Inter-tel 8560, 8660 User Manual

Model 8560/8660

User Guide

QUICK REFERENCE GUIDE TO

FREQUENTLY USED FEATURES

These are the basic instructions for the most frequently used telephone and voice mail features for Inter-Tel endpoints. For detailed information about these and other features, refer to the complete instructions in the appropriate user guide.

PLACING AN INTERCOM CALL

1.Dial an extension number.

2.If your call goes through handsfree to the called endpoint’s speaker, speak after you hear a double tone.

If you hear continuous ringing, wait for the call to be answered.

PLACING AN OUTSIDE CALL

1.With or without the handset lifted, press OUTGOING or dial the Outgoing Call feature code (the default feature code is 8 ).

2.Dial the desired number. (If you hear a single progress tone, you must dial an account code before you can place your call.)

ANSWERING AN INTERCOM OR OUTSIDE CALL

EITHER, Respond handsfree (if enabled).

OR, Lift the handset for privacy.

OR, Press

,

, or

.

SPKR

ANSWER

OR, Press the flashing

(Intercom) button.

IC

PLACING A CALL ON HOLD

While on a call, press

or

. Hang up or place another call. To return to

HOLD

the call, lift the handset an then press

,

, or the flashing button.

HOLD

PLACING AN EMERGENCY CALL

Dial

(in the U.S.) or

(in Europe) to automatically place a

9

1

1

9

9

9

call to the system’s programmed emergency number. You do not have to select an outside line first.

CAUTION

If you are using an IP or SIP endpoint, consult your system administrator and your local Inter-Tel servicing company for important information about dialing emergency services before you begin using it.

© Inter-Tel, Inc. January 2005 printed in US

Part no. 835.2449-4

1

PLACING A CONFERENCE CALL

1.	While on the first call, press		. The call is now on hold.
		CNF
2.	Place an intercom or outside call, then press the flashing						button to
				CNF
	place the call on hold. (If necessary, repeat this step to place a third call on
	hold.)

3.Press the flashing CNF button to join all of the calls together in the conference.

NOTE: Conference calls are limited to three parties on SIP endpoints.

FORWARDING CALLS

1.Press FWD . (Six-line display model users must then select a menu button.)

2.Do one of the following:

•To forward to an outside telephone number: Select an outside line and dial a telephone number.

•To forward to an extension number: Dial the extension number.

•To forward to your voice mailbox: Dial the voice mail extension.

To cancel call forwarding:

1. Press FWD .

2. If you have a six-line display endpoint, press the FWD OFF menu button.

If you have a non-display or two-line display endpoint, press , SPKR , or lift and replace the handset.

RESPONDING TO A WAITING CALL

If you hear a “call waiting” tone through your handset or headset, either end your current call or place it on hold. Then press , SPKR , ANSWER , or the flashing button.

CHANGING VOLUME LEVELS

EITHER, Press the high ( ) or low ()end of the Volume button. OR, Press the Up or Down arrow on the Volume button.

OR, Press the VOL UP or VOL DN button.

To save your change:

EITHER, Press both ends of the Volume button at the same time. OR, Press the middle of the Volume button.

OR, Press both VOL UP and VOL DN buttons at the same time.

REDIALING A NUMBER

Select an outside line and press REDIAL or dial 3 8 0 . The number is automatically dialed.

2

PAGING

1. Lift the handset and press PAGE or dial 7 .

2.Dial the desired page zone number (0-9).

3.After the tone, make your announcement and hang up.

NOTE: The Page feature is not supported in SIP mode.

TRANSFERRING A CALL TO AN EXTENSION/OUTSIDE NUMBER

1. Press TRANSFER or XFR .

2.Dial the desired extension or telephone number.

3.Wait for an answer, announce the call, and then hang up.

If the number is busy, there is no answer, or the transfer is refused, press ,

			, or the flashing button to return to the caller. (Press				for SIP
	SPKR
	mode.)
TRANSFERRING A CALL TO VOICE MAIL
1. Press				or		.
		TRANSFER			XFR

2.Dial the voice mail extension number.

3.Hang up to send the call to the voice mail menu (so that the caller can enter the mailbox number).

USING REVERSE TRANSFER (CALL PICKUP)

1.Lift the handset and dial 4 .

2.Dial the extension number where the call is ringing or holding.

ACCESSING YOUR MAILBOX

NOTE: If your voice mail system has Automatic Speech Recognition (ASR) capability and it is enabled for your mailbox, you can complete voice mail tasks by issuing spoken commands or by pressing dialpad digits.

If your MSG button is lit and you have a message from voice mail:

1. Lift the handset or press or press SPKR .

2.Press MSG. A call is automatically placed to the voice mail system.

3.Enter your personal password and press # .

If your MSG button is not lit:

1.Dial the voice mail extension number. (You hear the main menu.)

2.During or after the greeting, say “Login” or press to identify yourself as a subscriber.

3.Say or enter your mailbox number.

4.Enter your mailbox password (if programmed). Then press # .

3

ACCESSING VOICE MAIL MESSAGES

1.Access your mailbox as described on page 3.

2.If E-Mail Reader is enabled for your mailbox, say “Voice Mail” or press 1 . If E-Mail Reader is not enabled for your mailbox, skip this step.

3.Select one of the following:

•	Say “New” or press					to listen to new messages.
			1
•	Say “Saved” or press						to listen to saved messages.
				3

4. While you are listening to a message, you can use the following options:

•

Say “Skip” or press

to skip to the end of the recording.

