3M Mini-Clamp Plug
2 mm IDC, Wiremount 371 Series
S Provides even quality
S Reduces maintenance work by providing
higher connection reliability
S Reduces waste
S Operation by general tool “pliers” reduces
tooling cost
S Design offers multiple gauges and wire size
diameter
S Latch enables rugged field termination
S RoHS* compliant
TS-2092-02
Date Modified: April 14, 2004
Sheet 1 of 2
Physical
Flammability: UL 94V-0
Underplating: 100 µ″ (2.54 µm) Nickel
Wiping Area: 8 µ″ (0.2 µm) minimum Gold with lubricant
Wire Accommodation: Annealed Copper, high-strength Copper, or Copper Alloy. Bare, tinned, or
Wire Insulation: Flexible vinyl, semi-rigid vinyl, x-linked polyethylene, or ETFE (see table 1)
Electrical
Current Rating: 3.0 Amps
Voltage Rating: 32 Volts
Insulation Resistance: >1x10
Withstanding Voltage: 1000 V rms at sea level
Environmental
Temperature Rating: -- 2 0 °Cto85°C
Insulation
Material: Nylon body, Polylcarbonate cover
Color: Black body, cover—white & color (see table 1)
Conta ct
Material: Copper Alloy
Plating:
IDC: Nickel
tin overcoated, 20~26 AWG [0.14~0.5] stranded
6
Ω at 600V dc
UL File No.: E68080
3
Interconnect Solutions
http://www.3M.com/interconnects/
Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment
For technical, sales or ordering information call
data_pp (For Web PDF Output)
Scotchlok is a trademark of 3M Company.
3M is a trademark of 3M Company.
*RoHS=Directive 2002/95/EC,
800-225-5373
3M Mini-Clamp Plug
2 mm IDC, Wiremount 371 Series
# Positions Dim A
3 12.9 [.51]
4 14.9 [.59]
15.6
[.61]
5.9
[.23]
Before
Termination
7.7
[.30]
Dim
A
After
Termination
5.9
[.23]
Table 1
W ire Insu lation
OD
Part #
1.6 ~ 2.0
[.063~.079]
1.2 ~ 1.6
[.047~.063]
1.0 ~ 1.2
[.039~.047]
0.8 ~ 1.0
[.031~.039]
2206 2165 2124
20-22 AWG
Cover Color Gray Blue Green
Part #
3163 3122 3101
24-26 AWG
Co ver C olor Orange Yellow Red
mm
[inc h ]
T o le ra n c e U n le s s
Noted
.0 .0 0
m m ±.1 ±.10
[ ] D im e n s io n s fo r
Reference O nly
Ordering Information
Note: Terminate using common pliers or 3Mt Scotchlokt E-9BM or E-9E crimping tools.
371XX-XXXX-000 FL
Positions
03 or 04
3
Interconnect Solutions
http://www.3M.com/interconnects/
data_pp (For Web PDF Output)
Wire AWG & OD:
2XXX = 20-22 AWG
3XXX = 24-26 AWG
Wire OD -- see Table 1
TS-2092-02
Sheet 2 of 2
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
© 3M 2004
3
Electronic Solutions Division
6801 River Place Blvd.
Austin, TX 78726-9000
www.3M.com/esd
Important Notice
All statements, technical information, and recommendations related
to 3M’s products are based on information believed to be reliable,
but the accuracy or completeness is not guaranteed. Before using
this product, you must evaluate it and determine if it is suitable for
your intended application. You assume all risks and liability
associated with such use. Any statements related to the product
which are not contained in 3M’s current publications, or any
contrary statements contained on your purchase order shall have
no force or effect unless expressly agreed upon, in writing, by an
authorized officer of 3M.
Warranty; Limited Remedy; Limited Liability.
This product will be free from defects in material and manufacture
for a period of 1 year from the date of purchase. 3M MAKES NO
OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY
IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR
A PARTICULAR PURPOSE. If this product is defective within the
warranty period stated above, your exclusive remedy shall be, at
3M’s option, to replace or repair the 3M product or refund the
purchase price of the 3M product. Except where prohibited by
law, 3M will not be liable for any loss or damage arising from
this 3M product, whether direct, indirect, special, incidental or
consequential regardless of the legal theory asserted.
Loading...