Page 1
THE LATEST
ADVANCES IN
ALUMINUM
SOLUTIONS
Page 2
COMPLETE
ALUMINUM SOLUTIONS
Scotch-Brite sets the standard for non-woven industrial abrasives. It’s the
original–invented by 3M and proudly made in the USA. The performance of
Scotch-Brite innovations is reected in the aluminum nishes of countless
craftsmen and metal professionals across the globe. As 3M continues to
innovate, you’ll always have the most advanced abrasive technologies right
in your hands.
Introducing the latest aluminum solutions from 3M. With a complete selection
of abrasive products and tools, you’ll have the most advanced equipment to
make a professional nish on aluminum and other soft metals each and every
time.
New Scotch-Brite™ AL Surface Conditioning Discs
New Scotch-Brite™ Deburr and Finish PRO Unitized
Wheels
™
New 3M
The latest 3M™ Disc Sanders and Die Grinders
Cubitron™ II Roloc™ Durable Edge Disc 947A
Page 3
Combining the most advanced blending and nishing capabilities, these non-woven surface conditioning discs
NEW SCOTCH-BRITE
™
AL SURFACE
CONDITIONING DISCS
give you a nish that can meet the highest standards of quality control. The unique, open web construction resists
loading, providing up to twice the service life giving an easy-to-handle blend on aluminum, oily carbon and other
soft metal surfaces.
Features
Scotch-Brite™ non-woven construction
Benets
• Same great performance you know and trust
• Loading resistant
• Longer life
• Faster blending and nishing
• Better edge retention
Performance Graphs
Finishing Rate on Aluminum
40
35
30
25
20
15
Blending Speed (grams)
10
5
0
1 2 3 4 5 6 7 8
Time (minutes)
Scotch-Brite™ discs outperform the competition in both
the rate of blend and consistency of nish. The graph
above shows how they blend material faster to increase
productivity. The graph at right shows how they maintain
a consistent nish while achieving this higher blend
rate. Overall, this means Scotch-Brite discs can reduce
your nishing time without sacricing your nish quality.
So when you factor in their longer life, you’ve got every-
thing needed to lower nishing costs.
AL
SC
Competitor #2
Competitor #1
Applications
Aluminum and other soft
metal nishing
Grade*
• Very Fine
• Medium
• Coarse
*Roloc™ and Hook-and-Loop
Total Finishing Rate (of all grades)
Very Fine
45
40
35
30
25
20
15
Blending Speed (grams)
10
5
0
0 20 40 60 80 100
AL= New Scotch-Brite™ AL Surface Conditioning Disc
SC=Scotch-Brite
Medium
Finish (Ra uinch)
Competitor #2SCAL Competitor #1
™
SC Surface Conditioning Disc
Coarse
Page 4
Built for productivity, no other non-woven unitized wheels
NEW SCOTCH-BRITE
™
DEBURR AND FINISH
PRO UNITIZED WHEELS
are as eective for deburring and nishing. They let you blast
through aluminum imperfections with less loading—so you’ll
get a smooth nish over and over again.
Features
• Scotch-Brite™ non-woven construction
• 3M Precision-Shaped Ceramic
Grain Technology
Benets
• Loading resistant
• Up to 3X longer life (see graph left)
• 30-50% faster burr removal (see graph right)
• Consistent nishes
• Smooth running feel
Performance Graphs
Wheel Wear
3.5
3
2.5
2
1.5
Wheel Diameter (inches)
1
Start 5 10 15 20 25 30 35 40 45 50
Deburr Cycles
Deburr & Finish Pro Competitor
LASTS LONGER
Applications
• Deburring
• Finishing
• Blending
Cumulative Time to Deburr
39 Total Cycles
1400
1200
1000
Time (Seconds)
800
600
400
200
0
TIME
SAVED*
DEBURRS
FASTER
Deburr &
Finish Pro
*Time saved=300 seconds (5 minutes)
Competitor
Page 5
Designed for speed and durability, these quick-change discs come
NEW 3M
™
CUBITRON
™
II
ROLOC
™
DURABLE EDGE
DISC 947A
in a range of sizes and grades to give you a faster, more consistent
cut each and every time.
Both the Scotch-Brite™ Deburr and Finish PRO
Unitized Wheels and the 3M
Durable Edge Disc 947A feature 3M Precision-
Shaped Ceramic Grain. This revolutionary technology features triangular shaped ceramic minerals.