#

•

Say “Backup” or press

to back up.

1

•

Say “Pause” or press

to pause. (Press

to continue.)

2

#

•

Say “Forward” or press

to skip ahead.

3

•

Say “Lower” or press

to lower the volume.

4

•

Say “Envelope” or press

to play the message envelope.

5

•

Say “Higher” or press

to raise the volume.

6

•

Say “Save” or press

to save the new message in your mailbox.

7

•

Say “Delete” or press

to delete the message from your mailbox.

9

5. When the message has finished playing, you have the following options:

•

Say “Replay” or press

to replay the message from the beginning.

1

•

Say “Reply” or press

to reply to the message.

2

•

Say “Forward” or press

to forward a copy of the message.

3

•

Say “Previous” or press

to listen to the previous message.

4

•

Say “Envelope” or press

to play the introductory message envelope.

5

•

Say “Next” or press

to listen to the next message.

6

•Say “Save” or press 7 to save the new message in your mailbox.

•Say “Delete” or press 9 to delete the message from your mailbox.

RECORDING AND SENDING VOICE MAIL MESSAGES

1.Access your mailbox as described on page 3.

2.Say “Record” or press 2 .

3.Say or enter the mailbox number where you want to leave the message.

4. Say “Yes” or press # to accept the subscriber’s name.

5.Record your message after the tone.

6.When finished, hang up to deliver the message or press # to access more options.

4

MESSAGE OPTIONS*

Below is a summary of the options you can use when accessing messages, after playing messages, and when recording voice mail messages.

#	LISTENING TO MSG	AFTER MSG PLAYS	LEAVING MSG
1	Back Up	Replay the	Replay the
		message	message
2	Pause	Reply to the	Append the
		message	message
3	Skip forward	Forward a copy	Erase and
			re-record
4	Lower volume	Listen to previ-	—
		ous msg
5	Play envelope	Play envelope	—
6	Increase vol-	Listen to next	—
	ume	message
7	—	Save the	—
		message
8	—	—	—
9	—	Delete the	Access deliv-
		message	ery options
*	—	—	Cancel
#	Skip to end	—	Send message
			and exit

*Message options vary based on media type.

FEATURE CODES*

CODE	FEATURE NAME	CODE	FEATURE NAME
391	Account Code – All Calls	324	Hunt Group Remove/Replace
390	Account Code – Optional	303	LCD Contrast Control
326	ACD Agent Log In	365	Message
327	ACD Agent Log Out	366	Message - Cancel Msg Left
328	ACD Agent Log In/out	368	Message -Cancel Msg On Endpt.
329	ACD Agent Wrap-up Term.	367	Message - Silent
375	Agent Help Request	314	Microphone Mute
376	Agent Help Reject	7	Page
361	Automatic Intercom Access	325	Page Remove/Replace
360	Automatic Line Access	397	Program Buttons
350	Automatic Line Answer	392	Program Station Password
313	Background Music	6	Queue (Callback) Request
355	Call Forward All Calls	385	Record-A-Call
357	Call Forward If Busy	380	Redial
356	Call Forward If No Answer	331	Redirect Call
358	Call Fwd. If No Answer/Busy	305	Reminder Message
5	Conference	306	Reminder Message Cancel
394	Default Station	359	Remote Programming
307	Directory	4	Reverse Transfer
300	Display Time And Date	396	Review Buttons
372	Do-Not-Disturb On/Off	377	Ring Intercom Always On/off
373	Do-Not-Disturb Override	398	Ring Tone Selection
395	Feature Button Default	382	Station Speed Dial
312	Group Listen	383	Station Speed Dial Program
319	Handsfree On/Off	354	System Forward On/Off
317	Headset On/Off	381	System Speed Dial
336	Hold – Individual	399	Switch Keymap
335	Hold – System	346	Transfer To Hold
330	Hookflash (Recall in Europe)	345	Transfer To Ring

*Some feature codes may not apply to your endpoint. For a list of feature codes specific to your endpoint, consult the user guide.

TELEPHONE SYSTEM AND

VOICE MAIL FEATURE GUIDE

USING VOICE MAIL

To access your mailbox:

1.Dial the voice mail extension number.

2.Say “Login” or press and say or enter your mailbox number.

3.Enter your password and press # .

4.Voice mail plays the main menu for your mailbox type and guides you through the available options.

STANDARD VOICE MAILBOX MAIN MENU:

TO...	SAY	PRESS
Access new voice mail messages	“New”	1
Record voice mail messages	“Record”	2
Access saved voice mail messages	“Saved”	3
Access personal mailbox options	“Personal”	4
Access message options	“Options”	5
Disable Automatic Speech Recognition	“Disable”	8

ADVANCED MAILBOX MAIN MENU:

TO...	SAY	PRESS
Access voice mail messages	“Voice mail”	1
Record voice mail messages	“Record”	2
Access e-mail messages	“E-mail”	3
Access personal mailbox options	“Personal”	4
Access message options	“Options”	5
Access faxes	“Facsimile”	6
Disable Automatic Speech Recognition	“Disable”	8

REMOTE FEATURE ACCESS

Remote Feature Access allows you to change your station password, place your endpoint in Do-Not-Disturb mode, and forward calls from another endpoint or through a special dial-up line.

If you do not hear a tone after each step, or if you hear repeating tones, you have made a mistake or the feature is restricted. Start over.

To use Remote Feature Access:

1.EITHER, call _______________ (number provided by your system administrator). If required, enter your password.

