ZyXEL STB-1001S2 User Manual

Page 1
STB-1001S2
Set-Top Box
Firmware v1.00 Edition 1, 09/2008
QUICK START GUIDE
www.zyxel.com
Copyright 2008 ZyXEL Communications Corporation
C
Page 2
Front and Rear Panels
ON/OFF POWER
POWER
LED
USB
PORT
LAN
PORT
LAN LED
REMOTE
S/PDIF AUDIO INPUT
LED
VIDEO INPUT
LEFT/RIGHT
AUDIO
INPUT
Page 3
ENGLISH
STB-1001S2
Overview
The STB-1001S2 is a set-top box that connects your television to the Internet. Use the STB-1001S2 to watch Internet television (IPTV) or Video on Demand (VOD) on your regular TV.
A: Your STB-1001S2.
B: Your Internet access device (such as a broadband router or modem).
C: Your TV.
D: Your STB-1001S2’s remote control
INTERNET
B
A
STB-1001S2
C
D
This Quick Start Guide shows you how to do the following.
1. Make Hardware Connections.
2. Turn the STB-1001S2 On.
3
Page 4
ENGLISH
3. Use the Remote Control.
4. Use the Menu System: TV and Video.
It also includes a Remote Control Button Reference section.
4
Page 5
ENGLISH
STB-1001S2
Make Hardware Connections
Take the following steps to set up your STB-1001S2’s hardware connections. Use either the cables that came with your STB-1001S2, or those that came with your TV or Internet access device.
1. Connect your TV (and audio system, if required) to the STB-1001S2’s
audiovisual ports using either the included cables or those that came with your TV. Refer to the next figure for some example connections.
2. Connect your Internet access device (such as a broadband modem or router) to the STB-1001S2’s LAN port.
3. Using the included power adaptor, connect the STB-1001S2’s POWER port to a suitable power source.
5
Page 6
ENGLISH
The STB-1001S2 has a variety of options for connecting your TV (and audio system). Use the hardware connections best suited to your equipment; the following figure shows some examples.
• If your TV or audio system has a coaxial S/PDIF jack, use RCA cables to
connect it to the STB-1001S2’s S/PDIF and CVBS (video) jacks. If you use the red connector to connect to the S/PDIF jack on the STB­1001S2, make sure you use the red connector to connect to the S/PDIF jack on your TV or audio system.
• If your TV or audio system does not have a coaxial S/PDIF jack, use
RCA cables to connect it to the STB-1001S2's L, R and CVBS (video) jacks. Make sure the color of your connectors matches the jack it is using.
6
Page 7
ENGLISH
STB-1001S2
Turn the STB-1001S2 On
Once you have made the hardware connections, take the following steps to start up the STB-1001S2.
1. Turn your television on. Change it to the channel or setting you normally use to watch videos or DVDs. For example, select the “VIDEO” input option, or press the “AV” button (look at the documentation that came with your TV if you are not sure what to do).
2. Press the ON/OFF button on the rear of the STB-1001S2.
The light on the front of the STB-1001S2 lights up. It blinks while the STB-1001S2 is starting up, then shines steadily green once the STB­1001S2 is ready (this may take a little while).
The light on the front of the STB-1001S2 turns green once the STB­1001S2 has finished starting up.
If the or lights do not behave as expected, first check the
STB-1001S2’s connections. Make sure that the power is on and the Internet access device is working. If this does not help, restart the STB-1001S2 (switch it off, then on using the ON/OFF switch on the rear panel). If the problem persists, contact your vendor.
3. A start-up picture displays on the television. When the STB-1001S2 has successfully started up, the Home menu displays. Your STB-1001S2 is ready to use!
7
Page 8
ENGLISH
The TV pictures shown in this Quick Start Guide are examples; what you see may be different (depending on your IPTV service provider).
EX
A
M
P
LE
8
Page 9
ENGLISH
STB-1001S2
Use the Remote Control
Before you first use the remote control, take the following steps to insert two AAA-size batteries.
1. Press the battery cover release catch in and lift the cover off.
2. Press the batteries into the compartment. The negative (-) end of each
battery should be at the end of the slot that has a spring.
3. Replace the cover.
9
Page 10
ENGLISH
Remote Control Quick Reference
The following picture shows your STB-1001S2’s remote control, and identifies the buttons you need to use in this Quick Start Guide.
See Remote Control Button Reference on page 14 if you need more information.
