100 Percent MPUW1801 User Manual
ISV_4-21-17
Toggle Wi-Fi Socket
MPUW1801
User Manual
Appliance Control
• Built-in WIFI module and buzzer
• Smart alarm siren function
• Life-time cloud service is included
• Auto WIFI set up with APP
• Individual socket setting from your smartphone
Energy Monitoring
• Graphical representation of energy consumption
Schedule Timers
• Set timers for automatic switching of devices
Getting started
Congratulations on your purchase of this powerful WIFI Socket. This product works together with your Android or iOS mobile device and
Internet via Wi-Fi. Please check that your mobile device is up to date and running the latest version of it’s operating system. Please also check
that your WIFI router is working properly and that its operating manual confirms that it operates on 2.4 GHz with WPA/WPA2 encryption.
Power Rating
• Input AC120V, 60Hz, max.15A
• Consumption: typ. <1W
Operating Conditions
• Temperature 0-60ºC (32-140ºF)
• Relative Humidity 10% -98% (without dew formation)
Storage Conditions
• Temperature -20 to +85ºC
• Relative Humidity 5% - 99% (without dew formation)
Dimensions : 60 x 72 x 60 mm
The Wi-Fi socket will only work on a 2.4GHz Wi-Fi connection, NOT a 5GHz connection. 2.4GHz is the
standard connection for most routers, and 5GHz connections will typically have “5G” appended to
the end of the router’s network name.
Installing the APP
1 2 3
Select “Sign UP” Input your email and passwordInstall the APP
1. Search Homelink by 100 Percent on the Apple App Store (for iOS devices) and the Google Play Store (for Android devices). Accept
any terms and conditions and install. Ensure your phone is connected to WIFI to complete your account setup.
2. Launch the HomeLink APP and select “Sign Up” if you do not have an account.
3. Now complete your User Profile by inputting your email address and a 6 - 20 character password. An activation email will be sent to
your email account to complete the sign up process.
4. You can now view the Instruction Manual on the HomeLink app by :
Setting up the Wi-Fi SOCKET
1
“Home” Page > Select “+”
3
WPS/
Reset
Press WPS button on your router
OR
Input Wi-Fi password > scan the QR CodeSelect “+” > Press “Start”
4
Press “Pairing”Plug in socket, long press the button >
2
BLUE LED light ON = PAIRING FINISHED
1. Once connected to your Wi-Fi network, open the HomeLink app. On the Home page, select the “+“ icon in the socket section. When
ready, tap the “start“ button.
2. Input your Wi-Fi network’s password (if any) and tap the “Scan QR Code“ section at the bottom of the screen. Scan the QR code on the
socket or on the QR code card.
3. If your Wi-Fi router supports WPS function (Wi-Fi Protected Setup), it is highly recommended to press the WPS button before powering
up your socket. (Please follow the instruction of your router model to enter WPS mode). Skip this process if your router does not
support WPS.
4. Plug the socket in and long press the button on the Wi-Fi socket until a beep is heard to enter pairing mode. Tap the Pairing button on
the screen and wait for the socket to pair.
• If successful, 1 long beep and 2 short beeps will be heard and the LED indicator will turn solid BLUE.
• If the pairing attempts time out, 1 long beep and 3 short beeps will be heard and “Pairing Time Out“ will be displayed in the app while
the LED indicator continues to flash BLUE.
To attempt to pair again, you will need to repeat the Connecting to the Homelink App section.
Connecting to Amazon Alexa
1. After your device has been successfully paired to the socket, open the Alexa app and go to the “Skill“ page, then search “Homelink“.
2. Once found, press the details of the Homelink skill page and select “Enable Skill“.
3. Fill in the username and password for your HomeLink account that you previously set up. After a successful login, go back to the Skill
page and select “Discover Devices“.
4. When Alexa responds “Discover Finished“, the socket will be recognized.
You can use Alexa to turn the socket ON/OFF.
Loading...