OR, use any endpoint on the system.

2.Enter 3 5 9 .

3.Enter your extension number.

4.Enter your password and press # . You can now use the features described below and at right.

To change the station password:

1.Enter 3 9 2 .

2.Enter your current password and press # .

3.Enter the new password and press # .

4.Enter the new password again for verification and press # .

To turn on Do-Not-Disturb:

1.Enter 3 7 0 .

2.Enter message number 01-20 (see the default DND message list below).

3.If desired, enter the optional second-line message text (see the dialpad character chart on the next page).

4.Hang up.

To turn off Do-Not-Disturb:

Enter 3 7 1 and hang up.

DO-NOT-DISTURB MESSAGES

01	DO-NOT-DISTURB	11	OUT OF TOWN ’TIL
02	LEAVE A MESSAGE	12	OUT OF OFFICE
03	IN MEETING UNTIL	13	OUT UNTIL
04	IN MEETING	14	WITH A CLIENT
05	ON VACATION* ’TIL	15	WITH A GUEST
06	ON VACATION*	16	UNAVAILABLE
07	CALL ME AT	17	IN CONFERENCE
08	AT THE DOCTOR	18	AWAY FROM DESK
09	ON A TRIP	19	GONE HOME
10	ON BREAK	20	OUT TO LUNCH

*VACATION is replaced by HOLIDAY in European systems.

DIALPAD CHARACTERS

	NUMBER OF TIMES BUTTON IS PRESSED
BUTTON	1	2	3	4	5
1	-	&	(	)	1
2	A	B	C	'	2
3	D	E	F	!	3
4	G	H	I	*	4
5	J	K	L	# or /	5
6	M	N	O	Ñ or #	6
7	P	Q	R	S	7
8	T	U	V	?	8
9	W	X	Y	Z	9

NOTE: The characters associated with the 5 and 6 dialpad digits are dependent on the software version.

To turn on Call Forward:

1. Enter one of the following Call Forward feature codes:

All Calls	355
If No Answer	356
If Busy	357
If No Answer/Busy	358

2.Enter an extension number or enter a line access code followed by an outside telephone number.

3.Hang up.

To turn off Call Forward:

1.Enter 3 5 5 .

2.Press # and hang up.

Notice

This Inter-Tel® user guide is released by Inter-Tel, Inc. as a guide for end-users. It provides information necessary to use the Model 8560 and 8660 IP endpoint. The contents of this user guide, which reflect current Inter-Tel standards, are subject to revision or change without notice. Some features or applications mentioned may require a future release and are not available in the initial release. Future product features and applications are subject to availability and cost. Some features or applications may require additional hardware and/or specific software.

Some system features can only be accessed by an administrator. For information about these features, see the Frequently Asked Questions on page 95.

For sales, service, or technical support, contact your local authorized Inter-Tel provider.

Comments about this user guide or other technical documentation should be directed to Inter-Tel’s Technical Publications Department at: [e-mail]

All products and services mentioned in this publication are the trademarks, service marks, registered marks, or registered service marks of their respective owners.

Inter-Tel®, Axxess®, and Enterprise® are registered trademarks of Inter-Tel, Incorporated.

Microsoft® and Outlook® are registered trademarks of Microsoft Corporation.

PRODUCT DISPOSAL INSTRUCTIONS

This symbol indicates that the product is classified as electrical or electronic equipment and should not be disposed of with other commercial or household waste at the end of its working life. For appropriate disposal and recycling instructions, contact your local recycling authority or Inter-Tel provider.

The Waste of Electrical and Electronic Equipment (WEEE) Directive (2002/96/EC) was established by the European Union to minimize negative impact on the environment, control hazardous substances, and curtail landfill expansion by using the best available recovery and recycling techniques.

Table of Contents

CONTENTS PAGE

FINDING YOUR WAY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Welcome. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

About This Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

About Your Endpoint . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

About Voice Mail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

What You See and Hear . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Software Compatibility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

GETTING STARTED . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Adjusting Your Endpoint’s Viewing Angle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Adjusting Your Endpoint’s LCD Contrast . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Setting Up Voice Mail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Making and Receiving Calls. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 Placing Calls On Hold. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 Placing Conference Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 Transferring Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 Using Reverse Transfer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 Forwarding Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 Redialing a Number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 Displaying Information on Your Endpoint . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 Using a Headset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 Using the Speaker and Microphone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 Using the Message Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 Accessing Your Mailbox. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 Disabling and Enabling ASR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38 Accessing Voice Mail Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39 Using Do-Not-Disturb Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45 Using Reminder Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47

© Inter-Tel, Inc. March 2006 printed in US	iii

STARTED GETTING WAY YOUR FINDING

MORE LEARNING READER MAIL-E USING ON MOVING

CONTENTS

PAGE

MOVING ON . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50

Setting Endpoint Preferences . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50

Setting Mailbox Preferences . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53

Speed Dialing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60

Using Record-A-Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63

Paging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64

Performing a “Hookflash” During a Call. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65

Programming Your Feature Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65

Programming Direct Station Selection Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66

Programming Secondary Extension Buttons. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67

Using Account Codes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68

Screening Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69

Using Call Logging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70

Using Directories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71

Programming Remote Feature Access . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76

Requesting Agent Help. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78

Working in Hunt Groups. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79

USING E-MAIL READER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84

E-Mail Reader Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85

Using Your Advanced Mailbox. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86

Setting Up Your E-Mail Password . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87

