American Dryer Corp 24 VAC Phase 5 AD-330 User Manual

Size:
1.86 Mb
Download

AD-330/AD-320Parts Manual

24 VAC Phase 5

1992 thru 2001

American Dryer Corporation

88 Currant Road

Fall River, MA 02720-4781

Telephone: (508) 678-9000 /Fax: (508)678-9447

e-mail: techsupport@amdry.com

www.amdry.com

062001MFM/calbert

ADC Part No. 450113

Retain This Manual In A Safe Place For Future Reference

American Dryer Corporation products embody advanced concepts in engineering, design, and safety. If this product is properly maintained, it will provide many years of safe, efficient, andtrouble-freeoperation.

ONLY qualified technicians should service this equipment.

OBSERVE ALL SAFETY PRECAUTIONS displayed on the equipment or specified in the installation manual included with the dryer.

The following “FOR YOUR SAFETY” cautionmust be posted near the dryer in a prominent location.

FOR YOUR SAFETY

POUR VOTRE SÉCURITÉ

Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance.

Ne pas entreposer ni utiliser d’essence ni d’autres vapeurs ou liquides inflammables à proximité de cet appareil ou de tout autre appareil.

We have tried to make this manual as complete as possible and hope you will find it useful. ADC reserves the right to make changes from time to time, without notice or obligation, in prices, specifications, colors, and material, and to change or discontinue models.

Important

For your convenience, log the following information:

DATE OF PURCHASE ____________________________ MODEL NO. __________________________________________

RESELLER’S NAME

_______________________________________________________________________________________

Serial Number(s)

________________________________________________________________________________________

 

________________________________________________________________________________________

 

________________________________________________________________________________________

Replacement parts can be obtained from your reseller or the ADC factory. When ordering replacement parts from the factory, you can FAX your order toADC at (508)678-9447or telephone your order directly to theADC Parts Department at (508)678-9000.Please specify the dryermodel number andserial number in addition to thedescription andpart number, so that your order is processed accurately and promptly.

The illustrations on the following pages may not depict your particular dryer exactly. The illustrations are a composite of the various dryer models. Be sure to check the descriptions of the parts thoroughly before ordering.

“IMPORTANT NOTE TO PURCHASER”

Information must be obtained from your local gas supplier on the instructions to be followed if the user smells gas. These instructionsmust be posted in a prominent location near the dryer.

Table of Contents

AD-330 (3-Leg) Coin and Debit Card Control Doors Assemblies

 

For Models Mfd. as of November 28, 2001 and Models Mfd. prior to June 9, 2001

.................................4

AD-320 (3-Leg) Coin and Debit Card Control Doors Assemblies

 

For Models Mfd. as of November 28, 2001 and Models Mfd. prior to June 9, 2001 .................................

5

AD-330 (3-Leg) OPL Control Door Assembly

 

For Models Mfd. as of November 28, 2001 and Models Mfd. prior to June 9, 2001 .................................

6

AD-320 (3-Leg) OPL Control Door Assembly

 

For Models Mfd. as of November 28, 2001 and Models Mfd. prior to June 9, 2001 .................................

7

AD-330 OPL Control Door Assembly

 

For Models Mfd. Between June 9, 2001 and November 28, 2001 ...........................................................

8

AD-320 OPL Control Door Assembly

 

For Models Mfd. Between June 9, 2001 and November 28, 2001 ...........................................................

9

AD-330 Debit Card Control Door Assembly

 

For Models Mfd. Between June 9, 2001 and November 28, 2001 .........................................................

10

AD-320 Debit Card Control Door Assembly

 

For Models Mfd. Between June 9, 2001 and November 28, 2001 .........................................................

11

AD-330 Lint Door Assembly

 

For Models Mfd. as of June 9, 2001 ...................................................................................................

12

AD-330 Lint Door Assembly

 

For Models Mfd. prior to June 9, 2001 ...............................................................................................