As those minerals wear during use, they fracture
at angles that continually form sharp points. This
allows the minerals to keep slicing through the
substrate with ease, while helping the grain wear
more evenly. No other industrial abrasive delivers
the same kind of performance, feel or nish.
Conventional Grain
Precision-Shaped Grain
3M Precision-Shaped Ceramic Grain cuts faster, lasts
longer, and produces a more consistent nish.
In comparison to conventional grain
†
™
Cubitron™ II Roloc™
Features
• 3M Precision-Shaped Ceramic
Grain Technology
Benets
†
• Loading resistant
• Longer lasting
• Faster cutting
• Quick-change capability
Performance Graphs
60+ on Aluminum
7
6
5
4
3
Cut (grams)
2
1
0
1 2 3 4 5
947A, high pressure
947A, low pressure
Minutes
Applications
• Deburring
• Blending
• Cleaning
• Finishing
Grit
• 40+
• 60+
• 80+
• 120+
3M™ Cubitron™ II
Roloc
Disc 947A
delivers consistency
with either high or
low pressure, while
maintaining a high
cut rate.
984F, high pressure
984F, low pressure
™
Durable Edge
Page 6
The latest pneumatic 3M Disc Sanders and Die Grinders have been completely
3M™
DISC SANDERS
AND DIE GRINDERS
re-engineered to work even better with Scotch-Brite and Cubitron II abrasives.
On the outside, a stronger, all-steel head gives you more control during use. On
the inside, larger gear sets, spindle bearings and seals greatly extend durability.
Simply put, these are the most advanced pneumatic tools for extending the life
of abrasives and achieving a professional nish on every job.
Features
• Heavy-duty head design
• Larger gear sets, spindle bearings and seals
• Ergonomic safety lever and jacket
• Kevlar reinforced vanes
• CE Certied
Benets
• Intuitive grip
• Greater wrist comfort
• Increased durability
• Minimal vibration
• Quieter operation
Power
• 0.3 hp
Applications
• Adhesive removal
• Coating removal
• Contour nishing
• Deburring edges
• Defect repair/leveling
• Edge beveling/chamfering
• Paint stripping
• Prepping metal prior to paint
• Radiusing
• Right angle
• Sealant removal
• 0.5 hp
Page 7
SCOTCH-BRITE™ AL SURFACE CONDITIONING DISCS
Scotch-Brite
™
AL Surface Conditioning Discs
Scotch-Brite™ Roloc™ AL Surface Conditioning Discs TR
UPC SIZE GRADE DISCS MAX RPM
051141-54197-6 1-1/2"xNH A CRS 200/cs 25000
051141-54198-3 2"xNH A CRS 50/200 23000
051141-54199-0 3"xNH A CRS 25/100 18000
051141-54209-6 4"xNH A CRS 100/cs 10000*
051141-54219-5 4-1/2"xNH A CRS 50/cs 9600*
051141-54224-9 4-1/2"x7/8" A CRS 50/cs 9600*
051141-54212-6 5"xNH A CRS 50/cs 8500*
051141-54210-2 5"x7/8" A CRS 50/cs 8500*
051141-54204-1 7"xNH A CRS 25/cs 6000
051141-54222-5 7"x7/8" A CRS 25/cs 6000
051141-54200-3 1-1/2"xNH A MED 200/cs 25000
051141-54201-0 2"xNH A MED 200/cs 23000
051141-54202-7 3"xNH A MED 100/cs 18000
051141-54203-4 4"xNH A MED 25/100 10000
051141-54218-8 4-1/2"xNH A MED 50/cs 9600
051141-54223-2 4-1/2"x7/8" A MED 50/cs 9600
051141-54215-7 5"xNH A MED 50/cs 8500
051141-54216-4 5"x7/8" A MED 50/cs 8500
051141-54211-9 7"xNH A MED 25/cs 6000
