3Com B-446, B-406, B-506 User Manual

0 (0)

WELLS BLOOMFIELD, LLC

162

2 ERIK CIRCLE, P. O. Box 280 Verdi, NV 89439 telephone: 775-689-5703

fax: 775-689-5976 www.wellsbloomfield.com

Model B-406

Model B-446

OPERATION MANUAL

for

BUILT-IN

ELECTRIC CHAR BROILERS

Models:

B-406

B-446

B-506

includes:

INSTALLATION, USE and CARE

IMPORTANT: DO NOT DISCARD THIS MANUAL

This manual is considered to be part of the appliance and is to be given to the OWNER or MANAGER of the restaurant, or to the person responsible for TRAINING OPERATORS of this appliance. Additional manuals are available from your WELLS DEALER.

THIS MANUAL MUST BE READ AND UNDERSTOOD BY ALL PERSONS USING OR INSTALLING THIS APPLIANCE. Contact your WELLS DEALER if you have any questions concerning installation, operation or maintenance of this equipment.

 

 

 

PRINTED IN UNITED STATES OF AMERICA

 

 

 

p/n 303673 Rev. D ECN-13371

M162 071025 cps

LIMITED WARRANTY STATEMENT

Unless otherwise specified, all commercial cooking equipment manufactured by WELLS BLOOMFIELD, LLC is warranted against defects in materials and workmanship for a period of one year from the date of original installation or 18 months from the date of shipment from our factory, whichever comes first, and is for the benefit of the original purchaser only.

THIS WARRANTY IS THE COMPLETE AND ONLY WARRANTY, EXPRESSED OR IMPLIED IN LAW OR IN FACT, INCLUDING BUT NOT LIMITED TO, WARRANTIES OF MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE, AND/OR FOR DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES IN CONNECTION WITH WELLS BLOOMFIELD PRODUCTS. This warranty is void if it is determined that, upon inspection by an authorized service agency, the equipment has been modified, misused, misapplied, improperly installed, or damaged in transit or by fire, flood or act of God. It also does not apply if the serial nameplate has been removed, or if service is performed by unauthorized personnel. The prices charged by Wells Bloomfield for its products are

based upon the limitations in this warranty. Seller’s obligation under this warranty is limited to the repair of defects without charge by a Wells Bloomfield factory authorized service agency or one of its sub-service agencies. This service will be provided on customer’s premises for non-portable models. Portable models (a device with a cord and plug) must be taken or shipped to the closest authorized service agency, transportation charges prepaid, for service. In addition to restrictions contained in this warranty, specific limitations are shown in the Service Policy and Procedure Guide. Wells Bloomfield authorized service agencies are located in principal cities. This warranty is valid in the United States and Canada and void elsewhere. Please consult your classified telephone directory, your foodservice equipment dealer or contact:

Service Department, Wells Bloomfield, LLC P.O. Box 280, Verdi, Nevada 89439

phone (775) 689-5707 or fax (775) 689-5976

for information and other details concerning warranty.

SERVICE POLICY AND PROCEDURE GUIDE and ADDITIONAL WARRANTY EXCLUSIONS

1.Resetting of safety thermostats, circuit breakers, over load protectors, and/or fuse replacements are not covered by this warranty unless warranted conditions are the cause.

2.All problems due to operation at voltages or phase other than specified on equipment nameplates are not covered by this warranty.

Conversion to correct voltage and/or phase must be the customer’s responsibility.

3.All problems due to electrical connections not made in accordance with electrical code requirements and wiring diagrams supplied with the equipment are not covered by this warranty.

4.Replacement of items subject to normal wear, to include such items as knobs, light bulbs; and, normal maintenance functions including adjustments of thermostats, adjustment of micro switches and replacement of fuses and indicating lights are not covered by warranty.

5.Damage to electrical cords and/or plug due to exposure to excessive heat are not covered by this warranty.

6.Full use, care, and maintenance instructions supplied with each machine. Noted maintenance and preventative maintenance items, such as servicing and

cleaning schedules, are customer responsibility. Those miscellaneous adjustments noted are customer responsibility. Proper attention to preventative maintenance and scheduled maintenance procedures will prolong the life of the appliance.

7.Travel mileage is limited to sixty (60) miles from an Authorized Service Agency or one of its sub-service agencies.

8.All labor shall be performed during regular working hours. Overtime premium will be charged to the buyer.

9.All genuine Wells replacement parts are warranted for ninety (90) days from date of purchase on nonwarranty equipment. This parts warranty is limited only to replacement of the defective part(s). Any use of non-genuine Wells parts completely voids any warranty.

10.Installation, labor, and job check-outs are not considered warranty and are thus not covered by this warranty.

11.Charges incurred by delays, waiting time or operating restrictions that hinder the service technician’s ability to perform service are not covered by warranty. This includes institutional and correctional facilities.

SHIPPING DAMAGE CLAIM PROCEDURE

NOTE: For your protection, please note that equipment in this shipment was carefully inspected and packaged by skilled personnel before leaving the factory. Upon acceptance of this shipment, the transportation company assumes full responsibility for its safe delivery.

