3M 60440097859, 60440097867, 60440097875, 60440097883 User Manual

3M™ Abrasive Products, 947D Flap Discs 02/25/14

__________________________________________________________________________________________

Page 1 of 10

Safety Data Sheet

Copyright,2014,3M Company.
All rights reserved. Copying and/or downloading of this information for the purpose of properly utilizing 3M products is
allowed provided that: (1) the information is copied in full with no changes unless prior written agreement is obtained from
3M, and (2) neither the copy nor the original is resold or otherwise distributed with the intention of earning a profit thereon.

Document Group:

27-2750-1

Version Number:

1.05

Issue Date:

02/25/14

Supercedes Date:

02/15/13

SECTION 1: Identification

1.1. Product identifier

3M™ Abrasive Products, 947D Flap Discs

1.2. Recommended use and restrictions on use

Recommended use

Abrasive Product

1.3. Supplier’s details
MANUFACTURER:

3M

DIVISION:

Abrasive Systems Division

ADDRESS:

3M Center, St. Paul, MN 55144-1000, USA

Telephone:

1-888-3M HELPS (1-888-364-3577)

1.4. Emergency telephone number

1-800-364-3577 or [phone] (24 hours)

SECTION 2: Hazard identification

2.1. Hazard classification

Not classified as hazardous according to OSHA Hazard Communication Standard, 29 CFR 1910.1200.

2.2. Label elements

Signal word

Not applicable.

Symbols

Not applicable.

Pictograms

Not applicable.

Notes to Physician:

Not applicable

2.3. Hazards not otherwise classified

None.

3M™ Abrasive Products, 947D Flap Discs 02/25/14

__________________________________________________________________________________________

Page 2 of 10

40% of the mixture consists of ingredients of unknown acute oral toxicity.
51% of the mixture consists of ingredients of unknown acute dermal toxicity.

SECTION 3: Composition/information on ingredients

Ingredient C.A.S. No. % by Wt

Ceramic Aluminum Oxide / Aluminum Oxide Mineral
Blend (non-fibrous)

1344-28-1 10 - 35

Inorganic Fluoride 15096-52-3 1 - 10 Trade Secret *
Inorganic Fluoride 14075-53-7 1 - 10 Trade Secret *
Filler 13983-17-0 0 - 10
Filler 1317-65-3 0 - 10
Filler 1332-58-7 0.25 - 2
Filler 7727-43-7 1.5 - 3.5
Titanium Dioxide 13463-67-7 0.05 - 1.5 Trade Secret *
Pigment 1332-37-2 0.05 - 1.5
Cured Resin Mixture 10 - 40
Cloth Backing Mixture 5 - 20
Fiberglass plate Mixture 20 - 25

*The specific chemical identity and/or exact percentage (concentration) of this composition has been withheld as a trade
secret.

SECTION 4: First aid measures

4.1. Description of first aid measures

Inhalation:

Remove person to fresh air. If you feel unwell, get medical attention.

Skin Contact:

Wash with soap and water. If signs/symptoms develop, get medical attention.

Eye Contact:

Flush with large amounts of water. Remove contact lenses if easy to do. Continue rinsing. If signs/symptoms persist, get
medical attention.

If Swallowed:

No need for first aid is anticipated.

4.2. Most important symptoms and effects, both acute and delayed

See Section 11.1. Information on toxicological effects.

4.3. Indication of any immediate medical attention and special treatment required

Not applicable

SECTION 5: Fire-fighting measures

5.1. Suitable extinguishing media

In case of fire: Use a fire fighting agent suitable for ordinary combustible material such as water or foam to extinguish.

5.2. Special hazards arising from the substance or mixture

None inherent in this product.

3M™ Abrasive Products, 947D Flap Discs 02/25/14

__________________________________________________________________________________________

Page 3 of 10

Hazardous Decomposition or By-Products

Substance Condition

Carbon monoxide During Combustion
Carbon dioxide During Combustion

5.3. Special protective actions for fire-fighters

No unusual fire or explosion hazards are anticipated.

SECTION 6: Accidental release measures

6.1. Personal precautions, protective equipment and emergency procedures

Observe precautions from other sections.

6.2. Environmental precautions

Avoid release to the environment.

6.3. Methods and material for containment and cleaning up

Not applicable.

SECTION 7: Handling and storage

7.1. Precautions for safe handling

For industrial or professional use only. Avoid breathing of dust created by sanding, grinding or machining. Damaged
product can break apart during use and cause serious injury to face or eyes. Check product for damage such as cracks or nicks
prior to use. Replace if damaged. Always wear eye and face protection when working at sanding or grinding operations or
when near such operations. Avoid release to the environment. Combustible dust may form by action of this product on
another material (substrate). Dust generated from the substrate during use of this product may be explosive if in sufficient
concentration with an ignition source. Dust deposits should not be allowed to accumulate on surfaces because of the potential
for secondary explosions.

7.2. Conditions for safe storage including any incompatibilities

No special storage requirements.

SECTION 8: Exposure controls/personal protection

8.1. Control parameters

Occupational exposure limits

Ingredient C.A.S. No. Agency Limit type Additional Comments

Filler 1317-65-3 US Dept of

Labor - OSHA

TWA(as total dust):15
mg/m3;TWA(respirable
fraction):5 mg/m3

Filler 1332-58-7 Amer Conf of

Gov. Indust.
Hyg.

TWA(respirable fraction):2
mg/m3

KAOLIN, TOTAL DUST 1332-58-7 US Dept of

Labor - OSHA

TWA(as total dust):15
mg/m3;TWA(respirable
fraction):5 mg/m3

Aluminum, insoluble compounds 1344-28-1 Amer Conf of

Gov. Indust.
Hyg.

TWA(respirable fraction):1
mg/m3

Ceramic Aluminum Oxide / 1344-28-1 Chemical TWA:1 fiber/cc