.64 ]
.10 ± .03
[ 2.5 ]
30 AWG [ 0.254 ]
Tinned Solid Copper
Conductors
Paper
(Mfgr. Option)
Note: Blue marking on edge of primary cable designates wire #1.
Ordering Information
TPE Primary
Insulation
.005 [ 0.13 ] Pleated Foil Shield
with Adhesive Backing using Solid
Copper Foil .001 [ 0.03 ] Thick
90101/XX
.026 (0.66) Min
PVC Jacket
Note: Standard lengths are 100 ft., 150 ft. and 300 ft. rolls. Please specify when ordering,.
3M
Interconnect Solutions
http://www.3M.com/interconnects/
Number of Conductors
(See Table)
For technical, sales or ordering information call
TS-0285-19
Sheet 2 of 2
3M is a trademark of 3M Company.
800-225-5373
Page 3
Important Notice
All statements, technical information, and recommendations related
to 3M’s products are based on information believed to be reliable,
but the accuracy or completeness is not guaranteed. Before using
this product, you must evaluate it and determine if it is suitable
for your intended application. You assume all risks and liability
associated with such use. Any statements related to the product
which are not contained in 3M’s current publications, or any
contrary statements contained on your purchase order shall have
no force or effect unless expressly agreed upon, in writing, by an
authorized officer of 3M.
3
Electronic Solutions Division
6801 River Place Blvd.
Austin, TX 78726-9000
www.3M.com/esd
Warranty; Limited Remedy; Limited Liability.
This product will be free from defects in material and manufacture
for a period of 1 year from the time of purchase. 3M MAKES NO
OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY
IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS
FOR A PARTICULAR PURPOSE. If this product is defective within
the warranty period stated above, your exclusive remedy shall be,
at 3M’s option, to replace or repair the 3M product or refund the
purchase price of the 3M product. Except where prohibited by
law, 3M will not be liable for any indirect, special, incidental or
consequential loss or damage arising from this 3M product,
regardless of the legal theory asserted.
Minimum 10%
Post-consumer Fiber
Printed in USA.
© 3M 2005
Loading...