WA-120
Portable Wireless PA
OWNER’S MANUAL
CONTENTS |
|
INTRODUCTION..................................................................................... |
2 |
CONTROLS AND CONNECTIONS........................................................ |
3 |
OPERATING INSTRUCTIONS FOR THE NADY WA-120..................... |
5 |
WA-120 WIRELESS MICROPHONE RECEIVER OPERATION............ |
8 |
WHT HANDHELD MICROPHONE TRANSMITTER.............................. |
9 |
WLT LAVALIER/HEADMIC BODYPACK TRANSMITTER.................... |
9 |
SPECIFICATIONS................................................................................ |
12 |
SERVICE.............................................................................................. |
12 |
1
INTRODUCTION
Thank you for purchasing a Nady WA-120 Wireless Portable P.A.—and congratulations on your choice. The WA-120 is the most affordable and compact of the popular line of Nady wireless P.A.’s. Ideal for many applications, including use in classrooms, conference/meeting rooms, churches, health clubs and small auditoriums, it is powerful, yet lightweight and easily portable. We are sure you will find this versatile system a powerful and useful tool for your presentations.
The Nady WA-120 includes a full-range speaker system with built-in amplifiier, mixer, and high band VHF wireless receiver.
Special features include:
•Powerful 20W maximum audio power output
•Built-in echo/reverb
•1/4” unbalanced input jacks (1 MIC, 1 AUX) and one 1/4” unbalanced RECORD OUT, Volume, treble and bass and echo/reverb controls
•Wireless system features noise-reduction companding circuitry for quietest operation with a wide dynamic range.
•Available with choice of WHT handheld Mic or WLT Lavalier/headset Mic bodypack transmitters. One WA 120 wireless P.A. and one WHT or WLT Transmitter on the same channel comprise a system.
•Powered externally with provided Universal Voltage 110V-240V AC adapter, or internally with either 8 “D” cell alkaline or rechargeable batteries or the optional RB-120 rechargeable battery
•Convenient internal built-in charger for optional RB-120 rechargeable battery
•Small and lightweight—only 8.3” x 10.6” x 5.4” (211 x 270 x 137mm) and 5.3 lbs. (2.4 Kg)
2
CONTROLS AND CONNECTIONS
1.Wireless mic receiver antenna Pull out and extend fully for optimum range
2.Power ON/OFF switch
3.MIC and AUX signal input jacks ¼” TS (mono)
4.Speaker
5.Power ON LED indicator
6.RF ON LED indicator Indicates reception of transmitter signal
7.Volume controls
8.Tone controls
9.Line/Record out jack Provides signal for recording or additional
amplification
10.Echo level control Controls the amount of echo/reverb in the channel signal
5 |
6 |
7 |
1 |
|
8 |
|
|
|
2 |
MIC/TS |
|
|
9 |
|
|
|
|
10 |
|
LINE/REC OUT |
3 |
|
|
4
3