Filament tape 8954 is a general purpose tape reinforced with two-
good adhesion to fibreboard surfaces
An extensive line of application equipment including hand held
Synthetic rubber resin (solvent free)
Total Thickness
Core size (ID)
Performance Characteristics
Adhesion to Stainless Steel
Filament Tape 8954
directional (cross weave) glass filaments The ScotchPro™
polypropylene backing provides excellent abrasion, moisture and
scuff resistance. The adhesive is specially formulated to provide
manual dispensers and semi-automatic L-Clip applicator Once
applied, the tape performs well throughout the normal temperature
ranges typically encountered by packaged products in shipping and
AFERA 4006
125 microns (0.125mm)
AFERA 4001
AFERA 4004
AFERA 4005
Tartan 8954
3M (East) AG Representation
Store in clean dry place. Temperature of 21 °C and 50 percent
relative humidity are recommended.
Scotch 8954 has a shelf life of 12 months from date of dispatch by
For Additional Information
To request additional product information see address below
All statements, technical information and recommendations
3M believes are reliable. However, many factors beyond 3M’s
particular application, including the conditions under which the
terms of the sale subject, where applicable, to the prevailing law
Values presented have been determined by standard test methods and are average values not to be used for
result of our recommendations
May 2009
3M when stored in the original carton at 21°C (70°F) & 50 %
contained in this document are based upon tests or experience that
control can affect the use and performance of a 3M product in a
product is used and the time and environmental conditions in which
the product is expected to perform. Since these factors are uniquely
within the user’s knowledge and control, it is essential that the user
evaluate the 3M product to determine whether it is fit for a particular
purpose and suitable for the user’s method or application.
All questions of liability relating to this product are governed by the
specification purposes. Our recommendations on the use of our products are based on tests believed to be reliable but
we would ask that you conduct your own tests to determine their suitability for your applications.
This is because 3M cannot accept any responsibility or liability direct or consequential for loss or damage caused as a
3M is a trademark of the 3M Company.
Business Park, bl.4, 2nd floor
Sofia 1766
Bulgaria
3M Česko, spol. s r. o.
V Parku 2343/24
148 00 - Praha 4
Czech Republic
3M East AG
Representation Office Serbia
Airport City
Omladinskih brigada 90B
11070 Belgrade
Serbia
3M (East) AG
Mladost 4
Branch Office Croatia
Avenija Većeslava Holjevca 40
10010 Zagreb
Croatia
3M (East) AG
Branch Office Slovenia
Cesta v Gorice 8
1000 Ljubljana
Office Tirane
Rruga Sami Frasheri
Pallati i Ri Perxhola Kati 2 Ap2
1000 Albania
3M Hellas MEPE
20 Kifissias Ave.
151 25 Maroussi
Athens
Greece
3M Hungária Kft
Neumann János u. 1/E.
1117 Budapest
Hungary
3M Israel
91 Medinat Hayehudim St.
Herzliya
Israel
3M Poland Sp. z o.o.
Aleja Katowicka 117 Kajetany
05-830 Nadarzyn
Poland
Bucharest Business Park
12 Menuetului St.
Building D, District 1
013713 Bucharest
Romania
3M Sanayi ve Ticaret A.Ş.
Barbaros Mah., Mor Sümbül
Sok.
No:7/3F, 27-51, Nidakule
Ataşehir Güney
34746 Atasehir, Istanbul
Turkey
3M Slovensko s.r.o.
Polus Tower 2
Vajnorská 142
Bratislava 83104
Slovakia