3M 8953 Data Sheet
Tartan
TM
Filament Tape 8953
Product Data Sheet
May 2009
Supersedes: New
Product Description
A utility packaging tape reinforced with continuous glass filaments
fibreboard surfaces
Key Features
An extensive line of application equipment is available, including
environments.
Construction
Adhesive Type
Synthetic rubber resin (solvent
Backing
ScotchPro™ polypropylene
Reinforcement
Glass filament
Total Thickness
Core size (ID)
76 mm (3”)
Colour
Transparent
Performance Characteristics
Adhesion to Stainless Steel
AFERA 4001
5.5 N/cm
AFERA 4004
250 N/cm
AFERA 4005
10 %
which give tensile strength to the tape. The ScotchPro™
polypropylene backing provides abrasion, moisture and scuff
resistance. The adhesive is formulated to adhere adequately to
automatic sealing equipment, hand held manual dispensers and
semi-automatic L-Clip applicator. Application of 8953 is most easily
accomplished at room temperature. Once applied, 8953 performs
well throughout the normal temperature ranges typically
encountered by packaged products in shipping and storage
AFERA 4006
free)
100 microns (0.100 mm)
Tensile Strength
Elongation at Break
Tartan 8953
Storage
Store in clean dry place. Temperature of 21 °C and 50 percent
relative humidity are recommended.
Shelf Life
Scotch 8953 has a shelf life of 12 months from date of dispatch by
Relative Humidity.
For Additional Information
To request additional product information see address below
Important Notice
All statements, technical information and recommendations
reliable. However, many factors beyond 3M’s
particular application, including the conditions under which the
terms of the sale subject, where applicable, to the prevailing law
Values presented have been determined by standard test methods and are average values not to be used for
result of our recommendations
3M is a trademark of the 3M Company.
3M United Kingdom PLC
United Kingdom
3M Svenska AB
Sweden
3M Eesti OÜ
Estonia
3M Ireland Ltd
3M a/s
3M Latvia SIA
3M Belgium bvba/sprl
Belgium
3M Norge AS
Norway
3M Lietuva UAB
Lithuania
3M Nederland B.V.
The Netherlands
Suomen 3M Oy
Finland
May 2009
3M when stored in the original carton at 21°C (70°F) & 50 %
contained in this document are based upon tests or experience that
3M believes are
control can affect the use and performance of a 3M product in a
product is used and the time and environmental conditions in which
the product is expected to perform. Since these factors are uniquely
within the user’s knowledge and control, it is essential that the user
evaluate the 3M product to determine whether it is fit for a particular
purpose and suitable for the user’s method or application.
All questions of liability relating to this product are governed by the
specification purposes. Our recommendations on the use of our products are based on tests believed to be reliable but
we would ask that you conduct your own tests to determine their suitability for your applications.
This is because 3M cannot accept any responsibility or liability direct or consequential for loss or damage caused as a
2M Centre, Cain Road, Bracknell
RG12 8HT
The Iveagh Building, 3rd Floor
The Park, Carrickmines 18
Ireland
Herrjärva torg 4
170 6 7 Solna
Hannemanns Allé 53
DK-2300 Copenhagen S.
Denmark
Pärnu mnt. 158
113 17 T a l l i n n
K.Ulmaņa gatve 5
Rīga, LV-10 0 4
Latvia
Hermeslaan 7
18 3 1 D i e g e m
Molengraaffsingel 29
2629 JD Delft
Tærudgata 16
2004 Lillestrøm
Keilaranta 6
02150 Espoo
A.Goštauto g. 40
Vilnius LT- 0 3 16 3
Loading...