Page 1
3M Round, Jacketed, Flat Cable
.050″ 28 AWG Stranded, Mass-Term, PVC/PVC 3759 Series
S Round construction permits easier routing
S 28 AWG wire on .050 inch centers permits
mass termination to broad line of IDC
connectors
S Continuous split/bond repeat allows for mass
termination on 2.4 inch centers (approximate)
S Meets external wiring requirements of
National Electrical Code, Article 725 (CL2)
S Primary cable is zippable for branching or
discrete terminations.
S UL listed for USA and Canadian markets
S *RoHS compliant
TS-0070-20
Date Modified: May 24, 2004
Sheet 1 of 2
Physical
Jacket
Material: Polyvinyl Chloride (PVC)
Color: Black
Primary Material: PVC
Color: Gray
Marking
Standard:
Conductors: 28 AWG 7 × 36 [ 7 × 0.127 ] Tinned Stranded Copper
Inner Wrap: Polyester Film
(UL) CL2 75C 28 AWG OR AWM 20267 3M NU
EU <50V
C
AWM IIA/B 80C 300V FT1
Electrical
Voltage Rating: USA: N.E.C. 725, CL2 or AWM; 300V Canada: 300V EU: <50V
10
Insulation Resistance: (Primary Cable) > 1 × 10
Unbalanced Balanced
Characteristic Impedance: 90 Ω 133 Ω
Capacitance: 16.7 pF/ft (54.8 pF/m) 11.9 pF/ft (39.0 pF/m)
Inductance: 14 µH/ft (0.46 µH/m) .21 µΗ/ft (0.69 µΗ/m)
Propagation Delay: 1.50 ns/ft (4.92 ns/m) 1.58 ns/ft (5.18 ns/m)
Velocity of Propagation: 68% 64%
Note: Unbalanced is measured between ground-signal-ground conductors. Balanced is measured between conductors within a pair.
Ω/10 ft. [ 3m ]
Environmental
Temperature Rating: USA: CL2; 75°CorAWM; --20°Cto+80°C Canada: 80°C
Flammability Rating: USA: N.E.C. 725, CL2 Canada: FT1
Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment
UL File No.: E118773, Power Limited Circuit Cable: CL2 (orAWM Style 20267)
3
Interconnect Solutions
http://www.3M.com/interconnects/
For technical, sales or ordering information call
data_pp (For Web PDF Output)
3M is a trademark of 3M Company.
*RoHS = Directive 2002/95/EC,
800-225-5373
Page 2
3M Round, Jacketed, Flat Cable
.050″ 28 AWG Stranded, Mass-Term, PVC/PVC 3759 Series
Number of
Conductors
3M Part
Number
Dimension A ± .03
Dimension B
(See Note 2)
09 3759/09 0.26 [ 6.6 ] 0.40 [ 10.2 ]
10 3759/10 0.26 [ 6.6 ] 0.45 [ 11.4 ]
14 3759/14 0.27 [ 6.9 ] 0.65 [ 16.5 ]
15 3759/15 0.27 [ 6.9 ] 0.70 [ 17.8 ]
16 3759/16 0.27 [ 6.9 ] 0.75 [ 19.1 ]
20 3759/20 0.30 [ 7.6 ] 0.95 [ 24.1 ]
24 3759/24 0.33 [ 8.4 ] 1.15 [ 29.2 ]
25 3759/25 0.33 [ 8.4 ] 1.20 [ 30.5 ]
26 3759/26 0.33 [ 8.4 ] 1.25 [ 31.8 ]
30 3759/30 0.37 [ 9.4 ] 1.45 [ 36.8 ]
34 3759/34 0.37 [ 9.4 ] 1.65 [ 41.9 ]
36 3759/36 0.39 [ 9.9 ] 1.75 [ 44.5 ]
37 3759/37 0.39 [ 9.9 ] 1.80 [ 45.7 ]
40 3759/40 0.39 [ 9.9 ] 1.95 [ 49.5 ]
50 3759/50 0.44 [ 11.2] 2.45[ 62.2 ]
60 3759/60 0.47 [ 11.9] 2.95[ 74.9 ]
64 3759/64 0.50 [ 12.7 ] 3.15[ 80.0 ]
2.4 Ref
[61]
R
Split
Bonded
1.0 Ref.
[25]
A B
Paper
[ Mfgr. Option ]
.026 Min (0.66)
PVC Jacket
28 AWG 7 X 36 [ 7 X 0.127 ]
Tinned Stranded Copper Conductors
Notes:
1. Red marking on one edge of primary cable designates wire #1.
2. Dimension B pertains to bonded area only.
Ordering Information
3759/XX
Note: Available in standard length of 100 or 300 ft/roll, please specify when ordering.
Polyester Film
Number of Conductors
(See Table)
PVC Primary Insulation
Tolerance Unless Noted
Inch
.050 Typ
[1.27]
Inch
[mm]
.0 .00 .000
[ ] Dimensions for
Reference only
TS-0070-20
Sheet 2 of 2
±.010±.1 ±.05
3
Interconnect Solutions
http://www.3M.com/interconnects/
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
data_pp (For Web PDF Output)
Page 3
© 3M 2004
3
Electronic Solutions Division
6801 River Place Blvd.
Austin, TX 78726-9000
www.3M.com/esd
Important Notice
All statements, technical information, and recommendations related
to 3M’s products are based on information believed to be reliable,
but the accuracy or completeness is not guaranteed. Before using
this product, you must evaluate it and determine if it is suitable for
your intended application. You assume all risks and liability
associated with such use. Any statements related to the product
which are not contained in 3M’s current publications, or any
contrary statements contained on your purchase order shall have
no force or effect unless expressly agreed upon, in writing, by an
authorized officer of 3M.
Warranty; Limited Remedy; Limited Liability.
This product will be free from defects in material and manufacture
for a period of 1 year from the date of purchase. 3M MAKES NO
OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY
IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR
A PARTICULAR PURPOSE. If this product is defective within the
warranty period stated above, your exclusive remedy shall be, at
3M’s option, to replace or repair the 3M product or refund the
purchase price of the 3M product. Except where prohibited by
law, 3M will not be liable for any loss or damage arising from
this 3M product, whether direct, indirect, special, incidental or
consequential regardless of the legal theory asserted.
Loading...