Accessing E-Mail Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89

Using Main Menu E-Mail Reader Count . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91

Accessing Fax Messages. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92

Recovering Deleted Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93

Changing Message Envelopes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94

Voice Mail Flowchart (Advanced Mailbox) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95

LEARNING MORE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98 What the Administrators Can Do for You . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98 Frequently Asked Questions (FAQs). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99 Default Feature Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102

INDEX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107

iv

Finding Your Way

SECTION CONTENTS

PAGE

Welcome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

About This Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

About Your Endpoint . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Model 8560/8660 Connectors . . . . . . . . . . . . . . . . . . . . . . . . . 4

IP Endpoint Exceptions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Feature Button Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

LCD and Menu Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Message Indicator Lamp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

DSS/BLF and Mini-DSS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

About Voice Mail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Enterprise Messaging. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Automatic Speech Recognition (ASR) . . . . . . . . . . . . . . . . . . 12

What You See and Hear. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Software Compatibility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

WAY YOUR FINDING

Inter-Tel® Model 8560/8660 User Guide	1

FINDING YOUR WAY

WELCOME

Your new Model 8560 digital or 8660 IP endpoint provides access to several features, each of which is described in this guide. The About This Guide section below lists the different sections in this user guide and describes the type of information you can find there. If you need to access information quickly, refer to the Quick Reference Guide attached to the front of this guide. You can also tear out the pocket guide to keep as a handy reference for features you are likely to use while away from the office (Remote Feature Access and Voice Mail).

Because the Model 8560 and Model 8660 look and function similarly (see page 5 for IP exceptions), the instructions for using the endpoint features for these two endpoints are combined in this single user guide.

ABOUT THIS GUIDE

This guide contains instructions for using the Model 8560 and 8660 IP on the InterTel® telephone system. To help you find information more quickly, this guide is divided into five separate sections, as indicated by the tabs.

These sections include the following:

•Finding Your Way: This section provides you with a picture of the endpoints and includes general information designed to help you find what you need.

•Getting Started: This section includes basic endpoint and voice mail information, and provides instructions on how to perform everyday tasks, such as answering calls, making calls, and using voice mail.

•Moving On: In this section you’ll learn how to use advanced endpoint and voice mail features.

•Using E-Mail Reader: This section includes information on how to use the advanced messaging features available with E-Mail Reader.

•Learning More: This section outlines how your administrators can help if you experience a problem with your endpoint. It also provides you with a list of Frequently Asked Questions (FAQs) so you can troubleshoot problems and learn more about the system.

In addition, this guide contains a list of default feature codes (see page 100) and an index (see page 105) for easy reference.

NOTE: Because the telephone system is very flexible and programmable, the procedures for using the features might vary slightly from the descriptions in this guide. If so, your trainer or system administrator can tell you how your system differs and how to use the features.

2	Inter-Tel® Model 8560/8660 User Guide

ABOUT YOUR ENDPOINT

Your Model 8560/8660 endpoint has three basic types of buttons in addition to a display and a Message Indicator lamp.

•Dialpad buttons: Allow you to enter numbers and letters.

•Feature buttons: Provide quick access to various telephone and voice mail features.

•Liquid Crystal Display (LCD) menu buttons: Allow you to scroll through displays and make selections based on the active feature.

Internal Speaker

LCD With Six

16-Character Lines

Speaker

Button

Hearing Aid-Compatible

(HAC) Handset

Message Indicator Lamp

Ring and Voice			LCD Menu
Volume Control				Buttons
				Hold Button
					Special
						Button

12-Button Dialpad

Feature Buttons

Handsfree Microphone

(Underneath Edge)

NOTE: This is the default configuration. Your buttons may have been programmed differently. If you are uncertain about the configuration, ask your system administrator.

WAY YOUR FINDING

Inter-Tel® Model 8560/8660 User Guide	3

FINDING YOUR WAY

Model 8560/8660 Connectors

The Model 8560 digital and 8660 IP endpoints have jacks and ports (Model 8660 only) on the back used for various connections. The back of the Model 8560 has jacks for headset and handset connections only. Because the Model 8560 is a digital endpoint, it does not include the PC and power connectors included on the Model 8660.

The Model 8660 IP endpoint has additional power and PC connectors that are required for an IP endpoint. Two light-emitting diodes (LEDs) on the PC ports and LAN/Power jack indicate link status and the speed of the connections.

The diagram below shows the connectors for the Model 8560/8660 endpoints. These connectors include:

•Headset Jack: Connects to a headset (Model 8560 and 8660).

•Handset Jack: Connects to a handset (Model 8560 and 8660).

•24 V Power Jack: Connects to a 24VDC external power supply (Model 8660 only).

•Personal Computer (PC) Ports 1-3: Connect to PCs or any other 10/100 Ethernet devices (Model 8660 only).

•LAN/Power Jack: Connects to a network hub or a switch (Model 8660 only).

Back of Endpoint

Headset Jack

Handset Jack

Model 8660 Only

PC Ports 1-3

		LAN/ Power Jack
24V Power Jack

4	Inter-Tel® Model 8560/8660 User Guide

IP Endpoint Exceptions

The Model 8660 IP endpoint looks and functions almost identically to the Model 8560. The only exceptions are:

•The Model 8660 has additional ports on the back that are used for Internet and power connections (see page 4).

•The Model 8660 does not support the DSS/BLF unit (see page 8).

•The Model 8660 does not support the Off-Hook Voice Announce feature (see page 23).

