Zylux Acoustic BKDW45 User Manual

TURN ON THE MASTER SWITCH

fli

k

You won’t be able to operate Flicks without turning on the master switch located at the bottom of Flicks

CHARGE YOUR FLICKS

Fully charge your Flicks using the included power
adapter before first use. It would take approximately 4
to 10 hours to fully charge your Flicks depending on
the Flicks models you purchase.

• 140WH Flicks model fully charged in 4 to 6 hours

• 280WH Flicks model fully charged in 8 to 10 hours

WATCH MOVIES ON FLICKS

TURNING ON PROJECTOR

1.Press and hold the projector power button for 2 seconds to
turn on the projector. The speakers will turn on automatically
along with the projector so you don’t need to do anything else.

2.Connect Flicks to your HDMI-compatible device using the
included HDMI cable.
ADJUSTING VOLUME
Adjust the volume of your movie by pressing the + and ­buttons located on the top panel of Flicks.
ADJUSTING FOCUS
Rotate the focus ring clockwise/counterclockwise to sharpen
the image.
TURNING OFF PROJECTOR
Press and hold the projector power button for 2 seconds and
follow the on-screen instruction to turn off the projector by
pressing the projector power button again.

c

s

Quick Start Guide

LISTEN TO BLUETOOTH MUSIC ON
FLICKS

TURNING ON SPEAKER

1.Press and hold the speaker power button for 2
seconds to turn on the speakers.

2.Turn on Bluetooth on your Bluetooth-enabled device.

3.When prompted, select “Dashbon Flicks” to pair. It
may take up to a minute to pair.

ADJUSTING VOLUME
Adjust the music volume by pressing the + and ­buttons located on the top panel of Flicks or the volume
buttons on your Bluetooth-enabled device.

TURNING OFF SPEAKER
Press and hold the speaker power button for 2 seconds
to turn off the speaker.

WARNING !

Do not look directly into the projector beam