Сooper lighting WaveLinx User Manual
Project Catalog # Type
Prepared by Notes Date
WaveLinx Wireless
Universal Dimming Switchpack
with Dry Contact Input
Wireless 0-10V dimming switchpack for
120-347V lighting applications - includes
low-voltage sensor / contact closure input
Typical Applications
Oce • Education • Healthcare • Hospitality • Retail
Industrial • Manufacturing
Interactive Menu
Product Certication
• Order Information page 2
• Additional Resources page 3
• Wiring Diagrams page 4
• Connected Systems page 7
• Product Warranty
Product Features
IEEE
802.15.4
Top Product Features
• Relay control of loads up to 20amps (including receptacles)
• 0-10V dimming control of up to 15 typical ballasts / LED drivers
• Plenum rated
• Fails safe to 100% if communications are lost
• Energy calculations available through Trellix based on max load input
• Greengate low-voltage sensor integration or contact closure input
Dimensional Details
3.5"
[90mm]
1.7"
[41mm]
Part
15/ICES-003
Device
Security
Customer
Security
• Meets latest ASHRAE Standard 90.1 requirements
• Meets latest IECC requirements
• Meets latest CEC Title 24 requirements
• Manufactured in an ISO 9001 certied factory
Receptacle
Control
2.7"
[67mm]
2.2"
[55mm]
PS503157EN page 1
March 2021
WaveLinx Wireless
Universal Dimming Switchpack
Order Information
The WaveLinx Universal Dimming Switchpack with Dry Contact Input is an accessory to the WaveLinx Connected Lighting (WCL) system and requires a Wireless Area
Controller (WAC) for full functionality.
The wireless relay is used to control plug loads or luminaires that do not include WaveLinx integrated controls. Greengate low-voltage occupancy (PIR or Dual Tech)
sensor integration or contact closure input is also available for a control area.
Catalog Number
Catalog Number Description
WSP-CA-010 WaveLinx Universal Dimming Switchpack with Dry Contact Input
Required Accessories
All WaveLinx Connected Lighting (WCL) system accessories require at least one Wireless Area Controller (WAC) for communications. Ensure the bill of material includes one
of the following components.
Catalog Number
Catalog Number Description
WAC-POE Wireless Area Controller, POE powered
Optional Accessories
For connection to 120VAC outlets.
Catalog Number
Catalog Number Description
WPOE-120 120VAC to PoE Injector
Product Specications
Key Features
• Output control for the following:
• 0-10V continuous dimmable luminaries
• LED loads up to 20A
• Receptacle loads up to 20A
• Plenum rated design with easy junction box mounting
• Recommended branch circuit connection for 347VAC (120-347VAC)
• Designed with safety in mind, at loss of communications with Wireless
Area Controller, the wireless relay switchpack will turn ON and set
dimmer to 70% light level
• Fails safe if communications is lost
• Greengate low-voltage sensor integration OR
maintained contact closure input
(not an ALERT override for alarm input)
Mechanical
Size: 3.5”L x 2.7”W x 1.6”H (90mm x 68mm x 40mm)
Weight: 6.3 oz (178 g)
Environment:
• Operating temperature:
20A: -40°F to 131°F (-40°C to 55°C)
10A: -40°F to 149°F (-40°C to 65°C)
• Storage temperature: 32°F to 158°F (0°C to 70°C)
• Relative humidity operating: 10% to 90% RH (non-condensing)
• For indoor use only
Mounting: Mounts to the side of a 4” (102mm) square box
via ½” (13mm) knockout
Color: Black
Housing: Injection molded housing, ABS resin with V-0 ame rating.
Plenum rated for external junction box mounting.
Electrical
Power:
• 120-347VAC (+/- 10%) 50/60Hz
• 10A (347VAC)
Output Information:
• 20amp 120-347VAC General Purpose
• 16amp 120-347VAC electronic ballast (LED load)
• Single class 2 0-10V dimming output (IEC 60929 Annex E)
capable of sinking up to 30mA
• 0-10V output supports up to 15 typical ballasts / LED drivers
(assuming 2mA per typical ballast / driver)
Wireless Specifications
Radio: 2.4GHz
Standard: IEEE 802.15.4
Transmitter Power: + 7dBm
Range: 150ft (46m) LOS
50ft (15m) through standard walls when mounted outside junction box
System Performance
Maximum number of Devices: 150 per Wireless Area Controller
(best practice 100 devices)
Standards/Ratings
• cULus Listed - Energy Management Equipment (UL916)
• RoHS Compliant
• Manufactured in an ISO 9001 certied factory
• Meets latest ASHRAE Standard 90.1 requirements
• Meets latest IECC requirements
• Meets latest CEC Title 24 requirements
Warranty
Five year warranty standard
PS503157EN page 2
March 2021
WaveLinx Wireless
Universal Dimming Switchpack
System architecture
This diagram shows the main components of the WaveLinx Connected Lighting (WCL) system. The WaveLinx system communicates using wireless mesh technology based
on the IEEE 802.15.4 standard. A POE LAN connection for each Wireless Area Controller (WAC) is required for power and data access to the building wireless network. System
setup is achieved through a simple mobile application via wireless communication to the system.
BACnet/IP
Public (REST) API
Third Party system
(hardware provided
by others)
Building LAN
BACnet Router1
(hardware provided
by others)
Touchscreen
Area or Room
(15 + 1 construction area)
347V and 20A
Dimming Relay
Wireless Controlled Lighting ready devices
(up to 150 per WAC)
Occupancy Sensor
PoE
Power
Room Based
Desktop/Laptop
with web browser
(hardware provided
by user)
Wireless Area
Controller
Controlled
Receptacle
Scene
Wallstation
Trellix Core
WaveLinx Mobile App
used for system
setup and
personal control
WaveLinx-Integrated
Ambient
Area or Room
(15 + 1 construction area)
Area or Room
(15 + 1 construction area)
WaveLinx-Integrated
Outdoor
KEY
Wi-Fi Signal
IEEE 802.15.4
Note:
Trellix Core Pro shown in this illustration.
Trellix Core hardware can be either Pro,
Enterprise or Virtual.
1
BACnet Router only required if
Trellix Core and third party BACnet client
are on differenet subnets.
Overview
The Wavelinx Universal Dimming Switchpack with Dry Contact Input (WSP-CA-010) control is an integral part of the WaveLinx Connected Lighting (WCL) system and offers
120-347VAC 20amp zero crossing relay control and continuous 0-10V dimming control of LED and non-LED loads. The 347V Dimming Switchpack also supports 20amp
plug load control. The WSP-CA-010 is powered by the 120-347VAC circuit it is controlling and provides simple 1/2" knockout mounting. The Universal Dimming Switchpack
operates on a wireless mesh network based on IEEE 802.15.4 standards.
The WaveLinx Universal Dimming Switchpack with Dry Contact Input may also be used to integrate Greengate low-voltage occupancy (PIR or Dual Tech) sensors or contact
closure input for a control area.
WaveLinx Mobile Application is used to commission contact closure behavior either as a sensor input or a contact closure. When used as a contact closure, the closure
action may be used to drive one of up to 16 dened scenes.
PS503157EN page 3
March 2021
Loading...