•The Model 8660 does not support the Enhanced Speakerphone Mode feature (see page 35).

CAUTION

Consult your system administrator and your local Inter-Tel servicing company for important information about dialing emergency services from your IP endpoint before you begin using it.

WAY YOUR FINDING

Inter-Tel® Model 8560/8660 User Guide	5

FINDING YOUR WAY

Feature Button Functions

The feature buttons are designed to automate some of the commonly-used functions, such as dialing an outside number. Each of these is described in the table below.

BUTTON

IF YOU...

YOU CAN...

PG.

ANSWER

Press

ANSWER

Answer a call.

22, 25

Press

and dial the number

Place an outgoing call.

24

OUTGOING

OUTGOING

Press an unlit

button or the flashing

Select an outside line or answer a

24, 25

CALL

CALL

button

call.

Press

Access an intercom call.

22

IC

IC

Press unlit or lit

Enable/disable Do-Not-Disturb mode.

45

DND

DND

Press

and dial the numbers you

Place a conference call.

27

CNF

CNF

would like to add to the conference

Press

(International Hold Symbol)

Put a call on hold.

26

Press

and dial the destination

Transfer a call.

28

TRANSFER

TRANSFER

number

Press

View or access System Speed-Dial

62

SYS SPDL

SYS SPDL

numbers.

Press

View or access Speed-Dial numbers.

60

STN SPDL

STN SPDL

Press

Choose a page zone to place a page.

64

PAGE

PAGE

Press

Redial a telephone number or save

32

REDIAL

REDIAL

the last number dialed.

Press

and hang up

Put a call on the speaker.

34

Press

Leave or listen to a message.

36

MSG

MSG

Press

Mute the microphone.

34

MUTE

MUTE

Press

and dial the destination num-

Forward calls to the specified num-

30

FWD

FWD

ber

ber.

Press the high or low end of the volume but-

Adjust volume during a call.

50

ton

In addition to the buttons identified in the preceding table, your endpoint has a Special button (). Depending on how your telephone system is configured, you may need to press this button before you dial a feature code.

NOTE: Because the telephone system allows customized feature buttons, your endpoint may have been reprogrammed so that the feature buttons do not match those described in this guide.

6	Inter-Tel® Model 8560/8660 User Guide

LCD and Menu Buttons

In addition to the various feature buttons, your endpoint contains a Liquid Crystal Display (LCD) with six different lines. The top two lines show call information and messages; the remaining four lines display a menu, which changes according to the feature you are using.

To select an option, press the menu selection button closest to it. If there is only one option on a line, such as DO-NOT-DISTURB, you can press the button on either side.

DISPLAY WITH SIX	MENU
16-CHARACTER
LINES	BUTTONS

Because the display can only support 16 characters, you may see a few abbreviations. The most commonly used abbreviations are provided in the table below.

ABBREVIATION	WORD/PHRASE
ACCT CODE	Account Code
CNF	Conference
DEST	Destination
DIR	Directory
DND	Do-Not-Disturb
EXT	Extension
MSG	Message
RCL	Recall
SPKR	Speaker
SPKRPHN	Speakerphone
STN SPD	Station Speed Dial
SYS SPD	System Speed Dial
TFR	Transfer
TG	Trunk Group (a group of outside lines)
TRNK	Trunk (an outside line)
MISSED (number)	MISSED CALLS

WAY YOUR FINDING

Inter-Tel® Model 8560/8660 User Guide	7

FINDING YOUR WAY

Message Indicator Lamp

The Message Indicator lamp (located at the top, right corner of the endpoint) shows the same indications as the MSG button. The Message Indicator lamp flashes whenever there is a waiting message.

NOTE: By default, the message lamp is programmed to light when you receive a new voice mail message. However, this lamp can be programmed for other functions. Check with your system administrator if you are unsure what your endpoint’s lamp is programmed to indicate.

DSS/BLF and Mini-DSS

Generally, the Model 8450 Direct Station Selection/Busy Lamp Field (DSS/BLF) unit is used by individuals that handle a high volume of incoming calls, such as receptionists. The DSS/BLF provides one-button access to up to 50 extension numbers or a programmable feature. For more information about programming and using the DSS, refer to the current Administrator’s Guide.

NOTE: The Model 8660 does not support the DSS/BLF unit.

The Model 8416 Mini-DSS unit is a scaled-down version of the full-sized DSS/BLF unit. This optional unit adds 16 user-programmable buttons to your endpoint. These buttons can be programmed as any of the following:

•DSS buttons: Provide one-button access to extension numbers and display the status of the extension associated with the button (see page 66).

•Feature buttons: Provide quick access to frequently-used features (see page 65).

•Secondary extensions: Allow one-button access to calls ringing or holding at another station (see page 67).

NOTE: Instructions for attaching the Mini-DSS to your endpoint are included with the unit.

The DSS/BLF and Mini-DSS lamps indicate the status of the extension or feature assigned to the button. These indications are shown in the table below.

If the lamp is...	Then...
Solidly lit	The associated extension is busy, or the associated feature is enabled.
Flashing slowly	The extension is in Do-Not-Disturb.
Flashing rapidly	The extension has a call ringing in.
Fluttering continuously	The extension is causing a STATION OFF-HOOK system alarm.

