Zylux Acoustic Y12121 User Manual

™

PACKAGE CONTENTS

™

™

™

YARRA3DX

MUTE

BT

BASS

SUBVOL

+

BOOST

UP

SUBVOLDNPRESET

-

+

PRESET1PRESET2PRESET

3

MOVIE GAME

MUSIC

Remote control

HDMI cable

*The power cable will vary from country to country.

Power cable AC/DC

adapter

RCA cable USB A to USB B Subwoofer power cableOptical cable

FEATURES

Front

1

19

Left Side Right Side

5

4

3

9

Back

12

11

Bottom

Subwoofer RCA cable 3.5 to 3.5 mm cable

2

10

13

14

20

15

Subwoofer

6

8

16 17 18

DESCRIPTION FUNCTION

1

LED indicator

(Power) button and

2

indicator

3

(Source) button

Lights when modes/inputs are changed. Single green illuminated when powered on.

Connecting the YARRA 3DX soundbar

Far right LED blue when Dolby decoder active, Red when non Dolby stream is active.
Flashes all LEDs Blue when entering CEC standby.

Press to turn on the soundbar. Led indicators display startup sequence. Press again
to return the soundbar to standby mode.

Press repeatedly to cycle through the available sound sources:

Source 1 - HDMI

Source 6 - ARC

Source 2 - Optical

Select an option to connect that is suitable for your audio source device (for example, television, DVD/Blu-Ray player
or video game console).

CAUTION: Turn off or unplug all devices while connecting cables.
NOTE: If you are mounting your Yarra 3DX to the wall, you will need to use right angle connectors for the auxiliary or RCA
input connections.

Source 3 - USB
Source 4 - AUX

QUALITY OF AUDIO

CONNECTING THE SUBWOOFER

Connect one end of the subwoofer speaker
cable to the subwoofer and the other end to
the Yarra 3DX.

TYPE OF CONNECTION CABLE

Subwoofer

Subwoofer cable

Back of Yarra 3DX

Source 5 - Bluetooth

EQ mode and DSP

4

(Digital Signal Processor)
button

Press repeatedly to cycle through the available DSP sound modes:

Movies - Best for enjoying movies. Bass frequencies are enhanced.
Music - Best for enjoying music. EQ tuned to showcase highs & lows.

BEST

GOOD

Optical

3.5 mm

SUB OPTICAL

USB HEADPHONE

AUX

Gaming - Best for enjoying games. EQ tuned to help 3D locate sounds.

Number of listeners button

5

VOL up button

6

Bluetooth® button

7

VOL down button

8
9

Near Field and Far Field
button

Hanging bracket holes

10
11

HDMI IN If your device (Xbox, Playstation, Blu-ray Player, etc.) has an HDMI OUT, connect an

Press to cycle between One, Two, or Three Listener setup.
Press to increase volume.
Use to enter Bluetooth® pairing mode.
Press to decrease volume.
Press to cycle between Near Field and Far Field modes. Far Field is

recommended for listening distances beyond four feet from Yarra 3DX.
Used to hang the Yarra 3DX on a wall.

HDMI cable to your source device and this jack.

12

SOURCE 1 - HDMI OUT (ARC) If your TV (or other audio source device) has an HDMI IN, connect an

GOOD

Optical connections

1 Connect one end of an optical cable to the sound bar. Connect the other end of the optical cable into the output port
of the audio source.
2 Make sure the audio settings in the output device are set to PCM format. Refer to the documents that came with your
audio source device for more information.
3 Plug in the power cable into the Yarra 3DX soundbar and then into the outlet.

RCA

CONNECTING THE POWER ADAPTER

1. Make sure the electrical outlet matches the input
requirements before connecting.

2. Connect the power adapter to the jack on the back
of the Yarra 3DX.

3. Plug the other end into a power outlet or surge

SUB OPTICAL USB HEADPHONE AUX DC

HDMI cable to your source device and this jack.

13

SUBWOOFER OUT jack Use this jack to connect the included subwoofer.

14

7

SOURCE 2 - OPTICAL
jack

15

SOURCE 3 - USB jack If your PC has a USB out, connect a USB cable to your source device and this jack.