13

AD-320 Lint Door Assembly

 

For Models Mfd. as of June 9, 2001 ...................................................................................................

14

AD-320 Lint Door Assembly

 

For Models Mfd. prior to June 9, 2001 ...............................................................................................

15

AD-330 Lint Drawer (Basket) Assembly .................................................................................................

16

AD-320 Lint Drawer (Basket) Assembly .................................................................................................

17

AD-330 Locking Lint Drawer (Basket) Assembly ....................................................................................

18

AD-320 Locking Lint Drawer (Basket) Assembly ....................................................................................

19

Single Hanke Coin, DMC Control Panel Assembly

 

For Domestic Single Coin (25¢) Models Mfd. as of January 12, 1996 ...................................................

20

Single Coin, Coinco Microprocessor Control Panel Assembly

 

For Single Coin (25¢) Models Mfd. with Coinco Only prior to January 12, 1996 ....................................

21

Dual Coin, Hanke Control Panel Assembly ...............................................................................................

22

Coinco Dual Coin, (DMC) Control Panel Assembly

 

For Export Models Only ....................................................................................................................

23

OPL Microprocessor (DMC) Control Panel Assembly ..............................................................................

24

25¢ Coinco Coin Acceptor Component Listing

 

For Single Coin (25¢) Models Mfd. with Coinco Only prior to January 12, 1996 ....................................

25

Coinco Dual Coin Acceptor Component Listing

 

For Export Models Only ...............................................................................................................

26, 27

Hanke Microprocessor Coin Acceptor Listing ..........................................................................................

28

Coin Vault Assembly ...............................................................................................................................

29

DMC Control Box Assembly ..............................................................................................................

30, 31

Upper Front Panel Assembly

 

For “Plastic Door” ............................................................................................................................

32

Lower Front Panel Assembly

 

For “Plastic Door” ............................................................................................................................

33

“Plastic” Main Door Assembly ................................................................................................................

34

Main Door Switch Assembly For “Plastic” ...............................................................................................

35

AD-330/320 Cold Rolled Steel (CRS) Door Top Front Panel .....................................................................

36

AD-330/320 Cold Rolled Steel (CRS) Door Bottom Front Panel................................................................

37

Main Door Cold Rolled Steel (CRS) Assembly .........................................................................................

38

Main Door Switch Assembly For Cold Rolled Steel (CRS) Type Door .......................................................

39

AD-330 Basket (Tumbler)/Support Assemblies ....................................................................................

40, 41

AD-320 Basket (Tumbler)/Support Assemblies ....................................................................................

42, 43

Basket (Tumbler) Brush Assembly ..........................................................................................................

44

Temperature Sensor Probe Assembly ......................................................................................................

45

Basket (Tumbler) Bearing Assembly ...................................................................................................

46, 47

AD-330 Lint Drawer (Basket) Switch Assembly ......................................................................................

48

AD-320 Lint Drawer (Basket) Switch Assembly ......................................................................................

49

Totally Enclosed, Non-Vent (T.E.N.V.) Motor/Idler Assemblies ............................................................

50, 51

AD-330 Gas Train Assembly

 

For Models Mfd. as of April 17, 2000 with Johnson Controls Direct Spark Ignition (DSI) Module .....

52, 53

AD-330 Gas Valve Train Assembly

 

For Models Mfd. prior to April 17, 2000 ........................................................................................

54, 55

AD-320 Gas Train Assembly

 

For Models Mfd. as of April 17, 2000 with Johnson Controls Direct Spark Ignition (DSI) Module .....

56, 57

AD-320 Gas Valve Train Assembly

 

For Models Mfd. prior to April 17, 2000 ........................................................................................

58, 59

Electric Oven Assembly .....................................................................................................................

60, 61

Burner Box/Piping Assemblies ................................................................................................................

62

ADS-330/ADS-320 Steam Damper Assembly ..........................................................................................