8	Inter-Tel® Model 8560/8660 User Guide

ABOUT VOICE MAIL

Voice mail is an application that is part of the Inter-Tel voice processing system. Using voice mail, you and other callers can send and receive recorded messages from any supported endpoint on the system. To use voice mail features, each user (or subscriber) is assigned a mailbox, which usually corresponds to the extension number assigned to your endpoint. You can, however, have an unassociated mailbox that does not correspond to an extension. (Unassociated mailboxes are typically used for agents or other personnel who don’t have a permanent office.)

With your mailbox, you can use personal or system greetings to let callers know if you are out of town, on a call, etc. If a caller reaches your mailbox, they can leave a message, hang up, or access an attendant. In addition, if your voice mail administrator sets up one or more “group lists” of mailboxes, you can send a message to a group of people by entering one number instead of everyone’s individual mailbox number.

Inter-Tel voice mail systems support the following types of mailboxes:

•Advanced Mailbox: If E-Mail Reader is enabled for your mailbox, you have access to voice mail, e-mail, and fax messages in your mailbox. You can also customize your personal mailbox options, and access advanced messaging features. See page 81 for information and instructions about using E-Mail Reader features. For a voice mail flowchart for advanced mailbox users, see page 93.

•Standard Voice Mailbox: This type of mailbox allows you to send and receive voice mail messages, record personal greetings, and allows you to customize personal mailbox options. A standard voice mailbox does not allow you to access e- mail and fax messages. For a voice mail flowchart for standard mailbox users, see page 111.

NOTE: If you have the Enterprise® Messaging (EM) voice mail system, you also have access to advanced communication and messaging features such as E-Mail Reader and Automatic Speech Recognition (ARS). For more information about EM, see page 11.

WAY YOUR FINDING

Inter-Tel® Model 8560/8660 User Guide	9

FINDING YOUR WAY

The instructions for many voice mail tasks are identical for standard voice mailbox and advanced mailbox users. The instructions for the following common mailbox tasks are included in the Getting Started and Moving On sections of this guide:

•Initializing your mailbox (see page 18)

•Recording your personal greetings (see page 19)

•Recording your voice mail directory name (see page 20)

•Accessing your mailbox (see page 37)

•Disabling and enabling ASR (see page 38)

•Accessing voice mail messages (see page 39)

•Recording and sending voice mail messages (see page 42)

•Canceling unheard voice mail messages (see page 44)

•Changing your mailbox password (see page 53)

•Changing the call screening transfer method (see page 55)

•Programming a fax destination (see page 56)

•Changing the message search order (see page 57)

•Programming remote messaging (see page 58)

•Screening calls (see page 68)

•Using the voice mail directory (see page 73)

10	Inter-Tel® Model 8560/8660 User Guide

Enterprise Messaging

Enterprise Messaging (EM) is the Inter-Tel messaging system that uses industry-stan- dard protocols for communication and messaging. EM unifies communication and messaging by providing access to voice mail, fax, and e-mail messages in your mailbox. The EM system provides voice mail users with the following advanced messaging features:

•Automatic Speech Recognition (ASR): ASR can be enabled for the entire system or it can be enabled for specific applications (like voice mail) or mailboxes. When ASR is enabled for your mailbox, you can issue spoken commands to navigate the voice mail menus. ASR also allows subscribers and non-subscribers to navigate automated attendant menus, call routing applications, and search the directories. ASR can be enabled for standard voice mailboxes and advanced mailboxes (see page 9). For more information about ASR, see page 12.

•E-Mail Reader: E-Mail Reader allows you to access voice, e-mail, and fax messages from your mailbox. For e-mail messages, E-mail Reader uses Text-to- Speech (TTS) capabilities included with EM to convert the text in an e-mail message to a .wav file. For fax messages, E-Mail Reader announces the fax envelope. If E-Mail Reader has been enabled for your mailbox, your voice mail, e- mail, and fax messages are unified in one convenient location. For more information and instructions about how to use E-Mail Reader features, see the Using E- Mail Reader section, starting on page 81.

Consult your voice mail administrator to see if ASR and/or E-Mail Reader is enabled for your mailbox.

NOTE: EM also includes Unified Messaging inbound and outbound faxing capabilities. For information and instructions about Unified Messaging features, see Issue 2.3 of the

Unified Messaging User Guide, part number 550.8121.

WAY YOUR FINDING

Inter-Tel® Model 8560/8660 User Guide	11

FINDING YOUR WAY

Automatic Speech Recognition (ASR)

Automatic Speech Recognition (ASR) is a feature available for systems using EM. Because ASR is a very flexible feature, it can be enabled or disabled on several different levels. When ASR is enabled for your mailbox, you can issue spoken commands to navigate the voice mail menus. ASR also allows subscribers and non-subscribers to navigate automated attendant menus, call routing applications, and search the directories using voice commands.

When you access voice mail, if you are given the option to say a command or press a dialpad button to complete a task, then ASR is enabled for your mailbox. If you are only prompted to press a dialpad button, ASR is not enabled for your mailbox. If your mailbox is not ASR-enabled, you can still navigate the menus and perform tasks by pressing the appropriate dialpad buttons when prompted by the system.

When using ASR, follow these guidelines for best results:

•When completing a mailbox-related task, either say the command each time or press the dialpad buttons each time.

•Use the handset when issuing spoken commands. Your endpoint’s speaker can pick up background noise and other sounds, which may cause the system to misinterpret a command.

•Voice mail command words are shown on display endpoints. If your endpoint has a display and you don’t hear the command word when the prompt is announced, look at the display for the appropriate voice command.