IF SHIPMENT ARRIVES DAMAGED:

1.VISIBLE LOSS OR DAMAGE: Be certain that any visible loss or damage is noted on the freight bill or express receipt, and that the note of loss or damage is signed by the delivery person.

2.FILE CLAIM FOR DAMAGE IMMEDIATELY:

Regardless of the extent of the damage.

3.CONCEALED LOSS OR DAMAGE: if damage is unnoticed until the merchandise is unpacked, notify the transportation company or carrier immediately, and file “CONCEALED DAMAGE” claim with them. This should be done within fifteen (15) days from the date the delivery was made to you. Be sure to retain the container for inspection.

Wells Bloomfield cannot assume liability for damage or loss incurred in transit. We will, however, at your request, supply you with the necessary documents to support your claim.

Charbroilers Electric In-Built for OpManual 303673 162

xi

TABLE OF CONTENTS

WARRANTY

xi

SPECIFICATIONS

1

FEATURES & OPERATING CONTROLS

2

PRECAUTIONS & GENERAL INFORMATION

4

AGENCY LISTING INFORMATION

4

INSTALLATION

5

OPERATION

7

BROILER CHART

9

TROUBLESHOOTING SUGGESTIONS

10

CLEANING INSTRUCTIONS

11

PARTS & SERVICE

13

CUSTOMER SERVICE DATA

13

 

 

Thank you for purchasing this Wells Bloomfield appliance.

Proper installation, professional operation and consistent maintenance of this appliance will ensure that it gives you the very best performance and a long, economical service life.

This manual contains the information needed to properly install this appliance in a manner which will ensure its optimum performance.

162 303673 OpManual for Built-In Electric Charbroilers

SPECIFICATIONS

 

 

 

 

AMPS PER LEG 3ø

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

NEUT

AMPS

FIELD

MODEL

ELEMENT

VOLTS

KW

L1

L2

L3

.

WIRING

 

SINGLE

208

5.5

12.9

12.9

22.4

N/A

26.0

3ø 10 ga.

B-406

 

 

 

 

 

 

 

1ø 8 ga.

 

 

 

 

 

 

 

 

ASSEMBLY

240

5.5

11.2

11.2

19.4

N/A

22.5

90 g

 

 

 

 

 

 

 

 

 

 

 

SINGLE

208

5.5

11.5

22.4

14.4

N/A

26.0

3ø 10 ga.

B-446

 

 

 

 

 

 

 

1ø 8 ga.

 

 

 

 

 

 

 

 

ASSEMBLY

240

5.5

10.0

19.5

12.5

N/A

22.5

90 g

 

 

 

 

 

 

 

 

 

 

 

 

 

DUAL

208

11.0

30.0

30.0

30.0

N/A

-

3ø 8 ga.

B-506

 

 

 

 

 

 

 

1ø 4 ga.

ASSEMBLIES

240

11.0

26.0

26.0

26.0

N/A

45.0

 

90g

 

 

 

 

 

 

 

 

 

 

 

 

NOTE: Refer to appropriate Installation Instructions for equipment dimensions, cut-out dimensions, clearances, etc.

1

FEATURES & OPERATING CONTROLS

ITEM

TEMPERATURE CONTROL

INDICATOR LIGHT

HEATING ELEMENT

ASSEMBLY

ELEMENT GUARD / GRATE

ELEMENT SUPPORT ROD

DRIP PAN

DATA PLATE

WELLSLOKS

COMMENT

The char-broiler is INFINITE SWITCH CONTROLLED. Power is applied to the heating elements based on the control knob position and the amount of energy used.

Light will glow when the infinite switch is in any position other that OFF.

The char-broiler element assembly may be raised for cleaning, or to add water to the drip pan. It is held the “up” position by a support rod which automatically engages as the element is raised.

The grate is designed to protect the individual elements from food contact and spatula abrasion, resulting in prolonged element life and reduced carbonization. The grate is easily removed for cleaning.

IMPORTANT: Always remove the grate before lifting the element assembly.

Hold element assembly in up position. Engages automatically when the element assembly is raised.

IMPORTANT: Remember to dis-engage the support rod before lowering element assembly

The heavy-duty removable drip pan is located under the element

IMPORTANT: DO NOT pour water over elements to refill drip pan.

assembly. The drip pan catches food particles and grease drippings during broiler operation. Maintain 2 inches of water in the drip pan at all times during operation of the broiler. The drip pan is easily removed for cleaning.

Gives manufacturer, make, model and serial number. Also voltage and phase information, and agency approvals.

The broiler is equipped with WELLSLOKS, uniquely designed turnout tabs, which help secure the broiler to the countertop. (See Installation Instructions supplied with the particular appliance for details.)

Charbroilers Electric In-Built for OpManual 303673 162

2

3Com B-446, B-406, B-506 User Manual

FEATURES & OPERATING CONTROLS (continued)

162 303673 OpManual for Built-In Electric Charbroilers

Fig. 1 Built-In Electric Charbroiler

Fig. 2 Wellsloks

3

Loading...
+ 11 hidden pages