63

Sail Switch Assembly ..............................................................................................................................

64

Back Guard Assemblies ..........................................................................................................................

65

Optional Gas Piping and Exhaust Ducting Kits ..........................................................................................

66

12-Rib 95” (J) Poly Belt Arrangement .....................................................................................................

67

Bottom Exhaust Duct Assembly and Cabinet Hi-Limit ..............................................................................

68

Electric Oven Component Chart ..............................................................................................................

69

Step Down Transformer Usage Listing ....................................................................................................

70

Additional Parts Available .......................................................................................................................

71

4

AD-330(3-Leg)Coin and Debit Card Control Doors Assemblies

 

 

 

 

For Models Mfd. as of November 28, 2001 and Models Mfd. prior to June 9, 2001

 

 

 

 

 

 

 

 

 

Illus. No.

Part No.

Qty.

Description

1

880199*

1

AD-330(3-leg)Coin Control Door Assembly Complete Less Locks

 

 

 

(includes illus. nos. 1 through 6)

 

880198

1

AD-330(3-leg)Stainless Steel Coin Control Door Complete Less Locks

 

 

 

(includes illus. nos. 1 through 6)

2

180315

1

AD-330Lower Door Trim(29-11/16”length)

3

150310

5

#8 x 1/2” Phillips Pan Head “A” Screw

4

180316

1

AD-330Upper Door Trim(29-11/16”length)

5

150310

5

#8 x 1/2” Phillips Pan Head “A” Screw

6

117605

5

Neoprene Sponge Tape (sold by the foot)

 

 

 

For Models Mfd. as of March 6, 1998

 

117602

5

Noise Suppressor Tape (sold by the foot)

 

 

 

For Models Mfd. prior to March 6, 1998

7

160040

2

ACE® Lock Assembly ONLY

8

160140

-

Key ONLY (key number XX4451)

* Specify color when ordering.

American Dryer Corporation

88 Currant Road / Fall River, MA 02720-4781

AD-320(3-Leg)Coin and Debit Card Control Doors Assemblies

5

 

 

For Models Mfd. as of November 28, 2001 and Models Mfd. prior to June 9, 2001

 

 

 

 

 

 

 

 

 

 

Illus. No.

Part No.

Qty.

Description

1

880193*

1

AD-320(3-leg)Coin Control Door Assembly Complete Less Locks

 

 

 

(includes illus. nos. 1 through 6)

 

880192

1

AD-320(3-leg)Stainless Steel Coin Control Door Complete Less Locks

 

 

 

(includes illus. nos. 1 through 6)

2

180315

1

AD-320Lower Door Trim(29-11/16”length)

3

150310

5

#8 x 1/2” Phillips Pan Head “A” Screw

4

180316

1

AD-320Upper Door Trim(29-11/16”length)

5

150310

5

#8 x 1/2” Phillips Pan Head “A” Screw

6

117605

5

Neoprene Sponge Tape (sold by the foot)

 

 

 

For Models Mfd. as of March 6, 1998

 

117602

5

Noise Suppressor Tape (sold by the foot)

 

 

 

For Models Mfd. prior to March 6, 1998

7

160040

2

ACE® Lock Assembly ONLY

8

160140

-

Key ONLY (key number XX4451)

* Specify color when ordering.

Telephone: (508) 678-9000

Fax: (508) 678-9447

6

AD-330(3-Leg)OPL Control Door Assembly

 

 

 

 

For Models Mfd. as of November 28, 2001 and Models Mfd. prior to June 9, 2001

 

 

 

 

 

 

 

 

 

Illus. No.

Part No.

Qty.