•When you use the dialpad buttons to complete a task, you are sometimes prompted to press # to indicate to the system that you have finished entering buttons. It is not necessary to say “Pound” or “Hash” when using ASR. The

silence that follows your voice command replaces the # button.

•While you are recording a message, ASR is temporarily disabled, therefore you cannot issue spoken commands to access options like pause and erase. If you attempt to issue a spoken command while you are recording, your recording will include the command you issued. To access the pause and erase options, you must press the appropriate dialpad buttons.

•You cannot use ASR to set up your e-mail password (see page 85). For security reasons, you must enter your e-mail password characters by pressing the appropriate dialpad buttons. Entering passwords this way prevents others from overhearing your password.

•If the system cannot interpret your voice commands for three consecutive attempts, ASR is temporarily disabled by the system for the current call. You can still complete tasks using the dialpad buttons; however, you will no longer be prompted to say a command.

•You can temporarily disable ASR for the current call by selecting option eight from the main menu.

12	Inter-Tel® Model 8560/8660 User Guide

WHAT YOU SEE AND HEAR

As you can see, your Model 8560 and 8660 IP endpoints and telephone system come equipped with many features. To help you understand what everything means, it is recommended that you read the following information before you use your endpoint:

•Your telephone system may be programmed for one or two dial tones. Systems with two dial tones have one for intercom calls and one for outside calls.

•Many features “time out” if you wait too long before performing the next step. If this happens, you must hang up and start again.

•If you hear four fast tones or repeating fast tones, you have pressed an invalid button combination, tried to select a restricted line, dialed a restricted or invalid number, dialed too slowly between digits, or waited too long before performing the next step. Hang up and try again.

•Some endpoints have red and green lamps in the feature buttons. Green indicates a call is ringing, holding, or active on your endpoint. Red means the call is on another endpoint. If the buttons only light red, either your endpoint does not have the green lamps, or the system may not be programmed to support the two lamp colors.

NOTE: Your endpoint may be programmed to always use red lamps for calls ringing directly to your endpoint. If you are uncertain about the configuration, ask your system administrator.

•The button lamps may be solidly lit or flashing to indicate the status of a call or feature. To avoid confusion, this guide uses different icons to signify that a lamp

is unlit ( CNF ), lit ( CNF ), or flashing ( CNF ).

•“Off-hook” means that either the handset is lifted or the speakerphone is on (is lit). “On-hook” indicates that the handset is in the cradle or the speakerphone is off. For example, you must first go “off-hook” to make a call, but you must go “on-hook” to end a call.

•If the MSG button and the Message Indicator Lamp are lit when using a directory or entering a message, you are in alphanumeric mode, which allows you to

enter letters. If the MSG button and the Message Indicator Lamp are unlit, you are in numeric mode and can only enter numbers and special characters.

•“Handsfree” mode indicates that a call is connected through the speakerphone (i.e., you don’t have to lift the handset to speak). While in handsfree mode, you can make or receive calls.

WAY YOUR FINDING

Inter-Tel® Model 8560/8660 User Guide	13

FINDING YOUR WAY

SOFTWARE COMPATIBILITY

Depending upon which software version your telephone system is using, some of the features included in this guide may not be available for your endpoint. Check with your system administrator to see which software version your telephone system currently uses and if there are any features restrictions for your system.

The Model 8560 and 8660 IP endpoints are compatible with Axxess® system software versions 7.0 and later, and Inter-Tel® 5000 system software versions 1.1 and later.

Endpoints using Axxess software versions 3.0 to 6.x have limited functionality in the following areas:

•The STN SPDL button will not work; however, you can still use this feature by dialing the Station Speed-Dial feature code (see page 60).

•The PAGE button will not work; however, you can still use this feature by dialing the Page feature code (see page 64).

• The Message Indicator lamp will not work; however, the MSG button will still function properly (see page 36).

•The dedicated headset audio jack will not work; however, you can still use the headset by plugging the headset into the handset jack and dialing the Headset On/ Off feature code (see page 33).

•The optional Mini-DSS will not work.

• The TRANSFER , ANSWER , OUTGOING , SYS SPDL , and REDIAL lamps will not

light.

The Model 8560 and 8660 IP endpoints are not supported by Axxess software versions 3.0 and earlier.

NOTE: This information about compatibility applies to endpoints programmed to use the default button locations. Your buttons may have been programmed differently. If you are uncertain about the configuration, ask your system administrator.

14	Inter-Tel® Model 8560/8660 User Guide

Getting Started

SECTION CONTENTS

PAGE

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Adjusting Your Endpoint’s Viewing Angle . . . . . . . . . . . . . . . . 16 Adjusting Your Endpoint’s LCD Contrast . . . . . . . . . . . . . . . . . 17 Setting Up Voice Mail. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Initializing Your Mailbox . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Recording Your Personal Greetings. . . . . . . . . . . . . . . . . . . . 19 Recording Your Voice Mail Directory Name. . . . . . . . . . . . . . 20

Making and Receiving Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Intercom Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 Outside Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 Emergency Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 Call Waiting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Placing Calls On Hold . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 Placing Conference Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 Transferring Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

To Another Extension. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 To Voice Mail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 To an Outside Number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

Using Reverse Transfer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 Forwarding Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

Manual Call Forwarding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 Automatic System Forwarding . . . . . . . . . . . . . . . . . . . . . . . . 30 Redirect Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Redialing a Number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 Displaying Information on Your Endpoint . . . . . . . . . . . . . . . . . 32

Date, Time, Name, and Extension Number . . . . . . . . . . . . . . 32 Outside Party’s Name/Number. . . . . . . . . . . . . . . . . . . . . . . . 32