076308-77141-6 7"x7/8" A MED 25/cs 6000
051141-54205-8 1-1/2"xNH A VFN 200/cs 25000
051141-54206-5 2"xNH A VFN 200/cs 23000
051141-54207-2 3"xNH A VFN 100/cs 18000
051141-54208-9 4"xNH A VFN 100/cs 10000
051141-54217-1 4-1/2"xNH A VFN 50/cs 9600
076308-77133-1 4-1/2"x7/8" A VFN 50/cs 9600
051141-54213-3 5"xNH A VFN 50/cs 8500
051141-54220-1 5"x7/8" A VFN 50/cs 8500
051141-54214-0 7"xNH A VFN 25/cs 6000
051141-54221-8 7"x7/8" A VFN 25/cs 6000
UPC SIZE GRADE DISCS MAX RPM
051141-54141-9 3/4"xNH A CRS 200/cs 30000
051141-54125-9 1"xNH A CRS 200/cs 30000
051141-54108-2 1-1/2"xNH A CRS 200/cs 30000
051141-54137-2 2"xNH A CRS 50/200 25000
051141-54140-2 3"xNH A CRS 25/100 18000
051141-54113-6 4"xNH A CRS 25/100 12000
051141-54124-2 1"xNH A MED 200/cs 30000
051141-54109-9 1-1/2"xNH A MED 200/cs 30000
051141-54136-5 2"xNH A MED 50/200 25000
051141-54139-6 3"xNH A MED 25/100 18000
051141-54112-9 4"xNH A MED 25/100 12000
051141-54123-5 1"xNH A VFN 200/cs 30000
051141-54110-5 1-1/2"xNH A VFN 200/cs 30000
051141-54135-8 2"xNH A VFN 50/200 25000
051141-54138-9 3"xNH A VFN 25/100 18000
051141-54111-2 4"xNH A VFN 25/100 12000
Scotch-Brite™ Roloc™ AL Surface Conditioning Discs TS
UPC SIZE GRADE DISCS MAX RPM
051141-54114-3 2"xNH A CRS 50/200 25000
051141-54117-4 3"xNH A CRS 25/100 18000
051141-54120-4 4"xNH A CRS 25/100 12000
051141-54115-0 2"xNH A MED 50/200 25000
051141-54118-1 3"xNH A MED 25/100 18000
051141-54121-1 4"xNH A MED 25/100 12000
051141-54116-7 2"xNH A VFN 50/200 25000
051141-54119-8 3"xNH A VFN 25/100 18000
051141-54122-8 4"xNH A VFN 25/100 12000
Scotch-Brite™ Roloc™ AL Surface Conditioning Discs TSM
UPC SIZE GRADE DISCS MAX RPM
051141-54149-5 1-1/2"xNH A CRS 200/cs 30000
051141-54143-3 2"xNH A CRS 50/200 25000
051141-54145-7 3"xNH A CRS 25/100 18000
051141-54148-8 1-1/2"xNH A MED 200/cs 30000
051141-54142-6 2"xNH A MED 50/200 30000
051141-54144-0 3"xNH A MED 25/100 18000
051141-54147-1 1-1/2"xNH A VFN 200/cs 30000
051141-54146-4 2"xNH A VFN 50/200 25000
051141-54150-1 3"xNH A VFN 25/100 18000
™
3M
DISC SANDERS
Scotch-Brite™ AL Surface Conditioning Discs TN
Quick Change
UPC SIZE GRADE DISCS MAX RPM
076308-64361-4 4-1/2×5/8-11 A CRS 50/cs 12000
076308-64360-7 5×5/8-11 A CRS 50/cs 9500
076308-64362-1 7×5/8-11 A CRS 25/cs 7000
076308-64363-8 4-1/2×5/8-11 A MED 50/cs 12000
076308-64359-1 5×5/8-11 A MED 50/cs 9500
076308-64364-5 7×5/8-11 A MED 25/cs 7000
076308-64365-2 4-1/2x 5/8-11 A VFN 50/cs 12000
076308-64358-4 5×5/8-11 A VFN 50/cs 9500
076308-64366-9 7×5/8-11 A VFN 25/cs 7000
Disc Sanders
MODEL NO. UPC DIAMETER RPM MOTOR CASE QTY
28341* 051141-28341-8 2 in 20,000 .3 HP 1
28328* 051141-28328-9 2 in 12,000 .3 HP 1
20231* 051141-20231-0 2 in 20,000 .5 HP 1
28329* 051141-28329-6 2 in 12,000 .5 HP 1
*available in metric collet
* 4” max RPM 13,000 when using 3M Back Up Pad 924. 4.5” max RPM 12,000 when using 3M Back Up Pad 9145FD1. 5” max RPM 10,000 when using 3M Back Up Pad 915FD1.
1
CPS is Contract Production Services, Inc. Minneapolis, MN 55403 supplied.