If your device (Xbox, Playstation, Blu-ray player, etc.) has an Optical out, connect an
Optical cable to your source device and this jack.

16

HEADPHONE jack Use this jack to plug in headphones.

17

SOURCE 4 - AUX jack If your TV (or other audio source device) has a 3.5 AUX out, connect a 3.5

mm audio cable to your source device and this jack.

18

DC IN jack

19

Extendable legs Pull on knobs to extend legs.

20

Ambient LEDs Use Yarra 3DX app to change color of LEDs

DESCRIPTION FUNCTION

Power Press to turn on soundbar

1
2

Bluetooth® Press to enter Bluetooth® pairing

3

Mute Press to mute sound

4

Input Press to change input source

5

Near/Far switch Changes to Near or Far Field

6

Listeners Changes number of listeners
Subwoofer VOL up Press to increase subwoofer volume

7

Bass Boost Increases bass

8

VOL up Press to increase volume

9

Subwoofer VOL down Press to decrease subwoofer volume

10

Toggle preset Press to toggle Preset Bank

11

VOL down Press to decrease volume

12

Preset 1 Press to change to preset 1

13

Preset 2 Press to change to preset 2

14

Connect the power adapter to this jack to power the Yarra 3DX.

REMOTE BUTTONS

MUTE

BT

BASS

SUBVOL

BOOST

UP

SUBVOLDNPRESET

+

PRESET1PRESET2PRESET

MOVIE GAME

DESCRIPTION FUNCTION

15

Preset 3 Press to change to preset 3

16

Movie Press to use Movie EQ

17

Game Press to use Gaming EQ

18

Music Press to use Music EQ

In order from left to right,
top to bottom

+

-

3

MUSIC

Auxiliary connections

1 Connect one end of a 3.5 mm cable to the sound bar. Connect the other end of the 3.5 mm cable into the output port
of the audio source.
2 Plug in the power cable into the Yarra 3DX soundbar and then into the outlet.

RCA connections

Connect the 3.5 mm cable to the sound bar. Connect the other Right and Left ends into the output port of the audio source.

1
2 Plug in the power cable into the Yarra 3DX soundbar and then into the outlet.

NOTE: Make sure the colors of the colors match the colors of the ports.

SOURCE
OPTICAL

OUTPUT

YARRA 3DX

OPTICAL

INPUT

YARRA 3DX

AUX

INPUT

SOURCE

AUX

OUTPUT

SOURCE

RCA

OUTPUT

YARRA 3DX

AUX

INPUT

protector.

LED INDICATORS

Operational Modes:

MOVIES magenta
GAMING green
MUSIC blue

Volume:

Minimum VOL
Maximum VOL

Field:

Near Field
Far Field

Listeners:

1 Listener
2 Listener
3 Listener

*example shown in gaming mode

*example shown in movies mode

*example shown in music mode

Input:

HDMI
OPTICAL
USB

AUX
BLUETOOTH
ARC

Bass Boost Button:

ON:

OFF:

*example shown in gaming mode

Each press of the bass boost button toggles bass
boost on and off. LEDs will indicate a change was
made by displaying the following patterns:

on for 200ms

on for 200ms
on for 200ms

on for 200ms

on for 200ms

on for 200ms
on for 200ms
on for 200ms

*example shown in movies mode

LEGAL & COMPLIANCE

Declaration of Conformity (DoC)

Hereby, Comhear Inc. declares that this product is in compliance with the essential requirements and
other relevant provisions of Directive 2014/53/EU.

Eligible to bear the CE mark; Conforms to European Union Low Voltage Directive 2014/35/EU; European
Union EMC Directive 2014/30/EU; European Union Restriction of Hazardous Substances Recast (RoHS)
Directive 2011/65/EU;European Union Eco-Design Directive 2009/125/EC;
European Union Radio Equipment Directive (RED), 2014/53/EU.

Frequency bandType of wireless Maximum power (dBm E.I.R.P.)