Using a Headset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 Using the Speaker and Microphone . . . . . . . . . . . . . . . . . . . . . . 34

Mute Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 Group Listen Using the Speaker . . . . . . . . . . . . . . . . . . . . . . 34 Enhanced Speakerphone Mode. . . . . . . . . . . . . . . . . . . . . . . 35

Using the Message Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

Leaving Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 Retrieving Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

Accessing Your Mailbox . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 Disabling and Enabling ASR. . . . . . . . . . . . . . . . . . . . . . . . . . . . 38 Accessing Voice Mail Messages . . . . . . . . . . . . . . . . . . . . . . . . 39

Listening to Voice Mail Messages . . . . . . . . . . . . . . . . . . . . . 39 Recovering Deleted Voice Mail Messages. . . . . . . . . . . . . . . 41 Recording and Sending Voice Mail Messages. . . . . . . . . . . . 42 Canceling Unheard Voice Mail Messages . . . . . . . . . . . . . . . 44

Using Do-Not-Disturb Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45 Using Reminder Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47

STARTED GETTING

Inter-Tel® Model 8560/8660 User Guide	15

GETTING STARTED

INTRODUCTION

Now that you know what your endpoint can do, it’s time to start using it. In this section, you’ll learn how to make and receive calls, transfer calls, retrieve voice mail messages, and much more.

ADJUSTING YOUR ENDPOINT’S VIEWING ANGLE

Your endpoint has an adjustable base that allows you to tilt your endpoint to enhance the viewing angle. There are two types of bases available on the endpoint, each of which allow you to adjust the angle of the endpoint. Use the appropriate instructions (listed below) to adjust the angle of your endpoint.

If your endpoint has a support mechanism that fits into holes on the base:

1.Position the bottom of the endpoint’s base on a flat surface.

2.Tilt the endpoint to the desired angle.

3.Place the “feet” of the support mechanism in the holes on the base to secure the position of the endpoint.

If your endpoint has buttons located on the back to release the locking base:

1.Position the bottom of the endpoint’s base on a flat surface.

2.Press both buttons on the back of the endpoint to disengage the base’s locking mechanism.

3.Tilt the endpoint to the desired angle.

4.Release both buttons to lock the base in place.endpoint

NOTE: If you position your endpoint’s viewing angle to 60 degrees or greater, it is recommended that you flip the handset hanger down to the horizontal position.

16	Inter-Tel® Model 8560/8660 User Guide

ADJUSTING YOUR ENDPOINT’S LCD CONTRAST

Your endpoint has a feature that allows you to adjust the Liquid Crystal Display (LCD) contrast. This feature is only available when the endpoint is in the idle state. You can choose from eight different contrast levels by using the volume button, using the LCD menu buttons, or by using the dialpad buttons.

To adjust your endpoint’s LCD contrast:

1.With the handset in the cradle, dial 3 0 3 .

2.Adjust the contrast level of the LCD screen by one of the following methods:

EITHER, Use the volume button ( = darker, = lighter). OR, Use the LCD menu buttons.

OR, Press a number on the dialpad (1=lightest through 8=darkest) that corresponds to your desired contrast level.

3.Accept and save the contrast level by one of the following methods:

EITHER, Press .

OR, Lift and replace the handset.

OR, Press the ACCEPT menu button on the LCD screen.

SETTING UP VOICE MAIL

To begin using your mailbox you will need to complete a few basic set-up procedures to initialize your mailbox, customize your personal greetings, and record your voice mail directory name.

NOTE: If your telephone system uses Enterprise Messaging (EM), your mailbox may have the Automatic Speech Recognition (ASR) feature enabled. When ASR is enabled for your mailbox, you have the option of issuing a spoken command or pressing a dialpad button. See page 12 for ASR guidelines.

ALSO: If your mailbox has E-Mail Reader enabled, you have an advanced mailbox. See page 81 for information and instructions about using E-Mail Reader features.

STARTED GETTING

Inter-Tel® Model 8560/8660 User Guide	17

GETTING STARTED

Initializing Your Mailbox

To access voice mail, the first thing you need to do is initialize your mailbox. This allows you to change the default password for your mailbox, record your name for the company directories, and listen to the voice mail introduction.

To initialize your mailbox:

1. Dial the voice mail extension number. (You hear the main menu.)

NOTE: If you do not know the voice mail extension number, check with your voice mail administrator.

2.Say “Login” or press to identify yourself as a subscriber.

3.Enter your mailbox number using the dialpad buttons.

4.Enter your default password using the dialpad buttons.

NOTE: Your mailbox number is your default password.

If you want a password, enter a new password using digits 0-9 (up to 12 digits), and then press # when you are done. The messaging system plays back your password.

If you do not want to use a password, just say “Skip” or press # .

5. Say “Accept” or press # to accept the entry or say “Erase” or press 3 to erase and re-enter your password. The system prompts you to record your directory name.

6.After the tone, record your first and last names.

7.When prompted, do one of the following:

•	Say “Accept” or press				again to accept the name.
			#
•	Say “Replay” or press				to replay the name you just recorded.
			1
•	Say “Append” or press					to add to your name.
			2
•	Say “Re-record” or press						to erase and re-record your name.
						3

NOTE: The system then plays a prompt that introduces you to the basic voice mail system features. You can skip this introduction by saying “Skip” or by pressing # , if desired.

18	Inter-Tel® Model 8560/8660 User Guide