3M 30 User Manual
Operation Guide 3M-30
PG 1
The 3M-30 programmable communicating
thermostat operates via a high-quality, easyto-use touch screen. To program or adjust
your 3M-30, simply touch your nger rmly to
the screen. The screen will automatically light
up and you will hear a “beep.” The screen will
respond differently to different types of touches,
so you may want to experiment by touching it
different ways, nger, ngernail, etc. Do not use
a sharp or metallic device; it will scratch the
screen.
Statement of use: 100% Compatible with all popular
residential HVAC systems; 24VAC single, two stage
conventional heating systems (gas/oil/electric), heat pumps,
single stage or with auxilliary heat (electric or fossil),
zoned forced air and zoned hot water (2 or 3 wire), millivolt
systems (with 24VAC adapter), one or two stage cooling,
and hybrid systems.
1005-002-001
HVAC
selections
switches
Save
Energy
button
Power Grid
status
indicator
Reset
button
top cover
bottom
cover
RADIO
1
LINK
TA RGET TEMP
Wire
terminals
MENU
button
PROG
button
Mode
switch
Fan
switch
DAY
A
U
F
COOL
Touch screen
TO
P
M
ENGLISH
PG 2
Control Screens
Before you operate the 3M-30 please get familiar with these basic control screens. All the 3M-30
functions are accessed through these screens. HOME, MENU, PROGRAM and MANUAL . The
3M-30 touch screen technology allows you to select (by touching) an item and change it using the +/arrows or the time arrows.
HOME Screen
The HOME screen is displayed when the
unit is operating. Touching the HOME icon
on the screen will always return you to
this screen.
To set a Mode:
Set the mode switch on the side to the
desired mode COOL or HEAT.
MODE -
FAN
HEAT-OFF-COOL
Time of day
PM
TARGET TEMP
Target
Temperature
Current Room
Temperature
DAY
Day
Lock indicator
HEAT
Thermostat
Mode
MENU Screen The MENU screen is the gateway to many functions or settings of the
S
T
3M-30. It is displayed when you press the MENU button. [See page 9 for details]
o
et
Set Time
Touch this area to set
the time of day.
Left arrow goes back,
right arrow goes forward.
Filter Timer
Differential set
for 2nd Stage
set
C -oF
Touch this to set
temperature display.
PM
FILTER
SWING
DIFF
Chirp set
Touch this to turn the
audible chirp on or off.
F
C
emperature Swing set
Set Day
Touch this area to set
the day of the week
Calibration control
Use this to calibrate your
LCD display match to
another thermometer.
CALIBRATE
HVAC SETUP
Touch this to configure the
3M30 to work with your
HVAC system.
HVAC
SETUP
HOME
Touch to
return to
Touch for 5 sec
to lock or unlock.
HOME screen.
Lock Program
PG 3
PROGRAM Screen The PROGRAM screen sets the 3M-30 control for your
home HVAC system. It is displayed when you press the PROG button. [See page 7 for details]
PG 4
Set Time Slot
Touch this area to set the
Time Slot you want to program.
Set Program Time
Touch this area to set the
time of day you want each
time period to start.
Left arrow goes back,
right arrow goes forward.
[Touch and hold for fast set]
Copy
Touch this area to copy
current day’s program
to the next day.
Set Program Day
Touch this area to set the day of the
week you want to program TargetTemps for.
AM
PROGRAM
COPY
DAY
Return HOME
When programming is complete
touch this to run your program and
return to the HOME screen.
MORN
F
HEAT
Temp Up / Temp Down
Touch these to raise
and lower each Target Temp.
[Touch and hold for fast set]
MANUAL Screen The Manual Screen control screen is where you can make
temporary changes to your 3M-30’s operation. Touch the main temperature display to use this
screen.
[See page 12 for details]
Manual Override indicator
Shows TEMPORARY when
you have modified the Target.
Target Temperature
F
Temp Up / Temp Down arrows
Touch these to raise and lower
the manual override Target Temp.
TEMPORARY
TEMP
Room Temperature
HOLD
Return HOME
Touch this to invoke a
HOLIDAY
HEAT
HOLIDAY
single program that repeats day
after day until you turn it off.
HOLD Touch this area to operate the thermostat as
a manual thermostat. It will keep the temperature
you set until you change it or cancel HOLD.
PG 5
Loading...