Description

1

880936*

1

AD-330(3-leg)OPL Control Door Assembly Complete Less Locks

 

 

 

(includes illus. nos. 1 through 6)

 

 

 

For Models Mfd. as of February 3, 1994

 

880196*

1

AD-330(3-leg)OPL Control Door Assembly Complete Less Locks

 

 

 

(includes illus. nos. 1 through 6)

 

 

 

For Models Mfd. prior to February 3, 1994

 

880197

1

AD-330(3-leg)Stainless Steel OPL Control Door Complete Less Locks

 

 

 

(includes illus. nos. 1 through 6)

2

180315

1

AD-330Lower Door Trim(29-11/16”length)

3

150310

5

#8 x 1/2” Phillips Pan Head “A” Screw

4

180316

1

AD-330Upper Door Trim(29-11/16”length)

5

150310

5

#8 x 1/2” Phillips Pan Head “A” Screw

6

117605

5

Neoprene Sponge Tape (sold by the foot)

 

 

 

For Models Mfd. as of March 6, 1998

 

117602

5

Noise Suppressor Tape (sold by the foot)

 

 

 

For Models Mfd. prior to March 6, 1998

7

160040

2

ACE® Lock Assembly ONLY

8

160140

-

Key ONLY (key number XX4451)

* Specify color when ordering.

American Dryer Corporation

88 Currant Road / Fall River, MA 02720-4781

AD-320(3-Leg)OPL Control Door Assembly

7

For Models Mfd. as of November 28, 2001 and Models Mfd. prior to June 9, 2001

 

 

 

 

 

 

 

 

 

 

 

 

Illus. No.

Part No.

Qty.

Description

1

880935*

1

AD-320(3-leg)OPL Control Door Assembly Complete Less Locks

 

 

 

 

(includes illus. nos. 1 through 6)

 

 

 

 

For Models Mfd. as of February 3, 1994

 

 

880191*

1

AD-320(3-leg)OPL Control Door Assembly Complete Less Locks

 

 

 

 

(includes illus. nos. 1 through 6)

 

 

 

 

For Models Mfd. prior to February 3, 1994

 

 

880189

1

AD-320(3-leg)Stainless Steel OPL Control Door Complete Less Locks

 

 

 

 

(includes illus. nos. 1 through 6)

2

180315

1

AD-320Lower Door Trim(29-11/16”length)

3

150310

5

#8 x 1/2” Phillips Pan Head “A” Screw

4

180316

1

AD-320Upper Door Trim(29-11/16”length)

5

150310

5

#8 x 1/2” Phillips Pan Head “A” Screw

6

117605

5

Neoprene Sponge Tape (sold by the foot)

 

 

 

 

For Models Mfd. as of March 6, 1998

 

 

117602

5

Noise Suppressor Tape (sold by the foot)

 

 

 

 

For Models Mfd. prior to March 6, 1998

7

160040

2

ACE® Lock Assembly ONLY

8

160140

-

Key ONLY (key number XX4451)

* Specify color when ordering.

Telephone: (508) 678-9000

Fax: (508) 678-9447

8

AD-330OPL Control Door Assembly

 

 

 

For Models Mfd. Between June 9, 2001 and November 28, 2001

Illus. No.

Part No.

Qty.

Description

1

883107*

1

AD-330OPL Door Assembly Complete

 

 

 

(includes illus. nos. 1 through 6 and 8)

 

883108

1

AD-330Stainless Steel OPL Door Complete

 

 

 

(includes illus. nos. 1 through 6 and 8)

2

180315

1

AD-330Lower Door Trim(29-11/16”length)

3

150310

5

#8 x 1/2” Phillips Pan Head “A” Screw

4

180316

1

AD-330Upper Door Trim(29-11/16”length)

5

150310

5

#8 x 1/2” Phillips Pan Head “A” Screw

6

117604

3

Neoprene Sponge Tape (sold by the foot)

7

150314

4

#10-32x 1/2” TORX and Bin Head Machine Screw

8

117606

2

5/16” Thick Neoprene Sponge Tape

9

154011

4

#10-32Multi-ThreadU-Nut

* Specify color when ordering.

American Dryer Corporation

88 Currant Road / Fall River, MA 02720-4781