Page 1
P-630-S Series
ADSL USB Modem
Quick Start Guide
Version 1.0
7/2005
Page 2
P-630-S Series Quick Start Guide
Overview
The Prestige 630-S (P-630-S) allows you to have high-speed ADSL Internet
access from a computer via a USB connection.
See the User’s Guide for more information on all features.
1 Installing the USB Driver
System Requirements:
• Windows 98 SE (Second Edition), Windows Me (Millennium Edition), Windows
2000 or Windows XP
or
Macintosh operating system versions 9.1 or later
• An available USB port
1.1 Windows
Screen shots for Windows XP are shown in the following procedure.
Note: You must start the driver setup wizard before connecting the
Prestige to your computer.
1 Close all Windows programs and applications.
2 Insert the CD that came with
your Prestige into the CD-ROM
of your computer. The main
screen displays as shown. Click
Setup. If the setup does not run
automatically, double-click
Setup.exe from the
CD.
2
Page 3
P-630-S Series Quick Start Guide
3 Wait until you are prompted to connect your Prestige's USB cable to the
computer.
Connect the USB cable to a USB port on your computer.
4 When the installation is completed, you will see this window. Click OK to
close the wizard.
5 Connect the Prestige’s DSL port to a telephone jack using the included
telephone wire.
3
Page 4
P-630-S Series Quick Start Guide
The USB LED turns on when you have a successful USB connection. The DSL
LED blinks during DSL line initialization and turns steady green when the
Prestige has a DSL connection.
USB
DSL
1.2 Mac
The following two sections describe how to install your and modem for both
Mac OS 9 and X.
Mac OS 9
Screens for Mac OS 9.2 are shown in this section.
1 Close all programs and applications.
2 Insert the included CD into the CD-ROM
drive. An icon for the CD appears. Doubleclick the CD's icon.
3 Double-click the Mac 9
driver folder.
4
Page 5
P-630-S Series Quick Start Guide
4 Double-click
SM9A.1.0.C0.smi.sit.
5 Select a folder or click Add to
create a new folder to where
you want to extract this .sit file
and click Choose.
6 The file ADSLModem
2.0.20.smi will be created
in the folder you selected.
Double-click ADSLModem
2.0.20.smi.
7 The ADSLModem 20.2 icon will display on the desktop.
Double-click ADSLModem 20.2.
5
Page 6
P-630-S Series Quick Start Guide
8 Double-click Driver.
9 Double-click Installation of
ADSL Modem to install the
driver.
10Click Switch Disk to select
a destination (this must be
on an actual physical hard
drive on the Macintosh, not
a virtual drive) and click
Install.
6
Page 7
P-630-S Series Quick Start Guide
11Click Restart to reboot
your computer and
complete the driver
installation.
Mac OS X
Screens for Mac OS 10.3 are shown in this section.
1 Close all programs and applications.
2 Insert the included CD into the CD-ROM drive. An
icon for the CD appears. Double-click the CD's
icon.
3 Double-click the
Mac X driver
folder.
7
Page 8
4 Double-click
(SMXA.1.0.C0)B
1.sit.
5 Select a folder
or click New
Folder to create
a new folder to
where you want
to extract this
.sit file and click
Choose.
P-630-S Series Quick Start Guide
6 The file
ADSLModem.pk
g will be created
in the folder you
selected.
Double-click
ADSLModem.pk
g to install the
driver.
8
Page 9
7 A welcome screen
appears. Click Continue.
8 Click Continue.
P-630-S Series Quick Start Guide
9 A screen displays asking
you to agree to the
agreement. Click Agree.
9
Page 10
P-630-S Series Quick Start Guide
10You will then see the
Select a Destination
screen, select a
destination (this must be
on an actual physical hard
drive on the Macintosh, not
a virtual drive) and click
Continue.
11Click Upgrade.
12You then see a screen
telling you that you must
restart the computer after
the installation completes.
Click Continue
Installation. The driver will
automatically install.
10
Loading...