Bluetooth® 2402 – 2480 MHz 10 dBm

Disposal of Old Equipment and Batteries
Only for European Union and countries with recycling systems

These symbols on the products, packaging, and/or accompanying documents
mean that used electrical and electronic products and batteries must not be mixed
with general household waste. For proper treatment, recovery and recycling of old
products and used batteries, please take them to applicable collection points in
accordance with your national legislation. By disposing of them correctly, you will
help to save valuable resource and prevent any potential negative eects on
human health and the environment. For more information about collection and
recycling, please contact your local municipality. Penalties may be applicable for
incorrect disposal of this waste, in accordance with national legislation.

Note for the battery symbol (bottom symbol): This symbol might be used in
combination with a chemical symbol. In this case it complies with the requirement
set by the Directive for the chemical involved.

Importer for Europe:
DSV Air & Sea Netherland B.V.
Fokkerweg 300, Gebouw 3A
1438 AN, Oude Meer
The Netherlands
Phone: [phone]
Fax: [phone]

FCC Statement

1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:(1) This device may not cause harmful interference, and (2) This device must accept
any interference received, including interference that may cause undesired operation.

2. Any changes or modications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This equipment
generates uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment o and on, the user is encouraged to try to correct
the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.

-

- Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help.

FCC RF Radiation Exposure Statement

1. This transmitter must not be colocated or operating in conjunction with any other

antenna or transmitter.

2. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled

environment. This equipment should be installed and operated with minimum distance
20cm between the radiator & your body.

Innovation, Science and Economic Development (ISED) Canada Statement.

-English

This device complies with Industry Canada’s license-exempt RSSs. Operation is
subject to the following two conditions: (1) This device may not cause interference; and
(2) This device must accept any interference, including interference that may cause
undesired operation of the device.

- French:

Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio
exempts de licence. L'exploitation est autorisée aux deux conditions suivantes :
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage
est susceptible d'en compromettre le fonctionnement."

WARNING: DO NOT INGEST BATTERY, CHEMICAL BURN HAZARD

CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or
equivalent type.
WARNING: The battery (battery or batteries or battery pack) shall not be exposed to excessive heat such
as sunshine, re or the like.

This equipment is a Class II or double insulated electrical appliance. It has been designed in such a way
that it does not require a safety connection to electrical earth. (For Subwoofer only)

This unit is intended for use in moderate climates.

AVIS:

RISQUE DE CHOC ELECTRIQUE-NE PAS OUVRIR

This lightning ash with arrowhead symbol within an equilateral triangle is intended to alert the user to the
presence of non-insulated “dangerous voltage” within the product's enclosure that may be of sucient
magnitude to constitute a risk of electric shock.

- Warning: To reduce the risk of electric shock, do not remove cover (or back) as there are no user-serviceable
parts inside. Refer servicing to qualied personnel.

- The exclamation point within an equilateral triangle is intended to alert the user to the presence of important
operating and maintenance instructions in the literature accompanying the appliance.

Date of Manufacture: The eighth digit in the serial number indicates the year of manufacture; “7” is 2007 or 2017.
Amazon, Kindle, Fire and all related logos are trademarks of Amazon, Inc. or its aliates.
Apple and the Apple logo are trademarks of Apple Inc., registered in the U.S. and other countries. App Store is a
service mark of Apple Inc.
Android, Google Play, and the Google Play logo are trademarks of Google Inc.

Dolby, Dolby Audio and the double-D symbol are trademarks of Dolby
Laboratories.

TM

The terms HDMI and HDMI High-Denition Multimedia Interface, and the HDMI logo

HIGH-DEFINITION MULTIMEDIA INTERFACE

are trademarks or registered trademarks of HDMI Licensing LLC in the United States
and other countries.

The Bluetooth® word mark and logos are registered trademarks owned by
Bluetooth SIG, Inc. and any use of such marks by Comhear is under license.
Other trademarks and trade names are those of their respective o

wners.”

a. The remote control supplied with this product contains a coin/button cell battery. If the coin/ button
cell battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to death.
b. Keep new and used batteries away from children.
If the battery compartment does not close securely, stop using the product and keep it away from children.
c. If you think batteries might have been swallowed or placed inside any part of the body, seek
immediate medical attention.

Yarra 3DX and Comhear are trademarks of Comhear in the U.S. and other countries.
Comhear 2018