Transformer
3B SCIENTIFIC® PHYSICS
Transformer 12 V, 25 VA (230 V, 50/60 Hz) 1000866
Transformer 12 V, 25 VA (115 V, 50/60 Hz) 1000865
Instruction sheet
10/12 ALF
1 Transformer for 115 V mains
voltage (1000865)
2 Transformer for 230 V mains
voltage (1000866)
1. Safety instructions
The transformer 12 V, 25 VA conforms to all
safety regulations for electrical measuring, control,
monitoring and laboratory equipment, as specified
under DIN EN 61010, Section 1, and the equipment has been designed to meet protection
class II. It is intended for operation in a dry environment, suitable for the operation of electrical
equipment and systems.
Safe operation of the equipment is guaranteed,
provided it is used correctly. However, there is
no guarantee of safety if the equipment is used
in an improper or careless manner.
If it may be assumed for any reason that nonhazardous operation will not be possible (e.g. visible damage), the equipment should be switched
off immediately and secured against any unintended use.
In schools and other educational institutions, the
operation of the power supply unit must be supervised by qualified personnel.
• Before using the transformer for the first
time, confirm that the specifications printed
on the housing are compatible with the local
mains voltage.
• Before using the transformer, check it for
any damage. In the event of any malfunction/operational defect or visible damage,
switch off the unit immediately and secure it
against unintended use.
2. Description
The transformer supplies an AC voltage of 12 V
for student experiments. It is especially suitable
as a power source for the optical lamp K
(1000863).
It is moulded in an impact-resistant plastic block,
is protected against short-circuiting, and is provided with two 4 mm safety plugs.
The transformer is available in 2 versions for
differing mains voltages. The transformer with the
order number 1000866 is for mains supplies of
230 V (±10%) while the one with order no.
1000865 is for 115 V (±10%) systems.
1
Loading...