Page 8
™
3M
DIE GRINDERS
Die Grinders
MODEL NO. UPC
28627 051141-28627-3 1/4 in 18,000 .3 HP 1 N/A
28628 051141-28628-0 1/4 in 18,000 .3 HP 1 3" EXT
28629 051141-28629-7 1/4 in 25,000 .3 HP 1 N/A
28630 051141-28630-3 1/4 in 25,000 .3 HP 1 3" EXT
28330* 051141-28330-2 1/4 in 18,000 .5 HP 1 N/A
28331* 051141-28331-9 1/4 in 18,000 .5 HP 1 3" EXT
28332* 051141-28332-6 1/4 in 4,000 .5 HP 1 N/A
*available in metric collet
™
3M
CUBITRON™ II ROLOC
Roloc™ Durable Edge Disc TR 947A
UPC SIZE GRADE DISCS MAX RPM
051141-54239-3 1-1/2 in 40+ 50/200 30000
051141-54240-9 2 in 40+ 50/200 25000
051141-54241-6 3 in 40+ 50/200 20000
051141-54242-3 4 in 40+ 25/100 12000
051141-54247-8 1-1/2 in 60+ 50/200 30000
051141-54248-5 2 in 60+ 50/200 25000
051141-54249-2 3 in 60+ 50/200 20000
051141-54250-8 4 in 60+ 25/100 12000
051141-54255-3 1-1/2 in 80+ 50/200 30000
051141-54256-0 2 in 80+ 50/200 25000
051141-54257-7 3 in 80+ 50/200 20000
051141-54258-4 4 in 80+ 25/100 12000
051141-54263-8 1-1/2 in 120+ 50/200 30000
051141-54264-5 2 in 120+ 50/200 25000
051141-54265-2 3 in 120+ 50/200 20000
051141-54266-9 4 in 120+ 25/100 12000
COLLET SIZE
RPM MOTOR CASE QTY EXT
™
DURABLE EDGE DISC 947A
UPC SIZE GRADE DISCS MAX RPM
051141-54243-0 1-1/2 in 40+ 50/200 30000
051141-54244-7 2 in 40+ 50/200 25000
051141-54245-4 3 in 40+ 50/200 20000
051141-54246-1 4 in 40+ 25/100 12000
051141-54251-5 1-1/2 in 60+ 50/200 30000
051141-54252-2 2 in 60+ 50/200 25000
051141-54253-9 3 in 60+ 50/200 20000
051141-54254-6 4 in 60+ 25/100 12000
051141-54259-1 1-1/2 in 80+ 50/200 30000
051141-54260-7 2 in 80+ 50/200 25000
051141-54261-4 3 in 80+ 50/200 20000
051141-54262-1 4 in 80+ 25/100 12000
051141-54267-6 1-1/2 in 120+ 50/200 30000
051141-54268-3 2 in 120+ 50/200 25000
051141-54269-0 3 in 120+ 50/200 20000
051141-54270-6 4 in 120+ 25/100 12000
Roloc™ Durable Edge Disc TSM 947A
™
3M
DEBURR AND FINISH
PRO UNITIZED WHEELS
Deburr and Finish PRO TR Unitized Wheels
UPC SIZE
076308-77115-7 2×1/4xNH 4C MED+ 60/cs 22100
076308-77116-4 3×1/4xNH 4C MED+ 40/cs 15100
048011-65082-1 2×1/4xNH 6C MED+ 60/cs 22100
048011-65083-8 3×1/4xNH 6C MED+ 40/cs 15100
Warranty and Limited Remedy: 3M warrants that each 3M product meets the applicable 3M product specication at the time 3M ships the product.
3M MAKES NO OTHER EXPRESS OR IMPLIED WARRANTIES OR CONDITIONS, INCLUDING ANY IMPLIED WARRANTY OR CONDITION OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If the 3M product does not conform to this warranty, the sole and exclusive
remedy is, at 3M’s option, replacement of the 3M product or refund of the purchase price.
Limitation of Liability: Except where prohibited by law, 3M will not be liable for any loss or damage arising from the 3M product, whether direct,
indirect, special incidental or consequential, regardless of the legal theory asserted.
Abrasive Systems Division
3M Center
Building 223-6S-03
St. Paul, MN 55144-1000
DENSITY/
GRADE
DISCS MAX RPM
3M, Cubitron, Roloc and Scotch-Brite
are trademarks of 3M Company.
Used under license in Canada.
1-866-279-1235
www.3M.com/Abrasives
Please recycle. Printed in U.S.A.
© 3M 2015. All rights reserved.
61-5002-8398-3
Loading...