10
Page 11
ENGLISH
STB-1001S2
Use the Menu System: TV and Video
The STB-1001S2’s menu system allows you to select the TV channels and Video on Demand (VOD) services you want to watch from your service provider. Use the remote control to navigate the menu system.
This is only an example - the actual menus you see depend on your IPTV service provider.
When the STB-1001S2 is ready to use, the Home menu displays. Use the HOME key on the remote control to return to this menu at any time.
1. Select the Live TV or VOD option (use the navigator’s and keys, and the OK key).
E
XAMP
LE
11
Page 12
ENGLISH
For Live TV, the channel selection menu displays.
EXAMPLE
For VOD, the VOD menu appears.
E
XAMPLE
2. For Live TV, highlight the channel you want to watch using the navigator’s
and keys. The small screen on the bottom right shows the current
program.
For VOD, highlight the video you want to watch.
12
Page 13
ENGLISH
STB-1001S2
3. Press the OK key. The program is shown in full screen.
4. For Live TV, use the CHANNEL + and - keys to change the channel.
For VOD, use the video controls to rewind, fast-forward, pause and so on.
If you want to return to the HOME menu, press the HOME key.
13
Page 14
ENGLISH
Remote Control Button Reference
The following figure shows the front of the STB-1001S2’s remote control, and identifies its buttons.
14
Page 15
ENGLISH
STB-1001S2
The following table describes the remote control’s button functions.
BUTTON FUNCTION
On / Standby Turns the STB-1001S2 on, or puts it in standby mode (use the ON/
OFF switch on the STB-1001S2’s rear panel to turn it off).
L/R Use this to change the audio balance between the left and right
speakers.
Alphanumeric Keypad Use these to enter numbers, letters and symbols (see Entering
Numbers, Letters and Symbols on page 16).
Volume + / - Turns the sound from the STB-1001S2 up or down (you may also
need to alter your TV’s volume).
Mute Turns the sound on or off.
Replay / Channel Return
Channel + / - Changes the channel up or down.
Navigator Use the direction keys ( , , and ) to move around the STB-
Delete Deletes a character.
Home Returns to the main menu page.
Page Scrolls long pages up or down.
Video Controls Use these to control the video you are watching:
When you are watching pre-recorded video, use this to replay the last few seconds. When you are watching live TV, use this to return to the previous channel. For example, if you move from channel 1 to channel 2, then press this button, you go back to channel 1.
1001S2’s menus, and use the OK key to select an option, or confirm a change.
: Play : Stop : Pause : Fast forward : Rewind : Next chapter : Previous chapter
15
Page 16
ENGLISH
BUTTON FUNCTION
Help Use this to go to the help page (if supported by your service
provider).
Menu Accesses the STB-1001S2’s setup menus.
Rec This key is reserved for future use.
Color Keys These keys are reserved for future use.
Keyboard Allows you to enter letters and symbols.
Back Returns to the previous page in the menu.
Entering Numbers, Letters and Symbols
Use the alphanumeric keypad (0 ~ 9, # and *) to enter numbers, letters and symbols.
Numeric Mode: To enter numbers, just press the keypad keys normally.
Alphanumeric Mode: To enter letters and symbols as well as
numbers, press the KEYB (keyboard) key. When you next press a keypad key all the options display.
• Press the keypad key multiple times to highlight the character
you want to enter. Then, press the navigator’s key to enter the character.
• To go back to numeric mode, press the KEYB key again.
The following table shows the characters you can enter.
1. : / ,
2a b c
3d e f
4g h i
5j k l
16
Page 17
ENGLISH
STB-1001S2
6m n o
7p q r s
8t u v
9w x y z
0 [SPACE] -_?!~@
*| % ^ & * ( ) + = [
] { } ‘ =, <>\ $
#
17
Page 18
ENGLISH
Licensed Hardware Codecs
Supply of this product does not convey a license or imply any right to distribute content created with this product in revenue-generating broadcast systems (terrestrial, satellite, cable and/or other distribution channels), streaming applications (via Internet, intranets and/or other networks), other content distribution systems (pay-audio or audio-on-demand applications and the like) or on physical media (compact discs, digital versatile discs, semiconductor chips, hard drives, memory cards and the like). An independent license for such use is required. For details, please visit http:// mp3licensing.com.
Viewing a Product’s Certification(s)
18
1. Go to www.zyxel.com.
2. Select your product from the drop-down list box on the ZyXEL home page to go to that product's page.
3. Select the certification you wish to view from this
page.
Loading...